Pharmalene ML 70 PH BCA is intended for the use within pharmaceutical sector and is characterized by high impact and creep resistance as well as a good ESCR. Pharmalene ML 70 PH BCA is suitable for the production of caps & closures. Sustainability The product Pharmalene ML 70 PH BCA 'Bio circular attributed' is a highly sustainable medical grade HDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene ML 70 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene ML 70 PH BCA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in confomity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The prodcution of Pharmalene ML 70 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene ML 70 PH BCA will be bio attributed for 95%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene ML 70 PH is a high density polyethylene (HDPE, C6-comonomers) with antioxidants, obtained by gas phase technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene ML 70 PH is intended for the use within pharmaceutical sector and is characterized by high impact and creep resistance as well as a good ESCR. Pharmalene ML 70 PH is suitable for the production of caps & closures.

Pharmalene MP 20 PH BA is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH BA is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 20 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 20 PH BA is a medium fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and extrusion coating. The production of Pharmalene MP 20 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 20 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH BCA is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MP 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 20 PH BCA is a medium fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extursion, extrusion and extrusion blown moulding. The production of Pharmalene MP 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 20 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 20 PH is a medium fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and extrusion coating. Main Application Pharmalene MP 20 PH is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures.

Pharmalene MP 30 PH BA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH BA is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 30 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 30 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 30 PH BA is a medium fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 30 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 30 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 30 PH BCA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH BCA is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MP 30 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 30 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 30 PH BCA is a medium fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 30 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 30 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 30 PH is a medium fluidity homopolymer low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 30 PH is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

Pharmalene MP 31 PH BA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH BA is suitable for the production of syringes and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 31 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 31 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 31 PH BA is a medium fluidity low density polyethylene (LDPE) addivated with slip agent and anti-block obtained by high pressure autoclave process.. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 31 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 31 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 31 PH BCA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH BCA is suitable for the production of syringes and caps & closures. Sustainability The product Pharmalene MP 31 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 31 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 31 PH BCA is a medium fluidity low density polyethylene (LDPE) additivated with slip agent and anti-block obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 31 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 31 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 31 PH is a medium fluidity low density polyethylene resin (LDPE) additivated with slip agent and anti-block obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 31 PH is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH is suitable for the production of syringes and caps & closures.

Pharmalene MP 90 PH BA is intended for the use within pharmaceutical sector and is characterized by an excellent balance between processability and mechanical properties as well as creep resistance. Pharmalene MP 90 PH BA is suitable for the production of caps & closures. Sustainability The "bio attributed" product Pharmalene MP 90 PH BA is highly sustainable medical grade HDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 90 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 90 PH BA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The production of Pharmalene MP 90 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sourses (e.g. vegetable oils). Pharmalene MP 90 PH BA will be bio attributed for 95%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 90 PH BCA is intended for the use within pharmaceutical sector and is characterized by an excellent balance between processability and mechanical properties as well as creep resistance. Pharmalene MP 90 PH BCA is suitable for the production of caps & closures. Sustainability The product Pharmalene MP 90 PH BCA 'Bio circular attributed' is a highly sustainable medical grade HDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 90 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 90 PH BCA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in confomity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The prodcution of Pharmalene MP 90 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 90 PH BCA will be bio attributed for 95%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 90 PH is a homopolymer high density polyethylene (HDPE) with antioxidants produced by gas phase process. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 90 PH is intended for the use within pharmaceutical sector and is characterized by an excellent balance between processability and mechanical properties as well as creep resistance. Pharmalene MP 90 PH is suitable for the production of caps & closures.

