Prospector

聚碳酸酯（PC）: TES

Produkt Verfügbarkeit Produktbeschreibung
TES J-50/10 BK223 亚太地区  
TES J-50/10 GY8440 亚太地区  
TES J-50/10 亚太地区
Molding Parameters: 4 hours recommended for high tensile strength and smooth surface finish, or for vacuum metalizing. The dry temperature at 16 hours is 180°F. For 2-zone machines, the rear temperature is 600-650°F, and the front temperature is 580-620°F.
TES J-50/20 BK223 亚太地区  
TES J-50/20 GY8134 亚太地区  
TES J-50/20 NAT 亚太地区  
TES J-50/20/FR BK3585 亚太地区  
TES J-50/20/FR NAT 亚太地区  
TES J-50/20/RG BK223 亚太地区  
TES J-50/20/RG RD8664 亚太地区
09447
TES J-50/20/RG 亚太地区
Molding Parameters: 4 hours recommended for high tensile strength and smooth surface finish, or for vacuum metalizing. The dry temperature at 16 hours is 180°F. For 2-zone machines, the rear temperature is 600-650°F, and the front temperature is 580-620°F.
TES J-50/20/TF/10 BK 亚太地区  
TES J-50/20 亚太地区  
TES J-50/30 BK223 亚太地区  
TES J-50/30 NAT 亚太地区  
TES J-50/30/FR BK3585 亚太地区  
TES J-50/30/RG BK223 亚太地区  
TES J-50/30/RG 亚太地区
Molding Parameters: 4 hours recommended for high tensile strength and smooth surface finish, or for vacuum metalizing. The dry temperature at 16 hours is 180°F. For 2-zone machines, the rear temperature is 600-650°F, and the front temperature is 580-620°F.
TES J-50/30/TF/15 BK3585 亚太地区  
TES J-50/30/TF/15 GY8436 亚太地区  
TES J-50/30/TF/15 NAT 亚太地区  
TES J-50/30 亚太地区
Molding Parameters: 4 hours recommended for high tensile strength and smooth surface finish, or for vacuum metalizing. The dry temperature at 16 hours is 180°F. For 2-zone machines, the rear temperature is 600-650°F, and the front temperature is 580-620°F.
TES J-50/40 BK223 亚太地区  
TES J-50/40 WT8193 亚太地区  
TES J-50/40/ NAT 亚太地区  
TES J-50/40 亚太地区
Molding Parameters: 4 hours recommended for high tensile strength and smooth surface finish, or for vacuum metalizing. The dry temperature at 16 hours is 180°F. For 2-zone machines, the rear temperature is 600-650°F, and the front temperature is 580-620°F.
1
1