Polypropylen (PP): PP Homopolymer
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
Borealis PP HD214CF | Afrika und Mittlerer Osten |
HD214CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
HD214CF contains antiblock but no slip agent
|
Borealis PP HD234CF | Afrika und Mittlerer Osten |
HD234CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
HD234CF contains antiblock and slip agents.
|
Borealis PP HD244CF | Afrika und Mittlerer Osten |
HD244CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
HD244CF contains slip additive and antioxidant.
|
Borealis PP HD601CF | Afrika und Mittlerer Osten |
HD601CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
Applications
HD601CF is recommended for
- Textile packaging film
- Food packaging
- Lamination films
- Stationary films
- Flower packaging
Special features
HD601CF is optimised to deliver:
- Easy processability
- Good mechanical properties
- Heat sterilisable
- High stiffness
- Good optical properties
|
Borealis PP HD905CF-02 | Afrika und Mittlerer Osten |
HD905CF-02 is a polypropylene homopolymer
HD905CF-02 is a nucleated, high crystalline film resin. This grade is suitable for the manufacturing of unoriented films on chill roll processes. Optical properties will not deteriorate as with conventional homo- or copolymers at elevated temperatures.
CAS-No.: 9003-07-0
Applications
HD905CF-02 is recommended for:
- Twist film
- Textile packaging film
- Label film
- Hot fill
- Lamination films
Special Features
HD905CF-02 is optimised to deliver:
- Very high stiffness
- Excellent planarity
- Excellent temperature resistance
- Very good optical properties
|
Borealis PP HE125MO | Afrika und Mittlerer Osten |
HE125MO is a polypropylene homopolymer intended for injection moulding. This grade is characterized by good flow properties and high stiffness in and is specially suitable for high-speed injection moulding of articles demanding easy flow.
Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems.
Applications
- House ware and thin wall packaging
- Articles with rather long and narrow flow lengths
Special Features
- Good flow behaviour
- High stiffness
|
Borealis PP HE370FB | Afrika und Mittlerer Osten |
HE370FB is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HE370FB is recommended for:
Staple fibre for nonwoven
Special features
HE370FB is optimised to deliver:
- Easy processability
- Optimal product consistency
- Excellent spinning performance on low and high speed technologies
|
Borealis PP HF136MO | Afrika und Mittlerer Osten |
HF136MO is a polypropylene homopolymer intended for injection moulding. This grade is characterized by a good combination of mechanical and flow properties.
This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage.
Applications
Caps and closures
|
Borealis PP HF420FB | Afrika und Mittlerer Osten |
HF420FB is a polypropylene homopolymer intended for fibre applications.
|
Borealis PP HF700SA | Afrika und Mittlerer Osten |
HF700SA is a polypropylene homopolymer intended for injection moulding.
This material has excellent balanced mechanical properties and is easy to process.
Applications
HF700SA has been developed especially for applications like:
- Household applications
Special Features
- UL registered under File E108112
- High heat stabilised
- Excellent flowability
- Excellent antistatic performance
|
Borealis PP HG313MO | Afrika und Mittlerer Osten |
HG313MO is a polypropylene homopolymer intended for injection moulding. Its high melt flow makes it especially suitable for products with long flow length. This grad is designed for high-speed injection moulding and contains nucleating, antistatic and slip additives.
This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Products originating from this grade have very good demoulding and anti-static properties, high stiffness, good transparency and gloss, and good impact strength at ambient temperatures.
Applications
- Thin wall containers
- Square containers
- Rectangular and flat products, like lids and trays
- Caps and closures
Special features
- High stiffness
- High impact strength
- Excellent antistatic properties
- Improved gloss and excellent transparency
|
Borealis PP HG385MO | Afrika und Mittlerer Osten |
HG385MO is a polypropylene homopolymer intended for injection moulding. This grade combines unique Borstar reactor design with Borealis Nucleation Technology (BNT) to produce highly-crystalline polypropylene. This product is characterized by excellent flow properties combined with a narrow molecular weight distribution well suited for low distortion products. This grade contains anti-static and slip additives, which result in short cycle time, good demoulding and low dust attraction.
Products moulded from this grade exhibit excellent dimension consistency combined with high stiffness.