Pharmalene MR 10 PH BA is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MR 10 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 10 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 10 PH BA is a high fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MR 10 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MR 10 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MR 10 PH BCA is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MR 10 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 10 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 10 PH BCA is a high fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MR 10 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MR 10 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MR 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. Main Application Pharmalene MR 10 PH is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

Pharmalene MR 50 PH BA is intended for the use within pharmaceutical sector and is characterized by a high rigidity. Pharmalene MR 50 PH BA is suitable for the production thin walled pharmaceutical containers as well as closures. Sustainability The "bio attributed" product Pharmalene MR 50 PH BA is highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 50 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 50 PH BA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacuring practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MR 50 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sources (e.g vegetable oils). Pharmalene MR 50 PH BA will be bio attributed for 90%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MR 50 PH BCA is intended for the use within pharmaceutical sector and is characterized by a high rigidity. Pharmalene MR 50 PH BCA is suitable for the production thin walled pharmaceutical containers as well as closures. Sustainability The product Pharmalene MR 50 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized method that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 50 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 50 PH BCA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is producedin conformity to the good manufacturing practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MR 50 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MR 50 PH BCA will be bio circular attributed for 90%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon the delivery of the product.

Pharmalene MR 50 PH is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MR 50 PH is intended for the use within pharmaceutical sector and is characterized by a high rigidity. Pharmalene MR 50 PH is suitable for the production thin walled pharmaceutical containers as well as closures.

Pharmalene MS 20 PH BA is intended for the use within pharmaceutical sector and is characterized by excellent low temperature properties and by a good flowability. Pharmalene MS 20 PH BA is suitable for the production of pharmaceutical containers, closures and pharmaceutical masterbatches. Sustainability The "bio attributed" product Pharmalene MS 20 PH BA is highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 20 PH BA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacuring practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 20 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sources (e.g vegetable oils). Pharmalene MS 20 PH BA will be bio attributed for 90%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MS 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by excellent low temperature properties and by a good flowability. Pharmalene MS 20 PH BCA is suitable for the production of pharmaceutical containers, closures and pharmaceutical masterbatches. Sustainability The product Pharmalene MS 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized method that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 20 PH BCA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is producedin conformity to the good manufacturing practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MS 20 PH BCA will be bio circular attributed for 90%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon the delivery of the product.

Pharmalene MS 20 PH is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MS 20 PH is intended for the use within pharmaceutical sector and is characterized by excellent low temperature properties and by a good flowability. Pharmalene MS 20 PH is suitable for the production of pharmaceutical containers, closures and pharmaceutical masterbatches.

Pharmalene MS 40 PH BA is intended for the use within pharmaceutical sector and is characterized by good impact resistance and rigidity. Pharmalene MS 40 PH BA is suitable for the production pharmaceutical containers, large - sized injection moulded articles as well as pharmaceutical masterbatches. Sustainability The "bio attributed" product Pharmalene MS 40 PH BA is highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 40 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 40 PH BA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacuring practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 40 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sources (e.g vegetable oils). Pharmalene MS 40 PH BA will be bio attributed for 90%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MS 40 PH BCA is intended for the use within pharmaceutical sector and is characterized by good impact resistance and rigidity. Pharmalene MS 40 PH BCA is suitable for the production pharmaceutical containers, large - sized injection moulded articles as well as pharmaceutical masterbatches. Sustainability The product Pharmalene MS 40 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized method that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 40 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 40 PH BCA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is producedin conformity to the good manufacturing practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 40 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MS 40 PH BCA will be bio circular attributed for 90%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon the delivery of the product.

Pharmalene MS 40 PH is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MS 40 PH is intended for the use within pharmaceutical sector and is characterized by good impact resistance and rigidity. Pharmalene MS 40 PH is suitable for the production pharmaceutical containers, large - sized injection moulded articles as well as pharmaceutical masterbatches.

Pharmalene MT 10 PH BA is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MT 10 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MT 10 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MT 10 PH BA is a high fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MT 10 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MT 10 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MT 10 PH BCA is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MT 10 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MT 10 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MT 10 PH BCA is a high fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MT 10 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MT 10 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MT 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. Main Application Pharmalene MT 10 PH is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

VERSALIS REVIVE® PE 100 LF S is a LLDPE/LDPE polyethylene for blown-film and extrusion containing 100% of post-consumer plastic from municipal waste separate collection selected for neutral color, allowing its use in high content technological applications. Main Applications VERSALIS REVIVE® PE 100 LF S is suitable for the production of films for secondary or tertiary industrial packaging, where neutral color is particularly required (eg shrink film, hoods, industrial bags...). It is preferably to be used in coextrusion, in one or more internal layers and in a mixture with virgin polyethylene. The percentages of use (up to 100%) and the thicknesses must be evaluated according to the final characteristics of the application. VERSALIS REVIVE® PE 100 LF S is not suitable for the production of articles and materials intended for direct contact with food, the manufacture of toys or items for early childhood and in pharmaceutical, cosmetic and / or medical applications.

