Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Density / Specific Gravity, Density, Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption Sat/23C, Water Absorption @ Equil, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Nominal Tensile Strain at Break, Tensile Creep Modulus 1h, Tensile Creep Modulus 1000h, Flexural Modulus, Flexural Modulus, Flexural Stress, Poisson's Ratio, Tensile Stress at Break, Tensile Strain at Break, Tear Strength, Tear Strength, Compression Set, Bayshore Resilience, Charpy Notched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Tensile Impact Strength, Durometer Hardness, Shore Hardness, Shore Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (1.80 MPa) Unannealed, Brittleness Temperature, Glass Transition Temperature, Glass Transition Temperature, Vicat Softening Temperature, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature (DSC), Melting Temperature, CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Surface Resistivity, Volume Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Dielectric Constant, Relative Permittivity, Dissipation Factor, Dissipation Factor, Comparative Tracking Index, Burning Rate, Oxygen Index, Melt Density, Melt Viscosity, Melt Specific Heat, Melt Thermal Conductivity, Drying Temperature, Drying Time, Suggested Max Moisture, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Notes, Drying Temperature, Drying Time, Suggested Max Moisture, Cylinder Zone 1 Temp., Cylinder Zone 2 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Adapter Temperature, Melt Temperature, Die Temperature, Extrusion Notes