Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Density / Specific Gravity, Density, Apparent (Bulk) Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Mold Shrink, Linear-Flow, Water Absorption @ 24 hrs, K-Value, Viscosity Number (Reduced Viscosity), Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Compressive Modulus, Compressive Strength, Shear Strength, Poisson's Ratio, Tensile Stress at 100%, Tensile Strength, Tensile Strength at Yield, Elongation at Break, Tear Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact (Area), Notched Izod Impact Strength, Gardner Impact, Rockwell Hardness, Durometer Hardness, Shore Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, DTUL (264 psi) - Annealed, Continuous Use Temperature, Brittleness Temperature, Vicat Softening Temperature, Vicat Softening Temperature, Melting Temperature, CLTE, Flow, Change in Tensile Strength in Air, Change in Ultimate Elongation in Air, Volume Resistivity, Dielectric Strength, Dielectric Constant, Burning Rate, Oxygen Index, Oxygen Index, Light Transmittance, Haze, Drying Temperature, Drying Time, Rear Temperature, Middle Temperature, Front Temperature, Processing (Melt) Temp, Mold Temperature, Injection Notes, Hopper Temperature, Cylinder Zone 1 Temp., Cylinder Zone 2 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Cylinder Zone 5 Temp., Adapter Temperature, Melt Temperature, Die Temperature, Extrusion Notes