Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Density / Specific Gravity, Density, Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Nominal Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Gardner Impact, Gardner Impact, Rockwell Hardness, Rockwell Hardness, Durometer Hardness, Shore Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Brittleness Temperature, Ductile / Brittle Transition Temperature, Vicat Softening Temperature, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature (DSC), Melting Temperature, Melting Temperature, CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, RTI Elec, RTI Imp, RTI Str, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Arc Resistance, Comparative Tracking Index, Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Oxygen Index, Gloss, Haze, Drying Temperature, Drying Time, Suggested Max Moisture, Suggested Max Regrind, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Holding Pressure, Back Pressure, Screw Speed, Clamp Tonnage, Cushion, Injection Notes, Drying Temperature, Drying Time, Suggested Max Moisture, Cylinder Zone 1 Temp., Cylinder Zone 2 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Cylinder Zone 5 Temp., Melt Temperature, Die Temperature, Extrusion Notes