Polyethylen (PE): PE, Unspezifiziert
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
Casico™ FR6082 | Afrika und Mittlerer Osten |
Casico FR6082 is a thermoplastic, reduced fire hazard, zero halogen black jacketing compound combined with high mechanical strength, toughness and excellent extrusion properties. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Calcium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%.
Casico FR6082 contains 2,5% well dispersed furnace black of nominal particle size less than 25 nanometres in order to ensure excellent weathering resistance.
Applications
Casico FR6082 is designed for:
- Jacket for energy cables
The principle feature of this compound is the high physical strength and toughness. It can be used in areas sensitive to smoke or corrosive and toxic combustion products. For most cable constructions, Casico FR6082 has sufficient flame retardancy to satisfy single wire vertical burning tests.
Specifications
Casico FR6082 meets the applicable requirements below using sound commercial extrusion practice and testing procedures:
- ISO 1872-PE, KCGH, 33-D003
- ASTM D1248 Type II Class C, Cat 4
The following cable material standards are met by Casico FR6082:
- EN 50290-2-27
- EN 50363-8 TM7
- VDE 0207 Teil 24 (HM2, HM4 & HM5)
- BS 7655 LTS1-4
Cables manufactured with Casico FR6082 using sound extrusion practice normally comply with the following cable product standards:
- IEC 60502, Part 1, Type ST3, ST7
- IEC 60502, Part 2, Type ST3, ST7
- HD 620 S1, DMZ2
- HD 632 S1, ST3, ST7
- HD 603 S1 DMO 1
- HD 620 S2 DMZ 2-5
Special features
Casico FR6082 consists of specially selected components to offer:
- High mechanical strength and toughness
- Superb system ageing compatibility
- Low water permeability
- UV resistance
- Possibility for cable downsizing
- Processability on most PVC/PE extrusion equipment
- No need for pre-drying normally
- Excellent processing properties
|
CERTENE™ PE 30000 | Nordamerika | |
Clearflex™ SH 12 | Afrika und Mittlerer Osten |
Clearflex SH 12 is an innovative compound made by polyethylene and polymers having elastomeric properties suitable for multilayer blown film extrusion.
Thanks to its macromolecular structure, Clearflex SH 12 allows to obtain films that reach transverse deformations over 160% maintaining an optimal elastic memory, excellent puncture resistance and good transparency.
Application
Clearflex SH12 has been designed for the stretch hood production.
Clearflex SH 12 is used in the core layer of multilayer films, it can provide innovative and sustainable solutions for a wide range of applications including: beverage packaging, electrical appliances of all sizes, construction materials, bags of cement and fertilizers.
|
Delta PER-3G20 | Nordamerika | |
Delta PER-3G40 | Nordamerika | |
Delta PER-3G60 | Nordamerika | |
DENSETEC® Post Consumer | Asien Pazifik | |
DENSETEC® SHIELD | Asien Pazifik | |
Dow ENDURANCE™ HFDA-0100 BK | Nordamerika |
DOW HFDA-0100 BK is a specially formulated semiconductive, vulcanizable compound designed for conductor shield and bonded insulation shield applications in medium voltage crosslinked polyethylene insulated cables.(1) DOW HFDA-0100 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper and aluminum conductors.
Specifications:
DOW HFDA-0100 BK is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW HFDA-0100 BK, prepared using sound commercial fabrication practice, meets the following specifications:
- IEC 60502-02
- BS 7870-4.10
(1) DOW HFDA-0100 BK EXP3 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compounds. For other polymer insulation such as EPR and EPDM's, the user is cautioned to establish the utility of DOW HFDA-0100 BK with each formulation.
|
DOWLEX™ 2689G | Nordamerika |
DOWLEX™ 2689G Polyethylene Resin is an ethylene-octene copolymer produced via INSITE™ Technology from Dow.
Main Characteristics:
- HDPE with excellent stiffness and processibility
Complies with:
- U.S. FDA 21 CFR 177.1520 (c) 3.1a
- EU, No 10/2011
Consult the regulations for complete details.
|
DOWLEX™ GM 6047G | Lateinamerika |
DOWLEX GM 6047G Polyethylene Resin is a cast film polyethylene medium density resin designed to improve processing and performance for both breathable and non-breathable backsheet resins in hygiene applications.
Main Characteristics
- Linear Low Density Polyethylene
- Improved processability for cast film
- High modulus for downgauged applications
- Complies with U.S. FDA 21 CFR 177.1520(c) 3.2a
- Complies with European Commission EU No 10/2011
- Consult the regulations for complete details.
|
DOW™ Butene 1210G1 | Asien Pazifik |
- Used in Industrial, Food and Specialty Packaging
- Better optics and processability
- Good seal performance
- This resin contains slip and antiblock additives
- Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.
- Consult the regulations for complete details.
|
DOW™ Butene 1211G1 | Asien Pazifik |
- Used in Industrial, Food and Specialty Packaging
- Better optics and processability
- Good seal performance
- Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.
- Consult the regulations for complete details.
|
DOW™ Butene 1220G1 | Asien Pazifik |
- Used in Industrial, Food and Specialty Packaging
- Better optics and processability
- Good seal performance
- This resin contains slip and antiblock additives
- Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.
- Consult the regulations for complete details.
|
DOW™ Butene 1221G1 | Asien Pazifik |
- Used in Industrial, Food and Specialty Packaging
- Better optics and processability
Complies with:
- U.S. FDA 21 177.1520 (c) 3.2a.
