Acryl (Acryl): Acryl (PMMA)
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
ACRYLITE® Satinice df21 8N | Nordamerika |
ACRYLITE® Satinice df21 8N, based on ACRYLITE® 8N, is characterized by diffuse scattering of light.
Typical properties of ACRYLITE® molding compound are
- good melt flow rate
- high mechanical strength, surface hardness and mar resistance
- very good weather resistance.
Special properties of ACRYLITE® Satinice df21 8N are
- good lightdiffusion combined with excellent light transmission.
Application:
Used for injection molding items for lighting engineering applications
|
ACRYLITE® Satinice df21 white 0V606 | Nordamerika |
ACRYLITE® Satinice df21 white 0V606 is a light scattering molding compound, based on ACRYLITE®, polymer spheres in the µm range and pigments.
The main properties are:
- Mie scattering
- less LED "Hot Spots"
- low profile luminaire design
- low wavelength dependent scattering
- forward and low backward scattering
- good transmittance
- velvet surface in extrusion
- reduced surface gloss
- excellent outdoor weathering properties
Suggested light in- and output:
Direct lit
Examples:
Luminaire covers, extruded profiles, injection molded parts, ambient light applications
Physical Form / Packaging:
ACRYLITE® Satinice df21 white 0V606 can be supplied in any base molding compound, when obtaining a certain minimum amount, as pellets of uniform size in a two layered 25 kg Polyethylene bag, further packaging upon request.
Specified Characteristic:
Vicat, MVR, Transmittance
More Information:
Part of the ACRYLITE® Satinice program,
Goniometer data available in 1- 3mm as Excel file
|
ACRYLITE® Satinice df22 8N | Nordamerika |
ACRYLITE® Satinice df22 8N, based on ACRYLITE® 8N, is characterized by diffuse scattering of light.
Typical properties of ACRYLITE® molding compound are
- good melt flow rate
- high mechanical strength, surface hardness and mar resistance
- very good weather resistance.
Special properties of ACRYLITE® Satinice df22 8N are
- very good lightdiffusion combined with excellent light transmission.
Application:
Used for injection molding items for lighting engineering applications
|
ACRYLITE® Satinice df23 8N | Nordamerika |
ACRYLITE® Satinice df23 8N is an amorphous thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA) and diffusion polymers.
Typical properties of ACRYLITE® molding compound are:
- excellent weather resistance
- high mechanical strength
- high surface hardness and mar resistance
- good melt flow rate
- superior light diffusion (hiding power) and transmittance
The special properties of ACRYLITE® Satinice df23 8N are:
- excellent light diffusion combined with excellent light transmission
- highest heat resistance
- high melt strength
- low levels of lubricant
Application:
Used for injection molding and extrusion of lighting luminaries, instrument displays and extruded profiles.
|
ACRYLITE® Satinice ZD 23 | Nordamerika |
ACRYLITE® Satinice ZD 23 polymer is an amorphous, impact-modified light diffusing thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA).
Typical properties of ACRYLITE® Satinice zdf polymers are:
- high weather resistance
- superior light diffusion (hiding power) and transmittance
- improved resistance to stress cracking
- good melt flow rate
- easy to color
The special properties of ACRYLITE® Satinice ZD 23 polymer are:
- high impact/break resistance and strength
- medium melt flow rate
- high heat resistance
- FDA food contact uses
Application:
Used for injection molded parts.
|
ACRYLITE® Satinice ZD 24 | Nordamerika |
ACRYLITE® Satinice ZD 24 polymer is an amorphous, impact-modified light diffusing thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA).
Typical properties of ACRYLITE® Satinice zd polymers are:
- high weather resistance
- superior light diffusion (hiding power) and transmittance
- improved resistance to stress cracking
- good melt flow rate
- easy to color
The special properties of ACRYLITE® Satinice ZD 24 polymer are:
- high impact/break resistance and strength
- high melt strength
- high heat resistance
Application:
Used for extrusion applications including profiles and sheet.