Applications
- Caps and closures
- Items requiring good antistatic properties
Special Features
- High stiffness
- Excellent antistatic properties
|
Borealis PP HG430MO | Afrika und Mittlerer Osten |
HG430MO is a polypropylene homopolymer intended for injection moulding. This polymer product is characterized by a superior impact resistance. This grade has ductile failure in falling weight impact test at room temperature. This product is characterized by excellent flow properties combined with a narrow molecular weight distribution well suited for low distortion products. This grade contains anti-static and slip additives, which result in short cycle time, good demoulding and low dust attraction.
Applications
- Caps and closures
- Items requiring good antistatic properties
Special features
- Good flow behaviour
- Excellent antistatic properties
|
Borealis PP HG455FB | Afrika und Mittlerer Osten |
HG455FB is a polypropylene homopolymer intended for fibre applications
Applications
HG455FB is recommended for
- Fine filament count at high spinning speeds
- Spunbonded nonwovens
- POY production
Special features
- HG455FB is optimised to deliver:
Easy processability
- Anti-gasfading stabilisation
- Optimal product consistency
- Very good flow
- Controlled rheology
|
Borealis PP HG475FB | Afrika und Mittlerer Osten |
HG475FB - is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HG475FB is recommended for:
- Fine filament count at high spinning speeds
- POY production
- Spunbonded nonwovens
Special features
HG475FB is optimised to deliver:
- Easy processability
- Very good flow
- Anti-gasfading stabilisation
- Controlled rheology
- Optimal product consistency
|
Borealis PP HH450FB | Afrika und Mittlerer Osten |
HH450FB is a polypropylene homopolymer intended for fibre applications.
|
Borealis PP HJ120UB | Afrika und Mittlerer Osten |
HJ120UB is a special low viscosity polypropylene homopolymer developed to fit the production of fibre reinforced thermoplastics.
Applications
HJ120UB has been developed especially for applications like:
- Under the bonnet components
- Noise shields
- Front end carriers
- Under body shieldings
- Dashboard carriers
- Battery supports
Special Features
HJ120UB This material contains basic stabilisation.
Low emission
|
Borealis PP HJ325MO | Afrika und Mittlerer Osten |
HJ325MO is a polypropylene homopolymer intended for injection moulding. Its very high melt flow makes it especially suitable for thin-wall packaging and products with long flow length. is designed for high-speed injection moulding and contains nucleating and antistatic additives. The additives are optimized to provide reduced tendency for mould plate-out.
This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Components moulded from this grade show good ejectability and combine good stiffness with good transparency and gloss, good antistatic properties and good impact strength at ambient temperatures.
Applications
- Thin wall containers
- Square containers
- Rectangular and flat products, like lids and trays
- Caps and closures
Special features
- Good stiffness
- Good impact strength
- Excellent antistatic properties
- Improved gloss and excellent transparency
|
Borealis PP HK060AE | Afrika und Mittlerer Osten |
HK060AE is a special low viscosity polypropylene homopolymer compound developed to fit the production of Glass Matt reinforced Thermoplastics. This material is also suitable as base resin for the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process.
Applications
HK060AE has been developed especially for applications like:
- Front end carriers
- Dashboard carriers
- Under body shieldings
- Battery supports
- Noise shields
Special Features
HK060AE contains a basic conversion and long term heat stabilisation.
|
Borealis PP HL708FB | Afrika und Mittlerer Osten |
HL708FB is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HL708FB is recommended for:
- Micro denier fibres at high spinning speeds
- Melt blown applications
Special features
HL708FB is optimised to deliver:
- Controlled rheology
- Very high flow
- Easy processability
- Perfect suitable for electrostatic charging
Optimal product consistency
|
Borealis PP HL712FB | Afrika und Mittlerer Osten |
HL712FB is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HL712FB is recommended for:
- Micro denier fibres at high spinning speeds
- Melt blown applications
Special features
HL712FB is optimised to deliver:
- Controlled rheology
- Optimal product consistency
- Easy processability
- Very high flow
|
Borflow™ HL504FB | Afrika und Mittlerer Osten |
Borflow HL504FB is a polypropylene homopolymer intended for fibre applications.
