- High Density Polyethylene (HDPE) - Complies with: -- U.S. FDA 21 CFR 177.1520 (c) 3.2a -- Canadian HPFB No Objection -- EU, No 10/2011 -- Consult the regulations for complete details. DOW DGDC-2100 NT 7 High Density Polyethylene Resin is a high-molecular weight, high-density film grade resin. This product was specifically designed to offer an optimal balance of physical properties and processability. DGDC-2100 NT7 HDPE resin is ideally suited for use in making grocery sacks, consumer and institutional liners, and merchandise bags.

Dow HDPE DMDA-8007 HEALTH+™ is a narrow molecular weight distribution high density homopolymer designed to offer excellent stiffness, low warpage, good toughness, and good moldability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care as well as caps and closures for pharmaceutical packaging. Main Characteristics: - Excellent stiffness - Low warpage - Good toughness - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520 (c) 2.2 - EU, No 10/2011 - Canadian HPFB, No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

- Excellent stiffness/modulus - Excellent warp resistance - Molded parts have high gloss, low odor - For injection molded crates, cases, totes, and other parts needing high modulus - Complies with U.S. FDA 21 CFR 177.1520 (c)2.2 - Complies with Canadian HPFB No Objection - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DMDA-8007 NT 7 High Density Polyethylene (HDPE) Resin is a narrow molecular weight distribution high density homopolymer designed to offer excellent stiffness, low warpage, good/acceptable toughness, and good moldability. This resin is ideally suited for injection molded crates, cases, trays, tote bins, and other objects requiring high rigidity. This resin is also suitable for cast film extrusion processing.

- For Extrusion Coating Applications - Complies with U.S. FDA 21 CFR 177.1520 (c) - Europe Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details

Dow HDPE DMDA-8904 HEALTH+™ is a narrow molecular weight distribution high density copolymer designed to offer excellent stiffness, environmental stress crack resistance, and good moldability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care. Films can also be cast from this product yielding good barrier and stiffness. Main Characteristics: - Excellent stiffness - Excellent stress crack resistance - Good processability - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520 (c) 3.2a - EU, No 10/2011 - Canadian HPFB No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

- Injection molding - For injection molded pails, industrial parts and other shipping containers - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details. DOW DMDA-8904 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. This resin is also suitable for cast film extrusion processing.

Dow HDPE DMDA-8907 HEALTH+™ is produced via UNIPOL™ Process Technology from Dow and is intended for use in injection molded medical device applications. This resin has been designed to provide excellent processability to molders and to meet the requirements of devices requiring impact strength and environmental stress crack resistance. Main Characteristics: - Good environmental crack resistance - Excellent toughness - Gamma stable - Low extractables Complies with: - U.S. FDA 21CFR 177.1520 (c) 3.2a - EU, No 10/2011 - Canadian HPFB, No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

DOW DMDA-8907 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. - Injection molding - For injection molded pails, industrial parts and other shipping containers - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - Canadian HPFB No Objection - EU, No 10/2011 - U.S. USP - U.S. FDA DMF Consult the regulations for complete details.

DOW™ DMDA-8910 NT 7 High Density Polyethylene (HDPE) Resin is produced by the UNIPOL™ Process Technology from Dow and is intended for use in injection molded rigid packaging applications including material handling and industrial container applications. The resin is designed to meet rigorous performance characteristics, including environmental stress crack resistance and impact strength, while maintaining excellent processing characteristics beneficial for molders. Main Characteristics: - Injection or Compression Molding - Designed for caps and closures - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution - Excellent Organoleptic properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection Consult the regulations for complete details.

DOW HDPE DMDA-8920 HEALTH+™ Resin is a narrow molecular weight distribution high density copolymer designed to offer an excellent balance of toughness, environmental stress cracking resistance, and processability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care. This product can also be used in pharmaceutical packaging including caps and closures. Main Characteristics: - Excellent toughness - Excellent stress crack resistance - Good processability - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520(c)3.1a - USP XXIII Class VI - EU, No 10/2011 - Canadian HPFB - No Objection - Drug Master File Listing Consult the regulations for complete details.

- Injection molding - For injection molded housewares, toys, food containers and pails - Excellent balance of toughness, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.2a - Complies with U.S. FDA - DMF - Complies with Canadian HPFB No Objection - Complies EU, No 10/2011 - Consult the regulations for complete details. DOW DMDA-8920 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as housewares, toys, food containers and pails. This resin has been designed to provide an excellent balance of toughness, environmental stress crack resistance and processability.

