Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Filler / Reinforcement, Density / Specific Gravity, Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Flexural Strength at Break, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Gardner Impact, Gardner Impact, Rockwell Hardness, Durometer Hardness, Shore Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Vicat Softening Temperature, Melting Temperature (DSC), Melting Temperature, Melting Temperature, CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Accelerated Oven Ageing, Surface Resistivity, Volume Resistivity, Electric Strength, Dissipation Factor, Comparative Tracking Index, Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Drying Temperature, Drying Time, Suggested Max Moisture, Suggested Max Regrind, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Holding Pressure, Back Pressure, Screw Speed, Cushion, Injection Notes