Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Density / Specific Gravity, Density, Density, Density, Apparent (Bulk) Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Spiral Flow, Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption @ Sat., Water Absorption Sat/23C, Water absorption, Water Absorption @ Equil, Water Absorption 23C/50RH, Humidity absorption, K-Value, Viscosity Number, Relative Viscosity, Tensile Modulus, Tensile Modulus, Tensile modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Yield stress, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Yield strain, Tensile Elongation at Break, Tensile Strain at Break, Nominal Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Flexural Strength at Break, Compressive Modulus, Compressive Strength, Compressive Stress, Shear Strength, Poisson's Ratio, Coefficient of Friction, Taber Abrasion Resistance, Deformation Under Load, Wear Factor, Film Thickness - Tested, Secant Modulus MD, Secant Modulus TD, Tensile Modulus, Tensile Strength at Yield MD, Tensile Stress at Yield, Tensile Strength at Break MD, Tensile Strength at Break TD, Tensile Stress at Break, Elongation at Break MD, Elongation at Break TD, Tensile Strain at Break, Tensile Strain at Yield, Elmendorf Tear Strength, Trouser Tear Resistance, Carbon Dioxide Transmission Rate, Nitrogen Transmission Rate, Oxygen Permeability, Oxygen Transmission Rate, Water Vapor Transmission Rate, Water Vapor Transmission Rate, Charpy Notched Impact Strength, Charpy notched impact strength (+23°C), Charpy notched impact strength (-30°C), Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact (Area), Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Multi-Axial Instrumented Impact Energy, Multi-Axial Instrumented Impact Peak Force, Rockwell Hardness, Rockwell Hardness, Durometer Hardness, Shore Hardness, Shore Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, Temp. of deflection under load (0.45 MPa), DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Temp. of deflection under load (1.80 MPa), DTUL (8.00 MPa) Unannealed, Continuous Use Temperature, Glass Transition Temperature, Vicat Softening Temperature, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature (DSC), Melting Temperature, Melting Temperature, Melting Temperature, CLTE, Flow, CLTE, Flow (TMA), Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Specific Heat, Thermal Conductivity, Thermal Conductivity, RTI Elec, RTI Imp, RTI Str, Surface Resistivity, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Dielectric Constant, Dielectric Constant, Relative Permittivity, Relative Permittivity, Dissipation Factor, Dissipation Factor, Dissipation Factor, Arc Resistance, Comparative Tracking Index (CTI), Comparative Tracking Index, Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Oxygen Index, Haze, Melt Density, Melt Viscosity, Melt Specific Heat, Melt Thermal Conductivity, Drying Temperature, Drying Time, Dew Point, Suggested Max Moisture, Suggested Shot Size, Suggested Max Regrind, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Holding Pressure, Back Pressure, Screw Speed, Cushion, Vent Depth, Injection Notes, Drying Temperature, Drying Time, Suggested Max Moisture, Cylinder Zone 1 Temp., Cylinder Zone 2 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Cylinder Zone 5 Temp., Melt Temperature, Die Temperature, Extrusion Notes