UNITREX C30 extruded thermoplastic shapes provide users with the toughness, strength and chemical resistance inherent in unfilled PEEK as well as enhanced stiffness and compressive strength with improved dimensional stability through the addition of carbon fiber. UNITREX C30 shapes offer excellent wear resistance and a very low coefficient of friction. UNITREX C30 is available in multiple rod and plate configurations by special order. Minimum order quantities may apply, dependent on specific product configuration.

UNITREX CM3801 extruded thermoplastic shapes provide users with improved physical properties compared to standard, unfilled PEEK grades through the addition of a proprietary ceramic filler. Additionally, this material offers Continuous Use Temperature of up to 480 ° F (249 ° C). UNITREX CM3801 offers excellent dimensional stability and machinability for tight pitch/small diameter drilling operations and is especially well suited for IC test socket applications. Available in multiple rod and plate configurations by special order in natural white color.

Unitrex PEEK is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. Unitrex PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies. Unitrex PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled Unitrex PEEK offers good wear resistance, Unitrex L has been reinforced with graphite and PTFE to provide an ideal combination of low friction and enhanced wear. For applications that require improved strength and stiffness, a 30% glass fiber filled grade is available (Unitrex Rg-30). Unfilled Unitrex PEEK stock shapes are light beige in color and are available from Nytef Plastics in a full range of heavy gauge rod, plate and tubular bar sizes. PRODUCT ATTRIBUTES - 480°F relative thermal index temperature - Excellent strength, rigidity and toughness, even at elevated temperatures - Chemically resistant to all common solvents - Low moisture absorption - Superior electrical properties - Exceptional dimensional stability - Rated UL V-0 with low smoke and toxic gas emissions - Easily machined and fabricated - FDA compliant UNITREX Rg - 30% Glass fiber filled grade for improved strength and stiffness UNITREX L - Bearing and wear grade offers lower coefficient of friction and improved wear resistance INDUSTRIES - Medical and pharmaceutical - Aircraft and aerospace - Fluid handling - Electrical and electronics manufacturing - Automotive and transportation - Petroleum industry APPLICATIONS - Medical instruments - Analytical instrumentation - Semiconductor wafer handling components - Compressor components and seals - Pump wear rings - Bearings and bushings

UNITREX Lf20 extruded thermoplastic shapes provide users with improved physical properties compared to standard, unfilled PEEK grades through the addition of a proprietary PTFE filler. UNITREX Lf20 offers very good dimensional stability and machinability as well as exceptional wear resistance due to its low coefficient of friction. Available in a wide array of rod, tube and plate configurations by special order.

Unitrex PEEK is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. Unitrex PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies. Unitrex PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled Unitrex PEEK offers good wear resistance, Unitrex L has been reinforced with graphite and PTFE to provide an ideal combination of low friction and enhanced wear. For applications that require improved strength and stiffness, a 30% glass fiber filled grade is available (Unitrex Rg-30). Unfilled Unitrex PEEK stock shapes are light beige in color and are available from Nytef Plastics in a full range of heavy gauge rod, plate and tubular bar sizes. PRODUCT ATTRIBUTES - 480°F relative thermal index temperature - Excellent strength, rigidity and toughness, even at elevated temperatures - Chemically resistant to all common solvents - Low moisture absorption - Superior electrical properties - Exceptional dimensional stability - Rated UL V-0 with low smoke and toxic gas emissions - Easily machined and fabricated - FDA compliant UNITREX Rg - 30% Glass fiber filled grade for improved strength and stiffness UNITREX L - Bearing and wear grade offers lower coefficient of friction and improved wear resistance INDUSTRIES - Medical and pharmaceutical - Aircraft and aerospace - Fluid handling - Electrical and electronics manufacturing - Automotive and transportation - Petroleum industry APPLICATIONS - Medical instruments - Analytical instrumentation - Semiconductor wafer handling components - Compressor components and seals - Pump wear rings - Bearings and bushings

Unitrex PEEK is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. Unitrex PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies. Unitrex PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled Unitrex PEEK offers good wear resistance, Unitrex L has been reinforced with graphite and PTFE to provide an ideal combination of low friction and enhanced wear. For applications that require improved strength and stiffness, a 30% glass fiber filled grade is available (Unitrex Rg-30). Unfilled Unitrex PEEK stock shapes are light beige in color and are available from Nytef Plastics in a full range of heavy gauge rod, plate and tubular bar sizes. PRODUCT ATTRIBUTES - 480°F relative thermal index temperature - Excellent strength, rigidity and toughness, even at elevated temperatures - Chemically resistant to all common solvents - Low moisture absorption - Superior electrical properties - Exceptional dimensional stability - Rated UL V-0 with low smoke and toxic gas emissions - Easily machined and fabricated - FDA compliant UNITREX Rg - 30% Glass fiber filled grade for improved strength and stiffness UNITREX L - Bearing and wear grade offers lower coefficient of friction and improved wear resistance INDUSTRIES - Medical and pharmaceutical - Aircraft and aerospace - Fluid handling - Electrical and electronics manufacturing - Automotive and transportation - Petroleum industry APPLICATIONS - Medical instruments - Analytical instrumentation - Semiconductor wafer handling components - Compressor components and seals - Pump wear rings - Bearings and bushings

UNITRON PPS (Polyphenylene Sulfide) is a non-reinforced semi-crystalline polymer that offers exceptional strength and stability at elevated temperatures and is unaffected by even the harshest of chemical environments. Most acids, strong bases, fuels and even steam have virtually no affect on the physical properties of this material. While polyphenylene sulfide products have traditionally been know to be brittle, UNITRON PPS machines easily and exhibits excellent toughness. UNITRON PPS's extremely low moisture absorption rate and its low coefficient of thermal expansion contribute to this being one of the most dimensionally stable thermoplastic materials available. UNITRON PPS offers superior electrical properties, is rated UL94, V-0, and is tan in color. Nytef Plastics offers UNITRON PPS stock shapes in a wide range of heavy cross section rod, sheet, and tubular bar sizes. UNITRON PPS ATTRIBUTES - 425°F relative thermal index rating - Excellent strength and rigidity - Extremely low moisture absorption - Superior electrical properties - Flame resistant - UL 94, V-0 rated - Easily machined and fabricated TYPICAL INDUSTRIES - Pump, valve & compressor mfg. - Medical equipment - Pharmaceutical manufacturing - Aircraft and aerospace - Electrical and electronic products - Semiconductor manufacturing - Petroleum exploration & refining APPLICATIONS - Compressor vanes - Manifolds and valves - Electrical insulators, connectors and test sockets - Liquid chromatography components - Down hole drill & pump components - CMP clamp rings - Sensor components