Overview: - Injection molding - Narrow molecular weight distribution - Excellent balance of toughness, and stress crack resistance - Complies with U.S. FDA21 CFR 177.1520 ( c )3.2a - Canadian HPFB No Objection - Consult the regulations for complete details. DOW™ DMDA-8933 NT 7 High Density Polyethylene (HDPE) is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as injection molded containers and thin-walled pails. The product is specifically designed to provide excellent processing in all injection molding equipment.

Dow HDPE DMDA-8940 HEALTH+™ Resin is a narrow molecular weight distribution high density copolymer designed to offer an excellent balance of toughness, environmental stress crack resistance, and processability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care. This product can also be used in pharmaceutical packaging including caps and closures. Main Characteristics: - Excellent toughness - Excellent stress crack resistance - Good processability - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520 (c) 3.2a - EU, No 10/2011 - Canadian HPFB No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

- Injection molding - For injection molded housewares, toys, food containers and pails - Excellent balance of toughness, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.2a - Complies with U.S. FDA -DMF - Complies with Canadian HPFB No Objection - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DMDA-8940 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as housewares, toys, food containers and pails. This resin has been designed to provide an excellent balance of toughness, environmental stress crack resistance and processability.

DOW™ DMDA-8950 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thin-wall injection molding applications such as food containers, including freezer applications. This resin has been designed to provide a good impact/stiffness balance as well as excellent processability. Main Characteristics - Injection molding - For injection molded thin-wall food containers, including freezer applications - High flow for processing ease - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a - Canadian HPFB No Objection Consult the regulations for complete details.

- Injection molding - For injection molded thin-wall food containers - Excellent processability - Good impact strength and rigidity - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with U.S. FDA DMF - Complies with U.S. FDA 21 CFR 177.1520(c)3.2a - Consult the regulations for complete details. DOW DMDA-8965 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thinwall injection molding applications such as food containers. This resin has been designed to provide good toughness and excellent processability.

- Injection molding - Roll-out trash carts and other large parts - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - Canadian HPFB No Objection - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details. DOW DMDB-7950 NT 7 High Density Polyethylene (HDPE) Resin is intended for use in injection molding applications such as roll-out trash carts and other large parts with short molding cycles. It is produced via UNIPOL™ Process Technology from Dow and has been designed to meet the rigorous performance characteristics of impact resistance, environmental stress crack resistance, stiffness, and low warpage, while maintaining excellent moldability.

DOW™ DMDC-1210 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water bottles, where minimizing the contribution of the package to the taste of the product is a requirement. Main Characteristics: - Excellent Stiffness and Impact Strength - Excellent Organoleptic Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a. - Canadian HPFB No Objection - EU, No 10/2011 - Consult the regulations for complete details

DOW™ DMDD-1210 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water, juice, dairy, and sports drinks, including hot fill and aseptic bottling applications, where minimizing the contribution of the package to the taste of the product and use of slip is a requirement. Main Characteristics: - Excellent Stiffness and Impact Strength - Excellent Organoleptic Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a. - EU, No 10/2011 - Consult the regulations for complete details - Additives: 1500 ppm Slip

Dow DPDA-3220 NT 7 High Density Polyethylene Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: Dow DPDA-3220 NT 7 High Density Polyethylene Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For Large Agricultural Tanks, Intermediate Bulk Containers, Potable Water, Chemical Tanks and Industrial Products - Excellent impact strength, stress crack resistance and processability Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

HDPE KS 10100 UE Polyethylene Resin ist ein Polyethylenharz hoher Dichte, das darauf ausgelegt ist, eine verbesserte Verarbeitbarkeit, ausgezeichnete Schlagfestigkeit, Spannungsrissbeständigkeit und UV-Stabilität für Anwendungen im Freien und minimale Verwerfung aufzuweisen. Hinweis: HDPE KS 10100 UE Polyethylene Resin sollte bei unmodifizierter Verwendung und Herstellung unter Einhaltung der bevorzugten Herstellungspraktiken für Anwendungen mit Lebensmittelkontakt die FDA-Richtlinie 177.1520 und die meisten Europäischen Lebensmittelkontaktgesetze einhalten. Wenden Sie sich an Ihr nächstgelegenes Büro in Bezug auf die Erklärungen zur Erfüllung der Vorschriften hinsichtlich des Lebensmittelkontakts. Der Käufer ist verantwortlich für die Festlegung, ob der Einsatz die relevanten Vorschriften erfüllt. Anwendungen: - Abfallbehälter - Große Behälter - Stabile Teile

