Ultramid® A27 E is a polyamide 66 grade for compounding.

Ultramid® B22 NE 01 is a polyamide 6 for compounding.

Ultramid® B24 N 02 is a light stabilized polyamide 6 for the production of bright textile fibers. The polymer is especially suitable for high speed spinning.

Ultramid® B25 EX is a low viscosity, bright polyamide 6 polymer suitable for spinning and compounding applications.

Ultramid® B27 02 is a polyamide 6 for the production of bright textile and carpet fibers.

Ultramid® B27 12 is a polyamide 6 for the production of bright textile and carpet fibers.

Ultramid® B27 E 01 is a polyamide 6 grade of low viscosity that is well suited for compounding and the production of monofilaments.

Ultramid® B27 EX is a polyamide 6 grade of low viscosity that is well suited for compounding and the production of monofilaments.

Ultramid® B27 HM 01 is a low viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. It possesses a balance of performance properties including flexibility, toughness and abrasion resistance combined with excellent chemical resistance to gasoline, oil and other hydrocarbons. It is a preferred resin for wire conductor jacketing, including shipboard cable, and non-metallic-sheathed cable primary jacketing.

Ultramid® B27 N 02 is a light stabilized polyamide 6 for the production of bright textile and carpet fibers.

Ultramid® B33 01 is a polyamide 6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments.

Ultramid® B33 L 01 is a lubricated polyamide 6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments.

Ultramid® B33 LN 01 is a polyamide 6 grade of intermediate viscosity that is well suited for the production of cast film. Clarity and thermoformability are enhanced by the incorporation of nucleating and slip agent.

Ultramid® B36 01 is a polyamide 6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film and monofilaments.

Ultramid® B36 LN 01 is a polyamide 6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film. Clarity and thermoformability are enhanced by the incorporation of nucleating and slip agent.

Ultramid® B40 01 is a polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.

Ultramid® B40 L 01 is a lubricated polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.

Ultramid® B40 LN 01 is a polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film. Clarity and thermoformability are enhanced by the incorporation of nucleating and slip agent.

Ultramid® C33 L is a lubricated copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film. Ultramid® C33 L is well suited for the production of nonsymetric blown film with reduced curl. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

Ultramid® C33 LN is a copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

Ultramid® C33 is a copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film and monofilaments. Ultramid® C33 is well suited for the production of nonsymetric blown film with reduced curl. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

Ultramid® C40 L is a lubricated copolyamide 6/66 grade of high viscosity for the production of monofilaments and blown film. Ultramid® C40 L is well suit-ed for the production of high transparency, nonsymetric blown film with re-duced curl. Its very low melting point compared to standard PA 6 is advan-tageous for coextrusion with temperature sensitive polymers like EVOH.