|
ACRYPET™ IR D50 | Afrika und Mittlerer Osten | |
ACRYPET™ IR G304 | Afrika und Mittlerer Osten | |
ACRYPET™ IR G504 | Afrika und Mittlerer Osten | |
ACRYPET™ IR H30 | Afrika und Mittlerer Osten | |
ACRYPET™ IR H50 | Afrika und Mittlerer Osten | |
ACRYPET™ IR H70 | Afrika und Mittlerer Osten | |
ACRYPET™ IR K304 | Afrika und Mittlerer Osten | |
ACRYPET™ IR S204 | Afrika und Mittlerer Osten | |
ACRYPET™ IR S404 | Afrika und Mittlerer Osten | |
ACRYPET™ MD | Afrika und Mittlerer Osten | |
ACRYPET™ MF | Afrika und Mittlerer Osten | |
ACRYPET™ TF8 | Afrika und Mittlerer Osten | |
ACRYPET™ TF9 | Afrika und Mittlerer Osten | |
ACRYPET™ V | Afrika und Mittlerer Osten | |
ACRYPET™ VH | Afrika und Mittlerer Osten | |
ACRYPET™ VH4 | Afrika und Mittlerer Osten | |
ACRYPET™ VH5 | Europa | |
ACRYPET™ VHM | Europa | |
ACRYPET™ VHS | Europa | |
ACRYPET™ VR L40 | Afrika und Mittlerer Osten | |
ACRYPET™ VR S40 | Afrika und Mittlerer Osten | |
ACRYREX® CM-205 | Afrika und Mittlerer Osten |
High viscosity
|
ACRYREX® CM-205G | Afrika und Mittlerer Osten | |
ACRYREX® CM-205M | Afrika und Mittlerer Osten |
High viscosity , Higher flow compared to CM 205
|
ACRYREX® CM-207 | Afrika und Mittlerer Osten |
Medium viscosity
|
ACRYREX® CM-207G | Afrika und Mittlerer Osten | |
ACRYREX® CM-211 | Afrika und Mittlerer Osten |
Low viscosity
|
ACRYREX® CM-211G | Afrika und Mittlerer Osten | |
ACRYREX® CM-220HT | Afrika und Mittlerer Osten |
High heat resistant
|
ALCOLOR® PMMA A WT949-1842 | Asien Pazifik |
Base Polymer
Polymethylmethacrylate
Colour
white
Thermal Stability Colourant
300 °C max.
Light Fastness Colourant
blue woolscale 8
For Use In
Polymethylmethacrylate
Special Features
free from cadmium, lead and diarylide pigments, dust-free, high dispersibility, high additive content
Market Segment
Lighting, Furniture, building and construction, cosmetics, jewellery
Application Area
injection moulded parts
Dosage
injection moulding 3,0-4,0 %
dependant on wall thickness and required colour intensity
dependant on application and operational area
|
ALCOM® LDDC PMMA 1000 UV 18124 BK1074-11 | Asien Pazifik |
Base Polymer
Polymethylmethacrylate
Filler/Additive System
UV stabilised
Special Features
translucent
Market Segment
Automotive, Lighting
Application Area
lighting, light transparent components, Black Panel-Technology
Typical Applications
lamp covers, display elements, operating elements
|
ALCOM® LDDC PMMA 1000UV18123 BK1016-11 | Asien Pazifik |
Base Polymer
Polymethylmethacrylate
Filler/Additive System
UV stabilised
Special Features
translucent
Market Segment
Automotive, Lighting
Application Area
interior decoration / finishing, light transparent components, Black Panel-Technology
Typical Applications
lamp covers, display elements, operating elements
|
ALTUGLAS™ BS 100 | Asien Pazifik |
ALTUGLAS® BS 100 is a cross-linked methyl-methacrylate based copolymer available in the form of insoluble spherical particles (solids beads) of small size and narrow size distribution.
ALTUGLAS® BS 100 is totally insoluble in water and not soluble in most of organic solvents and monomers (with limited but variable swelling depending on the nature of the solvent). ALTUGLAS® BS 100 is recommended as Matting or Anti-scratch or Anti-slip agent especially for waterborne coatings. Its small size and its composition lead to easy and good dispersion in any coating system.
ALTUGLAS® BS 100 is also greatly effective as Matting and Light diffusing agent when compounded in other thermoplastic polymers.
The narrow particle size distribution of ALTUGLAS® BS 100 ensures homogeneous and reproducible effects.
|
ALTUGLAS™ BS 130 | Asien Pazifik |
ALTUGLAS® BS 130 is a cross-linked methyl-methacrylate based copolymer available in the form of insoluble spherical particles (solids beads) of small size and narrow size distribution.
ALTUGLAS® BS 130 is not thermoplastic, totally insoluble in water and not soluble in most of organic solvents and monomers (with limited but variable swelling due to solvent nature). ALTUGLAS® BS 130 is recommended as Matting or Anti-scratch or Anti-slip agent especially for waterborne coatings. Its small particle size and its acrylic composition lead to easy and good dispersion in many coating systems.
ALTUGLAS® BS 130 is also greatly effective as Matting or Light diffusing agent when compounded in other thermoplastic polymers.
The narrow particle size distribution of ALTUGLAS® BS 130 ensures homogeneous and reproducible effects.
|