SABIC® LDPE 2200H0 is a grade with a low melt flow range and contains no additives. This grade has a good draw down ability and very good optical properties. Application SABIC® LDPE 2200H0 is typically used for thin film applications combining high strength and good optical properties. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2200H2 is a grade with a low melt flow rate and contains a low level of anti block and a medium level of slip agent. This grade shows a good draw down ability and good optical properties. Application SABIC® LDPE 2200H2 is typically used for thin film applications requiring high strength and thin shrink film with high shrink forces and wrapping strength. Typical applications are lamination and coextruded films. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2201H0 is a grade without additives with a very good draw down ability. Films based on 2201H0 combine toughness with high tear strength and very good optical properties. Application SABIC® LDPE 2201H0 is typically used for thin packaging film purposes, where good optical properties are required. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2201H0W is a grade without additives with a very good draw down ability. Films based on 2201H0W combine toughness with high tear strength and very good optical properties. Application SABIC® LDPE 2201H0W is typically used for thin packaging film purposes, where good optical properties are required. SABIC® LDPE 2201H0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2201H1 is a grade with a low level of anti block and a medium level of slip agent. The grade has a very good draw down ability. Films based on 2201H1 combine toughness with high tear strength, good optical properties and low CoF. Application SABIC® LDPE 2201H1 is typically developed for lamination films, high quality carrier bags and high quality packaging films. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2201H1W is a grade with a low level of anti block and a medium level of slip agent. The grade has a very good draw down ability. Films based on 2201H1W combine toughness with high tear strength, good optical properties and low CoF. Application SABIC® LDPE 2201H1W is typically used for lamination films, high quality carrier bags and high quality packaging films. SABIC® LDPE 2201H1W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2201H3W is a grade anti block and slip agent. The grade has very good draw down ability. Films based on 2201H3W combine toughness with high tear strength, good optical properties and low CoF. Application SABIC® LDPE 2201H3W is typically used for thin packaging film purposes, where good optical properties are required. SABIC® LDPE 2201H3W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2201S4 is a grade with a high amount of anti block and a low amount of slip agent. The grade contains anti oxidant. The grade shows good optical properties. Application SABIC® LDPE 2201S4 is typically used for applications where stabilisation is required during extrusion, storage and usage. Films from this grade show low reblocking values. Film properties Film properties have been measured at film of 50 µm with a BUR = 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2202H3W is a blown film extrusion grade with a high level of anti block and slip agent. This grade offers good optical properties and a very good draw down ability. Application SABIC® LDPE 2202H3W is typically used for packaging films for food and industrial goods and for lamination films. This grade is typically used when high draw down is required. SABIC® LDPE 2202H3W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 25 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2202U0 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2202U0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2308N0 is a LDPE tubular grade without additives. SABIC® LDPE 2308N0 is produced using SABIC Clean Tubular Reactor (CTR) Technology. Application SABIC® LDPE 2308N0 is typically used as carrier resin for masterbatch and compounding applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2402CX0 is a grade typically used in foam applications. Application SABIC® LDPE 2402CX0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2402H0 is a blown film grade which has a very broad processing window and an excellent draw down ability. The films are characterized by very good mechanical and optical properties. The grade contains no additives. Application SABIC® LDPE 2402H0 is typically used for thin film applications where enhanced stiffness is required, such as thin shrink films, food packaging films, bags and pouches. Film properties Film properties have been measured at film of 25 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2402H3W is a high gloss, general purpose grade with a high level of anti block and slip agent. This grade offers good optical properties and a very good draw down ability. Application SABIC® LDPE 2402H3W is typically used for thin high gloss films used for automatic packaging purposes. Due to very low migration levels, SABIC® LDPE 2402H3W can also be used for food applications. Film properties Film properties have been measured at film of 25 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2404EC is a tubular LDPE grade for extrusion coating. Its special molecular structure gives a good combination of processing and end-performance properties. SABIC® LDPE 2404EC can be used on low and (very) high line speed extrusion coating and lamination processes. Due to its excellent draw down performance and good adhesion, very thin coating layers can be applied on the substrate. Application SABIC® LDPE2404EC is typically used in extrusion coating and lamination applications, such as liquid packaging, imaging, food packaging, release liners and building & construction. It can be used for coatng on paper board, aluminium foil and other substrates. Due its relative high density (compared to SABIC LDPE 2005EC) it has a higher temperature resistance. Properties Mechanical properties determined on compression moulded specimen (2 mm thick) at test speed of 50 mm/min. Film properties have been measured at film of 25 µm, produced on lab scale equipment. Water vapour permeability at 38 °C and 90 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2404H4 is a grade with a high level of anti block and slip agent. The grade has a very good draw down ability. Typically films produced from this grade are stiff, have very good optical properties, low CoF and no blocking. Application SABIC® LDPE 2404H4 is typically used for stiffer thin films for textile packaging. Film properties Film properties have been measured at film of 25 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2404N0 is a LDPE tubular grade without additives.The product is typically developed for cast film extrusion applications requiring an optimal relationship between draw down, purity and organoleptic properties. Application SABIC® LDPE 2404N0 can be used for a wide variety of cast film applications. Properties Mechanical properties have been determined on compression moulded test specimen (1,1 mm thick and 5,0 mm wide) at 50 mm/min. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2500N0 is a grade without additives with very good shrink properties, stiffness and good bundle force. The grade has a good draw down ability. Application SABIC® LDPE 2500N0 is typically used for application in shrinkhoods, industrial sacks, heavy duty bags and liners. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2501N0 is a grade without additives with a low gel level, which combines good draw down ability with fair optical properties and stiffness. Application SABIC® LDPE 2501N0 is typically used in diaper film, surface protection film, lamination film and in applications where low blocking behavior is required and the presence of slip and anti block is unwanted. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2501N0W is a grade without additives with a low gel level, which combines good draw down ability with fair optical properties and stiffness. Application SABIC® LDPE 2501N0W is typically used in diaper film, surface protection film, lamination film and in applications where low blocking behavior is required and the presence of slip and anti block is unwanted. SABIC® LDPE 2501N0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2600H0 is a grade with a low MFR and increased density. The material contains no additives. The films are characterized by very good mechanical properties. Application SABIC® LDPE 2600H0 is, due to its good thin film processability, typically used for technical applications like shrink film for mineral water packaging. Film properties Film properties have been measured at film of 50 µm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2601X1 is typically used in foam applications. This grade contains anti block and slip agents. Application SABIC® LDPE 2601X1 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2602H0W is a grade with very good optical properties. The grade contains no additives, has an increased density and shows a good draw down ability. The films are characterized by good mechanical properties. Application SABIC® LDPE 2602H0W is typically used for applications where enhanced stiffness is required. SABIC® LDPE 2602H0W can typically be used for food applications due to very low migration levels. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2602X1 is typically used in foam applications. This grade contains anti block and slip agents. Application SABIC® LDPE 2602X1 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2801H0W offers high production output with very good optical properties, as well as good stiffness toughness balance. Application SABIC® LDPE 2801H0W is typically used for high clarity collation shrink films, glossy automatic packaging printed films and deep freeze films. SABIC® LDPE 2801H0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at 30 µm film with a BUR of 3. This product is not intended for and must not be used in any pharmaceutical/medical applications.

