Prospector

Hostaform® C 2521 XAP

Generic Family: Acetal (POM) Copolymer • Supplied by: Celanese Corporation
Low Emission
POM copolymer Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Ranges of applications: injection molding thick-walled, void-free molded parts extrusion e.g. for boards and pipes. Material is available in natural and black With reduced emissions: Emission according to VDA 275 < 10 mg/kg Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Monomers and additives are listed in EU-Regulation (EU) 10/2011 Hostaform® C 2521 XAP® natural is FDA compliant according to 21 CFR 177.2470 FDA = Food and Drug Administration (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
General Properties

Access the complete datasheet details for Hostaform® C 2521 XAP when you create your free account with Prospector. You’ll find complete information on physical, mechanical and hardness specs.

Material Status
Commercial: Active
Documents
description

Technical Datasheet

Download Document
Availability
Africa & Middle East, Asia Pacific, Europe, Latin America, North America
Uses
Blow Molding Applications
Processing Method
Blow Molding
Multi-Point Data
  • Creep Modulus vs. Time (ISO 11403)
  • Isochronous Stress vs. Strain (ISO 11403)
  • Isothermal Stress vs. Strain (ISO 11403)
  • Secant Modulus vs. Strain (ISO 11403)
  • Shear Modulus vs. Temperature, Dynamic (ISO 11403)
  • Shear Stress vs. Shear Rate (ISO 11403)
  • Viscosity vs. Shear Rate (ISO 11403)
Other Properties
Additive, Features, Forms, Density, Melt Volume-Flow Rate (MVR), Molding Shrinkage, Water Absorption Sat/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Stress at Yield, Tensile Strain at Yield, Nominal Tensile Strain at Break, Tensile Creep Modulus 1h, Tensile Creep Modulus 1000h, Flexural Modulus, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Ball Indentation Hardness, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Melting Temperature, Coefficient of Linear Thermal Expansion, Flow, Surface Resistivity, Volume Resistivity, Electric Strength, Relative Permittivity, Dissipation Factor, Comparative Tracking Index (CTI), Flame Rating, Melt Density, Melt Specific Heat, Melt Thermal Conductivity, Ejection Temperature, Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Rate, Back Pressure
Access 46 properties in Plastics. Create your free account or sign into Prospector.
Processing

Find specific processing information for Hostaform® POM as well as general information for the Acetal (POM) Copolymer generic family. Register or Sign In for more information.

Where To Buy

You can purchase Hostaform® C 2521 XAP from 6 distributors or manufacturers. Register or Sign In for more information.

Prospector Sign in / Register
Premium Features
Find UL Yellow Cards
UL Yellow Cards

UL's Yellow Cards are a globally recognized safety and quality guarantee, a certified demonstration of how plastics have met a specific set of performance credentials.

Find UL Yellow Cards

PROSPECTOR

Find solutions, not just materials.

When you join Prospector, you leverage the dynamic tools and features to find solutions fast.

Register Today