Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Density / Specific Gravity, Density, Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Nominal Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Coefficient of Friction, Film Thickness - Tested, Secant Modulus MD, Secant Modulus TD, Tensile Modulus, Tensile Strength at Yield MD, Tensile Strength at Yield TD, Tensile Strength at Break MD, Tensile Strength at Break TD, Tensile Strength, Tensile Stress at Break, Elongation at Break MD, Elongation at Break TD, Tensile Strain at Break, Dart Drop Impact, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact (Area), Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Gardner Impact, Rockwell Hardness, Rockwell Hardness, Durometer Hardness, Shore Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (66 psi) - Annealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature (DSC), Melting Temperature, Melting Temperature, Melting Temperature, Peak Crystallization Temperature (DSC), CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Accelerated Oven Ageing, RTI Elec, RTI Imp, RTI Str, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Electric Strength, Dielectric Constant, Comparative Tracking Index, Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Oxygen Index, Gloss, Haze, Yellowness Index, Drying Temperature, Drying Time, Suggested Max Moisture, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Holding Pressure, Back Pressure, Screw Speed, Injection Notes, Drying Temperature, Drying Time, Hopper Temperature, Cylinder Zone 1 Temp., Cylinder Zone 2 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Cylinder Zone 5 Temp., Melt Temperature, Die Temperature, Extrusion Notes