Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Filler / Reinforcement, Also Available In, Density / Specific Gravity, Density, Density, Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Spiral Flow, Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption @ Sat., Water Absorption Sat/23C, Water absorption, Water Absorption @ Equil, Water Absorption 23C/50RH, Humidity absorption, Viscosity Number, Viscosity number, Moisture Content, Tensile Modulus, Tensile Modulus, Tensile modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Stress at break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Strain at break, Tensile Creep Modulus 1000h, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Flexural Strength at Break, Compressive Strength, Compressive Stress, Shear Strength, Poisson's Ratio, Coefficient of Friction, Taber Abrasion Resistance, Wear Factor, Charpy Notched Impact Strength, Charpy notched impact strength (+23°C), Charpy notched impact strength (-30°C), Charpy Unnotched Impact Strength, Charpy impact strength (+23°C), Charpy impact strength (-30°C), Notched Izod Impact, Notched Izod Impact (Area), Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Instrumented Dart Impact, Multi-Axial Instrumented Impact Energy, Multi-Axial Instrumented Impact Peak Force, Rockwell Hardness, Rockwell Hardness, Shore Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, Temp. of deflection under load (0.45 MPa), DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Temp. of deflection under load (1.80 MPa), DTUL (8.00 MPa) Unannealed, Continuous Use Temperature, Glass Transition Temperature, Vicat Softening Temperature, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature (DSC), Melting Temperature, Melting Temperature, Melting Temperature, CLTE, Flow, CLTE, Flow (TMA), Coefficient of Linear Thermal Expansion, Flow, CLTE, Transverse, CLTE, Transverse (TMA), Coefficient of Linear Thermal Expansion, Transverse, Specific Heat, Thermal Conductivity, Thermal Conductivity, RTI Elec, RTI Imp, RTI Str, Surface Resistivity, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Dielectric Constant, Dielectric Constant, Relative Permittivity, Relative Permittivity, Dissipation Factor, Dissipation Factor, Dissipation factor (1 MHz), Dissipation Factor, Arc Resistance, Comparative Tracking Index (CTI), Comparative Tracking Index, Comparative tracking index, Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Oxygen Index, Melt Density, Melt Specific Heat, Melt Thermal Conductivity, Drying Temperature, Drying Time, Drying Time, Maximum, Dew Point, Suggested Max Moisture, Suggested Shot Size, Suggested Max Regrind, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Melt Temperature (Optimum), Mold Temperature, Injection Pressure, Holding Pressure, Back Pressure, Screw Speed, Cushion, Vent Depth, Injection Notes