Applications
Borflow HL504FB has been developed especially for applications like:
- Micro denier fibres at high spinning speeds
- Melt blown applications
Special features
- Controlled rheology
- Easy processability
- Optimal product consistency
- Very high flow
|
Borflow™ HL508FB | Afrika und Mittlerer Osten |
Borflow HL508FB is a polypropylene homopolymer intended for fibre applications
Applications
Borflow HL508FB has been developed especially for applications like:
- Micro denier fibres at high spinning speeds
- Melt blown applications
Special features
- Controlled rheology
- Very high flow
- Easy processability
- Perfect suitable for electrostatic charging
- Optimal product consistency
|
Borflow™ HL512FB | Afrika und Mittlerer Osten |
Borflow HL512FB is a polypropylene homopolymer intended for fibre applications
Applications
Borflow HL512FB is recommended for:
- Micro denier fibres at high spinning speeds
- Melt blown applications
Special features
Borflow HL512FB is optimised to deliver:
- Controlled rheology
- Easy processability
- Optimal product consistency
- Very high flow
|
Bormed™ DM55 pharm | Afrika und Mittlerer Osten |
Bormed DM55pharm is a polypropylene homopolymer
This grade is suitable for the manufacturing of non-oriented films on chill roll process or wather bath technology.
CAS-No.: 9003-07-0
Applications
Bormed DM55pharm has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed DM55pharm .
- Blister for tablets
- Capillary tubes for aerosols
- Blister for pills
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Good contact clarity
- Very good processability
- Very good stiffness and impact balance
- Very good thermoformability
|
Bormed™ HD800CF | Afrika und Mittlerer Osten |
Bormed HD800CF is a polypropylene homopolymer
The current version of Bormed HD800CF has been scheduled for deletion.
Please refer to Bormed HD800CF-11 documentation for new projects.
In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process. This grade can also be processed using injection moulding technology.
CAS-No.: 9003-07-0
Applications
Bormed HD800CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HD800CF .
- Medical device packaging
- Parenteral nutrition bags
- Closures
- Pouches for IV solutions
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Secondary packaging
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- Sterilisability by means of water steam
- Low haze
- High stiffness
- Very good heat deformation resistance
- High water vapour barrier
|
Bormed™ HD800CF-11 | Afrika und Mittlerer Osten |
Bormed HD800CF-11 is a polypropylene homopolymer
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process. This grade can also be processed using injection moulding technology.
|
Bormed™ HD810MO | Afrika und Mittlerer Osten |
Bormed HD810MO is a resin intended for evaluation for use in Healthcare applications. Bormed HD810MO is a nucleated polypropylene homopolymer with a medium melt flow rate. Bormed HD810MO is specially formulated for production of articles which need to be sterilized with radiation (gamma and beta radiation). Tests on specimen radiated at 25 kGy have shown stability for 5 years when stored at room temperature. Material can also well be sterilised with ethylene oxide or steam.
Applications
Bormed HD810MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HD810MO .
- Disposable non pre-filled syringes
- Catheter
- Blood collection systems
- Laboratory disposable
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- Radiation resistance
- High transparency
|
Bormed™ HD850MO | Afrika und Mittlerer Osten |
Bormed HD850MO is a resin intended for evaluation for use in Healthcare applications.
Bormed HD850MO is a medium melt-flow-rate polypropylene homopolymer. This grade gives exceptional good dimensional stability to final products, especially at higher temperatures. The fast crystallisation and its high crystallization temperature give possibilities for the reduction in cycle time. Material can be sterilised with vapour (121°C for 20 min) or EtO.
Applications
Bormed HD850MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HD850MO .
- Dosing units
- Aerosol devices
- Filter housings for Haemodialysis
- Pharmaceutical & diagnostic packaging in solid dose form or for oral and/or topical admistration
- Caps
- Closures
- Bottles & Boxes as Packaging for pharmaceutical & diagnostic products
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High stiffness
- Medical compliance
- Dimensional stability also in autoclave
- Low extractables
|
Bormed™ HF840MO | Afrika und Mittlerer Osten |
Bormed HF840MO is a resin intended for evaluation for use in Healthcare applications.