- EU, No 10/2011
Consult the regulations for complete details.
|
DOW™ DGDA-5311 NT | Nordamerika |
DOW™ DGDA-5311 is a Polyethylene resin designed to cover the demanding geomembrane market that is manufactured by blown or Cast film extrusion. It has excellent mechanical properties, both in tensile and tear and resistance to cracking in an aggressive environment. Utilizing higher density MDPE gives DGDA-5311 NT low product permeability, providing an excellent barrier to water and other liquid media. Thanks to its density, the Dow resin facilitates the winding process during extrusion and the adaptation to the irregularities of the terrain during the installation of the geomembranes.
Principle Characteristics:
- Resin designed for geomembranes
- Excellent processability in high thickness
- Excellent ESCR and oxidation resistance
|
DOW™ Wire & Cable DFDK-6010 BK | Europa |
DOW™ Electrical & Telecommunications DFDK-6010 BK ist ein mit Kohlenstoffruß gefüllter Masterbatch, der einen Alterungsstabilisator enthält. Es ist speziell auf die Kompatibilität mit Polyethylenharzen von Dow für den Einsatz bei Ruß-Telekommunikations-, Netz- und Glasfaserkabeln ausgelegt. Um 2,6 % Kohlenstoffruß im Endprodukt zu erreichen, sollte DOW™ Electrical & Telecommunications DFDB-6010 BK ein Niveau von 6,2 % enthalten.
Mit dem empfohlenen Kohlenstoffrußgehalt bietet DOW™ Electrical & Telecommunications DFDK-6010 BK ausgezeichneten UV-Schutz und erfüllt die Dispergierungsanforderungen für Telekommunikations-, Netz- und Glasfaserkabel.
Verarbeitung:
DFDK-6010 BK Carbon Black Masterbatch und das gewählte Dow-Polyethylenharz sollten gleichmäßig und im richtigen Verhältnis in den Extruder-Schütter eingeführt werden, um einen konsistenten Gehalt von 2,6 % Kohlenstoffruß im Endprodukt sicherzustellen. Es sind die für das gewählte Grundharz geeigneten Schmelzextrusionstemperaturen zu wählen.
|
DynaMix™ 430-S | Europa |
Masterbatch containing 30% of vegetable based Stearamide dispersed in a polyethylene resin. DynaMix 430-S was designed for use in polyethylene and compatible systems. Other loading levels are available upon request.
Features:
- Increased Hydrophobicity
- Improved Processability
- Lower Surface COF
- Greater Mar and Abrasion Resistance
- Increased Softness
Applications
- Films
- Woven and Non-Woven Fibers
- Injection Molded Parts
|
DynaPath™ 267NL | Europa |
Conductive PE
Features:
- Conductive
- Good Dimensional Stability
- Excellent Processability
Applications:
- Aerospace
- Industrial
- Electrical/Electronic Applications
|
DynaPath™ 435XLPE | Europa |
Conductive Crosslinked PE
Features:
- Conductive
- Excellent Chemical Resistance
- Low Temperature Properties
- Halogen Free
- Crosslinkable
- Good Processability
Applications:
- Automotive
- Industrial
- Wire and Cable Applications
|
DynaStat® 247 | Europa |
Antistatic Polyethylene Compound
Features:
- Low Warpage
- Good Dimensional Stability
- Excellent Processability
Applications:
- Automotive
- Industrial
- Electrical/Electronic Applications
|
DynaStat® 257 | Europa |
Antistatic Polyethylene Compound
Features:
- Low Warpage
- Good Dimensional Stability
- Excellent Processability
Applications:
- Automotive
- Industrial
- Electrical/Electronic Applications
|
DynaStat® 257M2 | Europa |
Antistatic Polyethylene Compound
Features:
- Low Warpage
- Good Dimensional Stability
- Excellent Processability
Applications:
- Automotive
- Industrial
- Electrical/Electronic Applications
|
DynaStat® 457 | Europa |
Antistatic Polyethylene Compound
Features:
- Permanently Antistatic
- Good Dimensional Stability
- Excellent Processability
Applications:
- Packaging
- Industrial
- Electrical/Electronic Applications
|
EcoForte® FR PE 40 01 | Europa |
Halogen free flame retardant PE
ATH based
|
EcoForte® FR PE 40 02 | Europa |
Halogen free flame retardant PE
MDH based
|
EcoForte® PF PE 25 01 | Europa |
Peel compound PE
|
ECOmpoundS® KR7121 | Europa | |
EEC LLD 3505 U | Afrika und Mittlerer Osten | |
EEC MD 3804 U | Afrika und Mittlerer Osten | |
EEC MD 3904 U | Afrika und Mittlerer Osten | |
Egyeuroptene RG10 PE | Afrika und Mittlerer Osten |
Egyeuroptene RG10 PE is a Polyethylene colored powder, designed for Rotational molded items: General rotomoulding applications.
|
ELTEX® TUB220-RT | Europa |
Eltex® TUB220-RT is a natural polyethylene resin meeting Type II PE-RT (Polyethylene of Raised Temperature Resistance) requirements according to EN ISO 24033.
Eltex® TUB220-RT provides a step-out performance with a unique combination of properties between mechanical performance at elevated temperature, pipe flexibility and superior processing behaviour.
This PE-RT type II material is well suited for both monolayer and multilayer plastic or metal composite pipes
Applications
- Underfloor and wall heating & cooling
- Industrial pipes and fittings
|
Favorite A100 | Nordamerika | |
Favorite A101 | Nordamerika | |
Favorite A170 | Nordamerika | |
Favorite A180 | Nordamerika | |
Favorite A190 | Nordamerika | |
Favorite A401 | Nordamerika | |
Favorite MDLLN | Nordamerika |