FRPC202RX is a medium viscosity injection molding grade of polycarbonate-siloxane copolymer with good ductility and low temperature impact resistance. It consists of a non-halogenated FR system with a flame rating of V-0/1.1mm. Suitable for healthcare applications.

FRPC40RX is a medium viscosity injection molding grade of transparent polycarbonate with high impact resistance. It consists of a non-halogenated FR system with a flame rating of V-0/3mm. Suitable for healthcare applications.

FRPCA-20UV is a UV-stabilized medium flow injection molding grade of polycarbonate and acrylonitrile butadiene styrene (PC+ABS) alloy with high impact resistance. It consists of a non-halogenated FR system with flame rating of V-0 at 1.5 mm. Suitable for healthcare applications.

FRPCT1100RX is an injection molding grade of polycarbonate and polybutylene terephthalate (PC+PBT) alloy with improved impact and chemical resistance. It consists of a Brominated FR system with a flame rating of V-0/1.5mm and 5VA/2.5mm. Suitable for healthcare applications.

FRPCT60RX is a high flow injection molding grade of PBT+PC alloy with improved impact and chemical resistance. It consists of a Brominated FR system with a flame rating of V-0/1.5mm. FRPCT60RX is suitable for healthcare applications and is suitable for sterilization using EtO and steam at 121°C.

FRPCT80RX is a high flow injection molding grade of PC+PBT alloy with improved impact and chemical resistance. It consists of a Brominated FR system with a flame rating of V-0/1.5mm. Suitable for healthcare applications.

PA-2000RX is a medium flow injection molding grade of polycarbonate and acrylonitrile butadiene styrene (PC+ABS) alloy with high impact resistance. It consists of a non-halogenated FR system with UL flame rating of V-0 at 1.5 mm. Suitable for healthcare applications.

PC-1000RX is a medium flow injection molding grade of polycarbonate with good clarity and hydrolysis resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and limited gamma radiation.

PC-1300RX is a medium flow injection molding grade of polycarbonate with good clarity and hydrolysis resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and limited gamma radiation.

PC-1500RX is a medium flow injection molding grade of polycarbonate with good clarity and hydrolysis resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and limited gamma radiation.

PC-1600GSRX is a high flow injection molding grade of gamma stabilized polycarbonate with good clarity and high heat resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and gamma radiation. Demonstrates reduced color shift after multiple gamma radiation cycles as compared to non-stabilized PC.

PC-1600 RX is a high flow injection molding grade of polycarbonate with good clarity and heat resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and limited gamma radiation.

PC-2000RX is a high flow injection molding grade of polycarbonate with good clarity and hydrolysis resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and limited gamma radiation.

PC-2100GSRX is a high flow injection molding grade of gamma stabilized polycarbonate with good clarity and high impact resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and gamma radiation. Demonstrates reduced color shift after multiple gamma radiation cycles as compared to non-stabilized PC.

PC-2500RXR is a high flow injection molding grade of polycarbonate with good clarity and easy release. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and limited gamma radiation.

PC-4500GSRX is a low viscosity injection molding grade of gamma stabilized polycarbonate with UV and high heat resistance. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and gamma radiation. Demonstrates reduced color shift after multiple gamma radiation cycles as compared to non-stabilized PC.

PC-A2000RX is a high flow injection molding grade of polycarbonate with good clarity and hydrolysis resistance. It is biocompatibility tested according to ISO 10993-5 and USP Class VI compliant. PC-A2000RX is recommended for healthcare and medical device applications, and is suitable for sterilization using EtO, steam at 121°C, and limited gamma radiation.

PCABS-3000GSRX is a high flow injection molding grade of gamma stabilized polycarbonate and acrylonitrile butadiene styrene (PC+ABS) alloy with improved chemical resistance. It is suitable for healthcare applications.

PCABS-3000RX is a high flow injection molding grade of polycarbonate and acrylonitrile butadiene styrene (PC+ABS) alloy with improved chemical resistance. It is suitable for healthcare applications.

PCECO130RX is a high flow injection molding grade of polycarbonate with improved wear and friction. It consists of a non-halogenated FR system with UL flame rating of V-0 at 1.5 mm. Suitable for healthcare applications.

PCT-400URX is an unreinforced injection molding grade of PC+PBT alloy, impact modified, UV-stabilized, and chemical resistance. It is suitable for healthcare applications.