Bormed HF840MO is a polypropylene homopolymer modified with a slip agent and typically used in injection moulding. It is characterized by a good processability and an easy de-moulding. Products produced from Bormed HF840MO are characterised by a controlled low friction, good physical properties and low warpage because of the narrow molecular distribution. Bormed HF840MO can be sterilised with ethylene oxide or steam.
Applications
Bormed HF840MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HF840MO .
- Disposable syringe barrels
- Needle cover
- Catheter connections
- Aerosol valves
- Closures
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Easy processing
- Low friction
|
Bormed™ HG820MO | Afrika und Mittlerer Osten |
Bormed HG820MO is a resin intended for evaluation for use in Healthcare applications.
Bormed HG820MO is a clarified homopolymer and typically used in injection moulding. Additivation has been optimized to provide good demoulding properties. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low risk of warpage. Bormed HG820MO can be sterilised with ethylene oxide or steam.
Applications
Bormed HG820MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HG820MO .
- Disposable non pre-filled syringes
- Laboratory disposable
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Easy processing
- Good transparency
|
Bormed™ HG820MO-11 | Afrika und Mittlerer Osten |
Bormed HG820MO-11 is a resin intended for evaluation for use in Healthcare applications.
Bormed HG820MO is a clarified homopolymer and typically used in injection moulding. Additivation has been optimized to provide good demoulding properties. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low risk of warpage. Bormed HG820MO can be sterilised with ethylene oxide or steam.
Applications
Bormed HG820MO-11 has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HG820MO-11 .
- Disposable non pre-filled syringes
- Laboratory disposable
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Easy processing
- Good transparency
|
Bormed™ HJ875MO | Afrika und Mittlerer Osten |
Bormed HJ875MO is a resin intended for evaluation for use in Healthcare applications.
Bormed HJ875MO is a high flow polypropylene Homopolymer. High flow enables lower cycle time, high injection rate and design of thin wall packaging. This grade is formulated for optimised extractables. Material can be sterilised with vapour (121 °C for 20 minutes) or EtO.
|
Bormod™ HD905CF | Afrika und Mittlerer Osten |
HD905CF is a polypropylene homopolymer
HD905CF is a nucleated, high crystalline film resin. This grade is suitable for the manufacturing of unoriented films on chill roll processes. Optical properties will not deteriorate as with conventional homo- or copolymers at elevated temperatures.
CAS-No.: 9003-07-0
Applications
HD905CF is recommended for:
- Twist film
- Textile packaging film
- Label film
- Hot fill
- Lamination films
Special features
HD905CF is optimised to deliver:
- Very high stiffness
- Excellent planarity
- Excellent temperature resistance
- Very good optical properties
|
BP RPP 2012 T BLK | Nordamerika |
Our Talc Filled product lines exhibit excellent properties such as high stiffness surface aesthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and mar resistance, and resistance to some aggressive chemical agents. Buckeye Polymers can also customize these materials through the addition of UV packages, custom color matching, and processing additives.
Features:
- Increased stiffness and heat deflection
- UV resistance, good
- Industrial, appliance, construction markets
- Scratch and mar resistance, good
|
Braskem PP 5E16S | Nordamerika |
Good processability, contains antistatic additive
Applications
Suggested uses include caps and closures, thin-wall containers and serviceware applications
|
Braskem PP Amppleo 1020GA | Lateinamerika |
AMPPLEO 1020 GA - Homopolymer with High Melt Strength (HMS) - is a resin designed for process that requires High Melt Strength. This product exhibit excellent processability, foamability and melt elongation properties, very good mechanical properties and sagging resistance.
Applications:
Foamed products, Thermoforming, General foams (sheets, planks, tubes and profiles), Films
Processing Conditions:
Thermoforming, Foaming, Extrusion
|
Braskem PP Amppleo 1025MA | Nordamerika |
High melt strength resin, excellent processability, enhanced foamability, and very good mechanical properties
Applications
Suggested uses include general foams (sheets, planks, tubes, and profiles), films, and thermoformed parts
|
Braskem PP CP1200B | Nordamerika |
General purpose
Applications
Suggested use is for compounding
|
Braskem PP CP250H | Nordamerika |
Narrow MWD, low smoke / condensate
Applications
Suggested uses include spunbond nonwovens, high-speed fiber spinning - continuous filament yarns, staple fiber
|