ADMER® AT1179E is a maleic anhydride grafted PP-based adhesive especially designed for bi-oriented PP-structures with EVOH or PA.

ADMER® AT1404E is an maleic anhydride grafted, co-PP based tie resin, suitable for high performance coating and extrusion applications such a pipes and injection molding. It offers strong adhesion to PA, EVOH and Aluminum.

ADMER® AT2717E is a maleic anhydride grafted, PP-based grade with high bonding to PP, EVOH and PA, especially designed for blown and cast film structures with antifog additives*. *materiaI was tested with Constab AF0042PP antifog grade.

ADMER™ AT2747E is a maleic anhydride grafted PP based adhesive for 3-layer steel pipe coating. It is designed for strong bonding between PP and epoxy materials.

ADMER™ AT2867E is a maleic anhydride grafted, PP-based adhesive designed for bonding between polypropylene and EVOH or PA. It offers advanced viscoelasticity and is especially designed for triple bubble processes.

ADMER™ AT2937 is an Imine modified Polypropylene-based adhesive resin. It offers bonding to PP, PA and POK.

ADMER™ AT3177E is a maleic anhydride grafted PP-based adhesive especially designed for vacuum metallized cast PP and oriented PP (VM-CPP & VM-BOPP). It offers enhanced bonding to metallization layers while maintaining a high surface gloss.

ADMER® QB510E is a maleic anhydride grafted, homo-PP based standard adhesive for bottles, sheets and films composed of Polypropylene and EVOH or PA.

ADMER® QB520E is a maleic anhydride grafted, homo-PP based adhesive resin with a lower MFR for bottles, sheets, blown film and pipes composed of PP with EVOH or PA.

ADMER® QF300E is a maleic anhydride grafted, homo-PP based adhesive resin with a good processability in cast film application with PP and PA.

ADMER® QF460E is a maleic anhydride grafted, co-PP based tie resin, especially designed for multilayer pipes combining PP or PB with Aluminum, EVOH or PA.

ADMER® QF541E is a maleic anhydride grafted, co-PP -based adhesive designed for coextrusion film applications with Aluminum, PA and EVOH.

ADMER® QF551E is a maleic anhydride grafted, co-PP based grade for strong bonding between PP and EVOH, PA or Aluminum, and is therefore suitable for high performance applications in blown film, composite pipe, injection molding or coating process.

ADMER™ QF825E is a PP-based adhesive designed for aluminum coating application.

ADMER™ QF829E is a maleic anhydride grafted, co-PP-based grade designed for retort products. It shows high adhesion and good processability in co-extrusion coating application between PP and EVOH, PA, Aluminum or Paper.

EPOLENE® E-43 is a chemically modified polypropylene used as a coupling agent for polypropylene composites and for providing slip resistance in floor finish emulsions. Because of the polarity and anhydride functionality, EPOLENE® E-43 polymer is useful for laminating, as a compatibilizer for PP blends with nylon or EVOH, and for enhancing the strength of composites that utilize reinforcements / fillers such as glass, talc, and calcium carbonate. Attributes: - Coupling agent and compatibilizer for PP composites - Excellent pigment dispersion aid - Provides slip resistance in floor polish - Maleic anhydride grafted polypropylene (PP) - High level of functionality Applications: - Compounding - Emulsions - Hot melt adhesives

EPOLENE® E-43P is a chemically modified polypropylene used as a coupling agent for polypropylene composites and for providing slip resistance in floor finish emulsions. Because of the polarity and anhydride functionality, EPOLENE® E-43P polymer is useful for laminating, as a compatibilizer for PP blends with nylon or EVOH, and for enhancing the strength of composites that utilize reinforcements / fillers such as glass, talc, calcium carbonate, and metals. Attributes: - Powdered Product Form - Coupling agent and compatibilizer for PP composites - Excellent pigment dispersion aid - Provides slip resistance in floor polish - Maleic anhydride grafted polypropylene (PP) - High level of functionality Applications: - Compounding - Emulsions - Hot melt adhesives

This data represents typical values that have been calculated from all products classified as: Generic MAH-g-PP This information is provided for comparative purposes only.

LINXIDAN® LX4435 is a maleic anhydride grafted PP suggested for use as a coupling agent in PP composites. It enhances physical and thermal properties, including but not limited to: flexural modulus, flexural strength, tensile strength, and reduction of water absorption. Applications include Glass and Mineral Filled Compounds and Wood Plastic Composites.

Description: TECNOBOND PP/C is a polypropylene functionalized by maleic anhydride through a new process of high grafting efficiency. Applications: TECNOBOND PP/C is used as a coupling agent to improve the adhesion between long glass fibres and polypropylene because of its good dispersion in the polypropylene matrix and high reactivity with functional groups. TECNOBOND PP/CI is also recommended to compatibilize polypropylene with wood ( WPC) .

Description: TECNOBOND PP is a polypropylene functionalized by maleic anhydride through a new process of high graftrng efficiency. Applications: TECNOBOND PP, because of its good dispersion in the polypropylene matrix and high reactivity with functionalgroups, is used as a coupling agent to improve the adhesion between short glass fibres and polypropylene as a dispersant agent in compounds of polypropylene and mineral fillers (talc, calcium carbonate, etc.) . TECNOBOND PP is recommended to compatibilize polypropylene and polyamide alloys and improves the adhesion properties of polypropylene to metal in plastic coatings as well as in tie layers for film applications.

Description: TECNOBOND PP-TLA is a random-block polypropylene copolymer modified by maleic anhydride through a new continuous process with high grafting efficiency which guarantees a very low content of free maleic anhydride. Applications: TECNOBOND PP-TLA is particularly recommended as tie-layer adhesive in the co-extrusion processes, meltphase thermoforming, cast or blowing film or sheet. TECNOBOND PP-TLA provides outstanding adhesion in the rigid packaging between non—polar layers as PP and polar barrier materials as EVOH or PA. In barrier co-extrusion covalent bonds are formed at TECNOBOND PP-TLA interface with EVOH or PA while entanglements are in melt phase of PP and TECNOBOND PP-TLA.