Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Filler / Reinforcement, Also Available In, Density / Specific Gravity, Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Flexural Strength at Break, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Instrumented Dart Impact, Multi-Axial Instrumented Impact Energy, Rockwell Hardness, Rockwell Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, DTUL (264 psi) - Annealed, DTUL (1.80 MPa) Annealed, Vicat Softening Temperature, Vicat Softening Temperature, CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Comparative Tracking Index, Hot-wire Ignition (HWI), Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Drying Temperature, Drying Time, Suggested Max Moisture, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Back Pressure, Screw Speed, Injection Notes