Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Filler / Reinforcement, Also Available In, Density / Specific Gravity, Density, Apparent (Bulk) Density, Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption @ Sat., Water Absorption Sat/23C, Water Absorption 23C/50RH, Viscosity Number, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact (Area), Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Multi-Axial Instrumented Impact Energy, Multi-Axial Instrumented Impact Peak Force, Rockwell Hardness, Rockwell Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, DTUL (8.00 MPa) Unannealed, Continuous Use Temperature, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature (DSC), Melting Temperature, Melting Temperature, Melting Temperature, CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Thermal Conductivity, RTI Elec, RTI Imp, RTI Str, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Dielectric Constant, Dielectric Constant, Relative Permittivity, Dissipation Factor, Dissipation Factor, Comparative Tracking Index, Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Drying Temperature, Drying Time, Dew Point, Suggested Max Moisture, Suggested Max Regrind, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Holding Pressure, Back Pressure, Screw Speed, Injection Notes