Polyether block amide Pebax® 7233 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Pebax® 7233 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response. Upon request, letters regarding USP Class VI compliance can be provided.

Polyether block amide Pebax® 7233 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is suitable for food contact applications.

Polyether block amide Pebax® 7233 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.

Polyether block amide 7433 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Pebax® 7433 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response. Upon request, letters regarding USP Class VI compliance can be provided.

Pebax® Clear 1200 resin combines a high transparency level with the excellent performance of Pebax® thermoplastic elastomer resin. Pebax® Clear 1200 resin is produced from a renewable source. The percentage of renewable carbon is 90% (calculated value, based on ASTM D6866).

PEBAX® fine powders are specialty Poly Ether Block Amide powders. PEBAX® ES Black 9002 UV is designed for coating metal parts, where high friction, noise reduction or very high flexibility are required. It can be applied by conventional electrostatic spraying process. Please consult Arkema literature for application method and recommendations.

Polyether block amide Pebax® MH 1657 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MH 1657 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate also offers excellent permeability to moisture vapor while remaining waterproof.

Polyether block amide Pebax® MH 2030 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MH 2030 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part. Refractive index according to an internal method is 1.508.

Polyether block amide Pebax® MV 1074 SA 01 MED resin is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide. Hydrophilic Pebax® MV 1074 SA 01 MED resin is suitable for extrusion or coextrusion and offers excellent high moisture absorption properties in wet environments, enhancing lubricity against bodily tissue. Pebax® MV 1074 SA 01 MED resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided. Refractive index according to an internal method is 1.502.

Polyether block amide Pebax® MV 1074 SA 01 resin is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide. Pebax® MV 1074 SA 01 resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof. This SA grade is specially designed to food uses. Refractive index according to an internal method is 1.502.

Polyether block amide Pebax® MV 1074 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MV 1074 SP 01 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof. This SP grade has been developed to be heat and UV resistant. Refractive index according to an internal method is 1.502.

Polyether block amide Pebax® MV 2080 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MV 2080 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity. Refractive index according to an internal method is 1.502.

Polyether block Pebax® MV 3000 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof. This SP grade is specifically designed for outdoor application that needs excellent weather resistance properties.

Polyether block Pebax® Rnew® 30R51 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. Pebax® Rnew® 30R51 SA 01 resin is an inherently antistatic polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This grade is particularly recommended for PMMA matrices. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof. The percentage of renewable carbon is 45% (calculated value, based on ASTM D6866). Refractive index according to an internal method is 1.49.

Polyether block Pebax® Rnew® 35R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon is 29% (calculated value, based on ASTM D6866).

Polyether block Pebax® Rnew® 40R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon is 45% (calculated value, based on ASTM D6866).

Pebax® Rnew® 55R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon measured according to ASTM D6866 is 62%.

Polyether block Pebax® Rnew® 63R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon measured according to ASTM D6866 is 77%.

Pebax® Rnew® 70R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon measured according to ASTM D6866 is 88%.

Polyether block Pebax® Rnew ® 72R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon is 90% (calculated value, based on ASTM D6866).

Polyether block Pebax® Rnew ® 80R53 SP 02 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon is 89% (calculated value, based on ASTM D6866).

ESTAMID® Care ME40 is free of plasticizers and heat and light stabilized. VESTAMID® Care ME40 is resistant to body fluids and toxicologically safe. VESTAMID® Care ME grades are flexible polyether block amides (PEBA) resins. The advantages at a glance - High flexibility & elasticity - High impact resistance - Excellent dimensional stability - High chemical resistance - Easy processability & colorability - Plasticizer-free - Gamma and EtO sterilization resistant - Tough and resilient - Low density Biocompatibility of VESTAMID® Care ME VESTAMID® Care ME grades were testeed on biocompatibility for applications within the body of up to 30 days contact time and comply with USP <88> class VI and ISO 10993 standards.

Care ME47 is resistant to body fluids and toxicologically safe. VESTAMID® Care ME grades are flexible polyether block amides (PEBA) resins. The advantages at a glance - High flexibility & elasticity - High impact resistance - Excellent dimensional stability - High chemical resistance - Easy processability & colorability - Plasticizer-free - Gamma and EtO sterilization resistant - Tough and resilient - Low density Biocompatibility of VESTAMID® Care ME VESTAMID® Care ME grades were tested on biocompatibility for applications within the body of up to 30 days contact time and comply with USP <88> class VI and ISO 10993 standards.

VESTAMID® Care ME55 is free of plasticizers and heat and light stabilized. VESTAMID® Care ME55 is resistant to body fluids and toxicologically safe. VESTAMID® Care ME grades are flexible polyether block amides (PEBA) resins. The advantages at a glance - High flexibility & elasticity - High impact resistance - Excellent dimensional stability - High chemical resistance - Easy processability & colorability - Plasticizer-free - Gamma and EtO sterilization resistant - Tough and resilient - Low density Biocompatibility of VESTAMID® Care ME VESTAMID® Care ME grades were tested on biocompatibility for applications within the body of up to 30 days contact time and comply with USP <88> class VI and ISO 10993 standards.

VESTAMID® Care ME62 is free of plasticizers and heat and light stabilized. VESTAMID® Care ME62 is resistant to body fluids and toxicologically safe. VESTAMID® Care ME grades are flexible polyether block amides (PEBA) resins. The advantages at a glance - High flexibility & elasticity - High impact resistance - Excellent dimensional stability - High chemical resistance - Easy processability & colorability - Plasticizer-free - Gamma and EtO sterilization resistant - Tough and resilient - Low density Biocompatibility of VESTAMID® Care ME VESTAMID® Care ME grades were tested on biocompatibility for applications within the body of up to 30 days contact time and comply with USP <88> class VI and ISO 10993 standards.

VESTAMID® Care ME71 is free of plasticizers and heat and light stabilized. VESTAMID® Care ME71 is resistant to body fluids and toxicologically safe. VESTAMID® Care ME grades are flexible polyether block amides (PEBA) resins. The advantages at a glance - High flexibility & elasticity - High impact resistance - Excellent dimensional stability - High chemical resistance - Easy processability & colorability - Plasticizer-free - Gamma and EtO sterilization resistant - Tough and resilient - Low density VESTAMID® Care ME VESTAMID® Care ME grades were tested on biocompatibility for applications within the body of up to 30 days contact time and comply with USP <88> class VI and ISO 10993 standards.