7019EC is a Low Density Polyethylene resin produced using Autoclave technology. 7019EC is designed for high speed extrusion coating application. 7019EC contains no additives such as slip agent or anti-blocking agents.

LDPE HP0321NN Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 230C. LDPE HP0321NN resin, when properly fabricated, shows a good combination of processability, stiffness and physical properties. LDPE HP0321NN has very low gel levels

HP0322N is a Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip and antiblock additives. It gives outstanding toughness and optical properties in the film.

HP0322NN is a Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip, antiblock and antioxidant additives. It gives outstanding toughness and optical properties in the film.

HP0323NN is a Low Density Polyethylene grade suitable for producing heavy-duty films. It gives outstanding toughness and optical properties in the film. It contains no slip, no antiblock and no antioxidant additives.

SABIC® LDPE HP0722NDF is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for foaming processes using both physical and chemical blowing agents.

HP0722NN is an additive free low density polyethylene grade suitable for producing medium duty films. It gives good toughness and optical properties in the film.

HP0723JN is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. HP0723JN has been specially designed for superior processability on blown films lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. HP0723JN Contains Slip and antiblock additives. LDPE HP073JN has low gel levels. ?Excellent processability and draw down ?Good physical properties in blends with LLDPE ?Can be readily extruded using conventional blown films techniques at melt temperatures between 160 and 195°C

HP0724NN is a fractional melt index low density polyethylene resin, containing no slip nor antiblock additives. HP0724NN has been specially designed for superior processability on blown films lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. HP0724NN Does not Contain Slip or antiblock additives. ?Excellent processability and draw down ?Good physical properties in blends with LLDPE ?Can be readily extruded using conventional blown films techniques at melt temperatures between 160 and 195°C

HP0823JN is a Low Density Polyethylene grade formulated with slip and antiblock additives. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties

HP0823NN is a Low Density Polyethylene grade formulated with no slip and no antiblock and no antioxidant additives. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties

SABIC® LDPE HP0824NDF is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents.

SABIC® HP0830N is Low Density Polyethylene grade of medium density with improved stiffness and excellent optical properties. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties.

HP20023 is an additive free low density polyethylene grade with high melt flow, offering good processability and capability to accept high pigment loading during compounding.

HP2022JN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2022JN contains slip and antiblock additives.