HDPE KT 10000 UE Polyethylene Resin ist ein UV-stabilisiertes Harz mit sehr schmaler Molmassenverteilung. Es wurde auf eine ausgezeichnete Steifigkeit kombiniert mit guter Schlagfestigkeit für spritzgegossene Teile bei minimaler Verwerfung ausgelegt. Hinweis: HDPE KT 10000 UE Polyethylene Resin sollte bei unmodifizierter Verwendung und Herstellung unter Einhaltung der bevorzugten Herstellungspraktiken für Anwendungen mit Lebensmittelkontakt die FDA-Richtlinie 177.1520 und die meisten Europäischen Lebensmittelkontaktgesetze einhalten. Wenden Sie sich an Ihr nächstgelegenes Büro in Bezug auf die Erklärungen zur Erfüllung der Vorschriften hinsichtlich des Lebensmittelkontakts. Der Käufer ist verantwortlich für die Festlegung, ob der Einsatz die relevanten Vorschriften erfüllt. Anwendungen: - Gehäuse und Boxen für Industrieteile - Kisten für Naturprodukte und Getränke - Eimer

HDPE LP 8000 HD is a High Density Polyethylene Resin specially designed to produce large blow molded parts. This resin offers good processability and excellent parison melt strength, which contributes to uniform wall thickness in large parts. Containers molded with this resin exhibit excellent environmental stress cracking resistance (ESCR), Impact Resistance and Top Load (stackability). Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12. Consult the regulations for complete details.

HDPE LP 8000 is a High Density Polyethylene Resin specially designed to produce large blow molded parts. This resin offers good processability and excellent parison melt strength, which contributes to uniform wall thickness in large parts. Containers molded with this resin exhibit excellent environmental stress cracking resistance (ESCR), Impact Resistance and Top Load (stackability). Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12.

HDPE NG 7005 is a High Density Polyethylene Resin designed for thin gauge films. This resin offers high melt strength and bubble stability along with good mechanical properties. Main Characteristics: - Complies with Regulation U.S. FDA 21 CFR 177.1520(c)3.2a - Complies with European Commission Regulation (EU) No 10/2011 - Consult the regulation for complete details

Erfüllung der Industriestandards: - ASTM D 3350: Zellklassifikation PE335440A DOW TCP-2495 NT High Density Polyethylene Resin wird mittels UNIPOL™-Prozesstechnologie hergestellt. Es ist insbesondere auf den Einsatz in allen Leitungs- und Kabelkanalanwendungen in der Telekommunikation und für Netzkabel ausgelegt. Das naturfarbene Harz kann in Kombination mit Farbkonzentrat mittels jeder beliebigen Extrusionsmethode für Leitungs- oder Kabelkanäle in allen Größen in großen Stückzahlen fertig kombiniert werden.

XDMDA-1206 NT 7 Experimental High Density Polyethylene (HDPE) Resin from Dow is intended for use in injection molding applications such as caps and closures and other injection molding applications. This resin has been designed to meet demanding performance requirements such as environmental stress crack resistance, stiffness, impact strength, while maintaining good processing characteristics. - Excellent impact strength, stiffness and stress crack resistance - Excellent processability Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.

DOW™ XDMDA-1227 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent Stiffness and Impact Strength - Excellent Organoleptic Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a. - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE™ 132G Low Density Polyethylene Resin kann mittels konventioneller Blasfolientechnik bei Schmelztemperaturen zwischen 170 und 230°C extrudiert werden. Dieses Harz weist bei ordnungsgemäßer Herstellung eine ausgezeichnete Kombination aus Verarbeitbarkeit, Steifigkeit und physikalischen Eigenschaften auf. Dieses Harz beinhaltet keine Gleit- und -Antiblock-Zusätze. Hinweis: Erfüllt: U.S. FDA 21 CFR 177.1520(c)2.2 EU, No 10/2011 Vollständige Einzelheiten finden Sie in den Bestimmungen. Anwendungen: - Industriefolie hoher Belastung - Schrumpffolie

- A barefoot resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used in shrink film, shipping sacks, construction film and other gauge film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Consult the regulations for complete details.

- A medium anti-block resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used for thick gauge film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2. - Canadian HPFB No Objections (With Limitations) - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE™ 150E Low Density Polyethylene Resin kann mittels konventioneller Blasfolientechnik bei Schmelztemperaturen zwischen 170 und 230°C extrudiert werden. DOW LDPE 150E Low Density Polyethylene Resin weist bei ordnungsgemäßer Herstellung eine gute Kombination aus Verarbeitbarkeit, Steifigkeit und physikalischen Eigenschaften auf. Hinweis: DOW LDPE 150E Low Density Polyethylene Resin sollte erfüllen: EU, No 10/2011 U.S. FDA 21 CFR 177.1520(c)2.2 U.S. FDA-DMF Vollständige Einzelheiten finden Sie in den Bestimmungen. Anwendungen: - Industriefolie hoher Belastung