Commercial: Active

description

Technical Datasheet (English)

Download Document

Asia Pacific, Europe, North America

Injection Molding

Additive, Features, RoHS Compliance, Density / Specific Gravity, Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Water Absorption @ Sat., Water Absorption Sat/23C, Water Absorption @ Equil, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Rockwell Hardness, Shore Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Vicat Softening Temperature, Melting Temperature, Melting Temperature, CLTE, Flow (TMA), CLTE, Transverse (TMA), Surface Resistivity, Volume Resistivity, Dielectric Strength, Dielectric Constant, Dissipation Factor, Drying Temperature, Drying Time, Suggested Max Moisture, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Back Pressure, Screw Speed