VERSALIS REVIVE® PE COM75LF1 H is an LLDPE/LDPE-based polyolefin compound containing 75% of post-consumer plastic from trade and industry supply chain, effectively optimized with appropriate polymer bases making it suitable for blown film technology for the production of high quality films. Main Applications The specific composition of VERSALIS REVIVE® PE COM75LF1 H optimizes its processability and gives the products a favorable balance between processability and mechanical properties, making it suitable for the production of films intended for various uses in secondary or tertiary packaging (e.g. shrink films, bags, hoods, silage films). VERSALIS REVIVE® PE COM75LF1 H is not suitable for the production of articles and materials intended for direct contact with food, the manufacture of toys or items for early childhood and in pharmaceutical, cosmetic and / or medical applications.

VERSALIS REVIVE® PE 100 HD - Series Forever is a HDPE-based polyethylene for blow moulding, containing 100% post-consumer plastic from municipal waste separate collection, allowing its use in high-tech applications. Main Applications VERSALIS REVIVE® PE 100 HD - Series Forever is indicated for the production of industrial containers of various types, pipes and various profiles. Use in coextrusion is recommended, in one or more internal layers and in a mixture with virgin polyethylene. VERSALIS REVIVE® PE 100 HD - Series Forever is not suitable for the production of articles and materials intended for direct food contact, the manufacture of toys or items for early childhood and for pharmaceutical, cosmetic and medical applications.

Riblene AB 10 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene AB 10 is characterized by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene AB 10 are easily heat shrinkable and characterized by optimum mechanical properties. Main Applications Riblene AB 10 is recommended for the production of greenhouse film, heavy duty shrink film and industrial bags.

Riblene FC 20 BA is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 20 BA are easily heat shrinkable and characterised by optimum mechanical properties. It is recommended for the production of greenhouse film, heavy duty shrink film and industrial bags. Sustainability The product Riblene FC 20 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 20 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. The production of Riblene FC 20 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 20 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 20 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene FC 20 is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 20 are easily heat shrinkable and characterised by optimum mechanical properties. Main Application Riblene FC 20 is recommended for the production of greenhouse film, heavy duty shrink film and industrial bags.

Riblene FC 30 BA is recommended for the extrusion of agricultural films, medium and high loads shrink film, industrial bags. It is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 30 BA are easily heat shrinkable and characterised by optimum mechanical properties. Sustainability The product Riblene FC 30 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 30 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. The production of Riblene FC 30 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 30 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 30 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene FC 30 is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 30 are easily heat shrinkable and characterised by optimum mechanical properties. Main Application Riblene FC 30 is recommended for the extrusion of agricultural films, medium and high loads shrink film, industrial bags.

Riblene FC 39 BA is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 39 BA is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 39 BA are easily heat shrinkable and characterised by high rigidity, good mechanical and optical properties. Sustainability The product Riblene FC 39 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 39 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low-density polyethylene suitable for blown film technology. The production of Riblene FC 39 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 39 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 39 F BA is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 39 F BA is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 39 F BA are easily heat shrinkable and characterised by high rigidity, good mechanical and optical properties. Sustainability The product Riblene FC 39 F BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 39 F BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low-density polyethylene suitable for blown film technology. The production of Riblene FC 39 F BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 39 F BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 39 F is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 39 F is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 39 F are easily heat shrinkable and characterised by high rigidity, good mechanical and optical properties. Main Application Riblene FC 39 F is recommended for the production of medium rigidity shrink film characterized by good clarity and gloss.