Phenol (Phenol): Sumikon®
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
Sumikon® PM-3025 | Asien Pazifik |
SUMIKON® PM-3025 Type Black is a mineral and glass fiber filled phenolic molding compound with excellent mechanical and thermal properties.
|
Sumikon® PM-3027 | Asien Pazifik |
SUMIKON PM-3027 Type Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-3028 | Asien Pazifik |
SUMIKON PM-3028 Type J Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-3050 | Asien Pazifik |
SUMIKON® PM-3050 (Type J Black) is Glass fiber, Inorganic filler and Organic fiber filled novolac resin molding compound with good mechanical property.
|
Sumikon® PM-3075 | Asien Pazifik |
SUMIKON® PM-3075 Type JK Black is Glass fiber filled resol resin molding compound with good mechanical property and heat resistance.
|
Sumikon® PM-5610 | Asien Pazifik |
SUMIKON® PM-5610 (Type J Black) is Glass fiber, Inorganic filler and Organic fiber filled novolac resin molding compound with good mechanical property.
|
Sumikon® PM-5620 | Asien Pazifik |
SUMIKON® PM-5620 (Type J Black) is Glass fiber and Graphite filled novolac resin molding compound with good wear resistance.
|
Sumikon® PM-5630 | Asien Pazifik |
SUMIKON PM-5630 Type Black is a Mineral & Short Glass fiber molding compound based on Phenolic Resol polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-5900 | Asien Pazifik |
SUMIKON® PM-5900 (Type JA Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound. This grade is official registered UL with V-0 (t=3.0).
|
Sumikon® PM-6230 | Asien Pazifik |
SUMIKON PM-6230 Type Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-6280 | Asien Pazifik |
SUMIKON PM-6280 Type Black is a Short Glass fiber molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-6330 | Asien Pazifik |
SUMIKON PM-6330 Type J Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-6430 (Compression) | Nordamerika |
Durez "SUMIKON" PM-6430 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance and machineability. Typical applications include commutators.
|
Sumikon® PM-6430 (Injection) | Nordamerika |
Durez "SUMIKON" PM-6430 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance and machineability. Typical applications include commutators.
|
Sumikon® PM-6432 | Asien Pazifik |
SUMIKON PM-6432 Type Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-6440 | Asien Pazifik |
SUMIKON PM-6440 Type J Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-6530 | Asien Pazifik |
SUMIKON® PM-6530 (Type Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and good electronic property.
|
Sumikon® PM-6545 | Asien Pazifik |
SUMIKON® PM-6545 type black is Glass fiber filled resol resin molding compound with good mechanical property and heat resistance. This grade suits UL1004.
|
Sumikon® PM-6600 | Asien Pazifik |
SUMIKON® PM-6600 Type Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-6630 (Type: Black) | Asien Pazifik |
SUMIKON PM-6630 Type Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding. This grade is official registered UL with V-0 (t=3.0).
|
Sumikon® PM-6630 (Type: J Black) | Asien Pazifik |
SUMIKON PM-6630 Type J Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding. This grade is official registered UL with V-0 (t=3.0).
|
Sumikon® PM-6830 (Type: Black) | Asien Pazifik |
SUMIKON® PM-683 (Type Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=4.5).
|
Sumikon® PM-6830 (Type: Natural) | Asien Pazifik |
SUMIKON® PM-6830 (Type Natural) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=4.2).
|
Sumikon® PM-6930 | Asien Pazifik |
SUMIKON® PM-6930 (Type H Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good electronic property and heat resistance. This grade is official registered UL with V-0 (t=4.5).
|
Sumikon® PM-725 (Type: J Black) | Asien Pazifik |
SUMIKON PM-725 Type J Black is a Graphite molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding.
|
Sumikon® PM-9501 (Compression) | Asien Pazifik |
Durez "SUMIKON" PM-9501 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance. Typical applications include brush holders, housings, and heat insulators.
|
Sumikon® PM-9501 (Injection) | Asien Pazifik |
Durez "SUMIKON" PM-9501 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance. Typical applications include brush holders, housings, and heat insulators.
|
Sumikon® PM-9501 | Asien Pazifik |
SUMIKON® PM-9501 (Type J Black) is Glass fiber and inorganic filler filled novolac resin molding compound with good mechanical property. This grade is official registered UL with V-0 (t=1.5).
|
Sumikon® PM-9610 (Compression) | Nordamerika |
Durez "SUMIKON" PM-9610 black Phenolic is a two stage glass and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and higher dimensional stability with excellent heat resistance. Typical applications include brush holders for high temperature, and timing pulleys.
|
Sumikon® PM-9610 (Injection) | Nordamerika |
Durez "SUMIKON" PM-9610 black Phenolic is a two stage glass and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and higher dimensional stability with excellent heat resistance. Typical applications include brush holders for high temperature, and timing pulleys.
|
Sumikon® PM-9615 | Asien Pazifik |
SUMIKON® PM-9615 (Type J Black) is Glass fiber filled novolac resin molding compound with good mechanical property and heat resistance.
|
Sumikon® PM-9625 | Asien Pazifik |
SUMIKON® PM-9625 (Type J Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good electronic property.
|
Sumikon® PM-9630 (Type: J Black) | Asien Pazifik |
SUMIKON® PM-9630 (Type J Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=0.16).
|
Sumikon® PM-9630 (Type: JK Black) | Asien Pazifik |
SUMIKON® PM-9630 (Type JK Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good electronic property and heat resistance. This grade is official registered UL with V-0 (t=0.16).
|
Sumikon® PM-9630 (Type: JT Black) | Asien Pazifik |
SUMIKON® PM-9630 (Type JT Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good electronic property and heat resistance. This grade is official registered UL with V-0 (t=0.16).
|
Sumikon® PM-9640 (Compression) | Nordamerika |
Durez "SUMIKON" PM-9640 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance. PM-9640 is widely used in automotive applications. Typical applications include motor housings, brush holders, and heat insulators.
|
Sumikon® PM-9640 (Injection) | Nordamerika |
Durez "SUMIKON" PM-9640 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance. PM-9640 is widely used in automotive applications. Typical applications include motor housings, brush holders, and heat insulators.
|
Sumikon® PM-9640 | Asien Pazifik |
SUMIKON® PM-9640 (Type JR Black) is Glass fiber filled novolac resin molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=1.6).
|
Sumikon® PM-9820 | Asien Pazifik |
SUMIKON® PM-9820 (Type JR Black) is Organic fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good electronic property and heat resistance. This grade is official registered UL with V-0 (t=0.16).
|
Sumikon® PM-9840 | Asien Pazifik |
SUMIKON® PM-9840 (Type J Black) is Glass fiber , Inorganic filler and Organic fiber filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=0.17).
|