Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Density / Specific Gravity, Density, Density, Density, Apparent (Bulk) Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Spiral Flow, Mold Shrink, Linear-Flow, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption @ Equil, Water Absorption 23C/50RH, Environmental Stress-Cracking Resistance (ESCR), Carbon Black Content, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Nominal Tensile Strain at Break, Tensile Creep Modulus 1h, Tensile Creep Modulus 1000h, Apparent Bending Modulus, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Coefficient of Friction, Film Thickness - Tested, Film Puncture Resistance, Secant Modulus MD, Secant Modulus TD, Tensile Modulus, Tensile Strength at Yield MD, Tensile Strength at Yield TD, Tensile Stress at Yield, Tensile Strength at Break MD, Tensile Strength at Break TD, Tensile Strength, Tensile Stress at Break, Elongation at Yield MD, Elongation at Yield TD, Elongation at Break MD, Elongation at Break TD, Tensile Strain at Break, Tensile Strain at Yield, Dart Drop Impact, Dart Drop Impact, Elmendorf Tear Strength MD, Elmendorf Tear Strength TD, Elmendorf Tear Strength, Seal Initiation Temperature, Oxygen Transmission Rate, Water Vapor Transmission Rate, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact (Area), Notched Izod Impact Strength, Unnotched Izod Impact, Tensile Impact Strength, Tensile Impact Strength, Drop Impact Resistance, Impact Strength, Rockwell Hardness, Durometer Hardness, Shore Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Brittleness Temperature, Brittleness Temperature, Vicat Softening Temperature, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature (DSC), Melting Temperature, Melting Temperature, Melting Temperature, Peak Crystallization Temperature (DSC), Peak Crystallization Temperature (DSC), CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Specific Heat, Thermal Conductivity, Thermal Conductivity, Surface Resistivity, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Dielectric Constant, Dielectric Constant, Dielectric Constant, Dissipation Factor, Dissipation Factor, Dissipation Factor, Gloss, Haze, Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Back Pressure, Screw Speed, Injection Notes, Drying Temperature, Drying Time, Cylinder Zone 1 Temp., Cylinder Zone 2 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Cylinder Zone 5 Temp., Adapter Temperature, Melt Temperature, Die Temperature, Extrusion Notes