Polypropylen (PP): TPO
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
BP Flex D 0850 BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 4107 C BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 4107 CU BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 4107 GO1 BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 5512 RU BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 5518 R 848 | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 5618 T RXF | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 5718 TU BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 5818 T BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 6017 T BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
|
BP Flex D 6020 BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 6020 U BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 6020-08 BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 6509 CU BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 6512 BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 6520 T BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance, Good
- Density, Low
- Wide service range from -20 degrees C to 120 degrees C
|
BP Flex D 7030 BLK | Nordamerika |
Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.
Features:
- Tear Resistance, High
- UV Resistance - Available
- Abrasion Resistance, Moderate
- Wide service range from -20 degrees C to 120 degrees C
- High Impact resistance
|
Daplen™ BB077UBB | Afrika und Mittlerer Osten |
Daplen BB077UBB is a polypropylene compound intended for injection moulding.
|
Daplen™ ED306UBB | Afrika und Mittlerer Osten |
Daplen ED306UBB is a 30% mineral filled polypropylene compound intended for injection moulding.
|
Daplen™ EE103AE | Afrika und Mittlerer Osten |
Daplen EE103AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness, gives a good surface quality and is easy to process.
Applications
Daplen EE103AE has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
Special Features
- Suitable for applications, which require low expansion over a broad temperature scale
- High flowability allowing to mould complex-structured parts with very high "flow path / wall thickness ratios"
- Available with and without UV-stabilisation
|
Daplen™ EE103AEB | Afrika und Mittlerer Osten |
Daplen EE103AEB is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
Applications
Daplen EE103AEB has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
Special features
- Suitable for applications, which require low expansion over a broad temperature scale
- High flowability allowing to mould complex-structured parts with very high "flow path / wall thickness ratios"
- Excellent balance in stiffness and impact resistance
|
Daplen™ EE108AE | Afrika und Mittlerer Osten |
Daplen EE108AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
|
Daplen™ EE158AI | Afrika und Mittlerer Osten |
Daplen EE158AI is a 13% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness, gives a good surface quality and is easy to process.
Applications
Daplen EE158AI has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Trunk claddings
- Pillar trims
- Other automotive interior parts
- Door panels and pockets
Special Features
- Excellent scratch resistance
- High dimensional stability
- No tendency to show stickiness after outdoor exposure
|
Daplen™ EE158AIB | Afrika und Mittlerer Osten |
Daplen EE158AIB is a 13% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen EE158AIB has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Door panels and pockets
- Automotive interior applications
Special features
- High scratch resistance
- No tendency to show stickiness after outdoor exposure
|
Daplen™ EE188AIB | Afrika und Mittlerer Osten |
Daplen EE188AIB is a 15% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen EE188AIB has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Door panels and pockets
Special features
- Good stiffness and impact balance
|
Daplen™ EE189HP | Afrika und Mittlerer Osten |
Daplen EE189HP is a 15% mineral filled polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness, gives a good surface quality and is easy to process.
Applications
Daplen EE189HP has been developed especially for the car industry to be used in automotive interior parts.
- Door panels and pockets
- Center consoles
- Window frames
- Other automotive interior parts
Special Features
- High scratch resistance
- No tendency to show stickiness after outdoor exposure
|
Daplen™ EF007AEB | Afrika und Mittlerer Osten |
Daplen EF007AEB is a polypropylene compound intended for injection moulding.
|
Daplen™ EF109AEB | Afrika und Mittlerer Osten |
Daplen EF109AEB is a 20% mineral filled elastomer modified polypropylene compound intended for injection moulding.
Applications
Daplen EF109AEB has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
Special features
- Low thermal expansion
- Suitable for applications, which require low expansion over a broad temperature scale
- Excellent stiffness and impact balance
- Optimised surface
|
Daplen™ EF150HP | Afrika und Mittlerer Osten |
Daplen EF150HP is a mineral filled elastomer modified high performance polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties, gives a good surface quality and is easy to process.
Applications
Daplen EF150HP has been developed especially for the automotive industry.
- Body panels
- Bumpers
- Exterior trims
- Rocker panels
- Front grills
Special Features
- Available with and without UV-stabilisation
- Low thermal expansion
- Excellent stiffness at low density
- High surface aesthetics
|
Daplen™ EF210AEB | Afrika und Mittlerer Osten |
Daplen EF210AEB is a 20% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties, gives a good surface quality and is easy to process.
Applications
Daplen EF210AEB has been developed especially for the automotive industry.
- Bumpers
- Exterior trims
Special features
- Suitable for applications, which require low expansion over a broad temperature scale
- UV stabilised
- Excellent surface appearance on unpainted and grained parts
- High scratch resistance
|
Daplen™ EG206AIB | Afrika und Mittlerer Osten |
Daplen EG206AIB is a 22% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen EG206AIB has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Door panels and pockets
- Pillar trims
- Other automotive interior parts
Special features
- Very good stiffness and impact balance
- Low gloss
- High scratch resistance
|
Daplen™ EG251AIB | Afrika und Mittlerer Osten |
Daplen EG251AIB is a 20% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen EG251AIB has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Door panels and pockets
Special features
- Very good stiffness and impact balance
- No tendency to show stickiness after outdoor exposure
- High scratch resistance
|
Daplen™ EG340AE | Afrika und Mittlerer Osten |
Daplen EG340AE is a 30% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties, gives a good surface quality and is easy to process.
Applications
Daplen EG340AE has been developed especially for the automotive industry.
- Rocker panels
- Front grills
- Automotive exterior applications
Special Features
- Low thermal expansion
- Dimensional stability
|
Daplen™ EH222AEB | Afrika und Mittlerer Osten |
Daplen EH222AEB is a 20% mineral filled polypropylene compound intended for injection moulding.
|
Daplen™ EH227AE | Afrika und Mittlerer Osten |
Daplen EH227AE is a mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness, high melt flow rate and gives a good surface quality.
Applications
- Automotive exterior applications
- Rocker panels
- Exterior trims
Special Features
- UV stabilised
- High flowability allowing to mould complex-structured parts with very high "flow path / wall thickness ratios"
- Excellent surface appearance on unpainted and grained parts
|
Daplen™ MD250SY | Europa |
Daplen MD250SY is a 20% mineral filled polypropylene compound intended for injection moulding. It contains 50% post-consumer recycled polymer.
Applications
Daplen MD250SY is intended for:
- Automotive exterior applications
- Automotive under the bonnet parts
- Other automotive parts
|
Daplen™ ME319UBB | Afrika und Mittlerer Osten |
Daplen ME319UBB is a 30% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen ME319UBB has been developed especially for the automotive industry.
- Climate control housings
- Under the bonnet components
Special features
- Good stiffness and impact balance
|
Daplen™ MF280WGB | Afrika und Mittlerer Osten |
Daplen MF280WGB is a 20% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen MF280WGB has been developed especially for the white goods industry.
- White goods
- Air conditioning parts
Special features
- UV stabilised
- High stiffness
- Excellent flow
|
DynaStat® 147 | Europa |
Antistatic Polypropylene Compound
Features:
- Permanently Antistatic
- Good Dimensional Stability
- Excellent Processability
Applications:
- Packaging
- Industrial
- Electrical/Electronic Applications
|
DynaStat® 157 | Europa |
Antistatic Polypropylene Compound
Features:
- Permanently Antistatic
- Good Dimensional Stability
- Excellent Processability
Applications:
- Packaging
- Industrial
- Electrical/Electronic Applications
|