ADMER® AT1707E is an maleic anhydride grafted tie resin based on PE-LLD for multilayer high-speed PE-cast film and structures with PA, EVOH or Aluminum.

ADMER™ AT1870E is a MDPE-based adhesive resin designed for injection molding processing. It offers advanced adhesion durability and good processability for PE and PA.

ADMER™ AT1955E is a maleic anhydride grafted, elastomer-based adhesive designed for cast, sheet and blown film, blow molding, double- and triple-bubble-process. This grade shows high bonding not only to PET, but also to EVOH, PA, PE and PP.

ADMER® AT2138E is an maleic anhydride grafted, PE- based adhesive designed for doubIe- and tripIe- bubble process. It shows high adhesion to PE, PA, EVOH and PET.

ADMER® AT2235E is a maleic anhydride grafted concentrate grade based on PE-LLD. Used with a sufficient blending ratio, it offers strong adhesion performance in film applications between PE and PA or EVOH and also in Wood Plastic Composites.

ADMER™ AT2397E is designed for multilayer pipes composed of polyethylene (PEx, PE-RT) and aluminum. It offers advanced adhesion durability, high heat resistance and good processability for PE and PA.

ADMER™ AT2490E is a maleic anhydride grafted grade based on PE-LLD. It is dedicated to be used as a coupling agent. Added to base polymer it improves the mechanical properties of flame-retarded wire & cable compounds, glass fiber compound and especially wood plastic compounds (WPC).

ADMER® AT2539E is a maleic anhydride grafted MD-PE based adhesive designed for bonding to PE, EVOH, PA, Epoxy and metals. It offers advanced adhesion durability, high heat resistance and good processability in pipe coating, blow film and blow molding.

ADMER™ AT2614E is a maleic anhydride grafted PE- based adhesive designed for double- and triple- bubble process. It shows high adhesion to PE, PA, EVOH, PP, PC and PET.

ADMER™ AT2749E is a maleic anhydride grafted MDPE based adhesive for 3-layer steel pipe coating. It is designed for strong bonding between PE and epoxy materials.

ADMER™ AT2831E is a PE-based adhesive for 3-layer steel pipe coating with a strong adhesion between PE and epoxy materials.

ADMER™ AT3158E is a PE-based adhesive for 3-layer steel pipe coating with a strong adhesion between PE and epoxy materials.

ADMER® GT6E is a maleic anhydride grafted, LLDPE-based adhesive designed for multilayer plastic fuel tanks (PFT) composed of PE, PA and EVOH. It offers advanced adhesion durability, fuel resistance and processability.

ADMER® GT7 is a maleic anhydride grafted, LLDPE-based adhesive designed for multilayer plastic fuel tanks (PFT) composed of PE, PA and EVOH. It offers advanced adhesion durability, fuel resistance and processability.

ADMER® L2100 is a maleic anhydride grafted LLDPE-based resin, designed for blow molding PE-applications with EVOH or PA. It offers advanced adhesion durability and good processability.

ADMER® NE062E is an maleic anhydride grafted, PE-based adhesive designed for multilayer plastic pipes composed of PE, PEX, PE-RT and Aluminum. It offers advanced adhesion durability, high heat resistance and good processabiIity.

ADMER™ NF358E is a maleic anhydride grafted, PE-LLD-based tie resin developed for multilayer film applications composed of PE, PA, EVOH or Aluminum. This grade can be blended with PE-LD, PE-LLD, PE-HD and EVA. Its superior adhesion performance and high transparency makes it the perfect choice for multilayer barrier films. Incorporating our advanced anhydride grafting technology, this grade has very low unreacted acid content, while maintaining the equivalent thermal stability of ordinary PE-LLD. The adhesion strength of NF358E can be adjusted by changing of the blend ratio in the range of 20% to 40%.

ADMER® NF377E is an maleic anhydride grafted, PE-LLD-based adhesive designed for PE-cast film structures with PA and EVOH.

ADMER® NF408E is a maleic anhydride grafted, PE-based adhesive resin designed for adhesion to PA or EVOH in bottle, sheet and blow film applications.

ADMER® NF410E is a maleic anhydride grafted, PE-LLD-based adhesive resin designed for multilayer pipes composed of PE, PEX or PE-RT with EVOH, PA or Aluminum. It offers advanced adhesion durability and good processability.

ADMER® NF448E is a maleic anhydride grafted, LLDPE-based tie resin designed for blow molding applications (Bottle, IBC) composed of PE and EVOH or PA.

ADMER® NF468E is a maleic anhydride grafted, PE-LLD-based tie resin, designed for multilayer pipes composed of PE, PEX or PE-RT with EVOH, PA or Aluminum. It offers advanced adhesion durability and good processability.

ADMER® NF478E is a maleic anhydride grafted LLDPE-based grade, designed for adhesion to Polyamide in blown and cast film applications.

ADMER® NF498E is an maleic anhydride grafted LLDPE-based grade, which is designed for adhesion to Polyamide or EVOH in tubes, sheet, blown and cast film application.

ADMER® NF518E is a maleic anhydride grafted, LLDPE-based grade, which is designed for adhesion between PE and PA or EVOH in tube, sheet, blown and cast film and especially double-bubble applications.

ADMER® NF528E is a maleic anhydride grafted PE-based grade, which is designed for adhesion between PE and PA or EVOH in blown and cast film and especially double-bubble applications.

ADMER™ NF530E is a maleic anhydride grafted LLDPE based adhesive designed as well for multilayer pipe composed of PE, PE-x, PE-RT and Aluminum as for PE-cast film and sheet with Polyamide or EVOH.

ADMER™ NF642E is a maleic anhydride grafted, LLDPE-based adhesive concentrate. Used with a sufficient blending ratio, it offers strong adhesion performance between PE and PA or EVOH in multilayer blown & cast film, sheets and bottle applications.

ADMER® NF837E is a maleic anhydride grafted, PE-LLD-based grade, which is especially designed for high-speed extrusion coating application. lt offers strong adhesion to EVOH, PA, Paper and Aluminum.

ADMER® NF911E is a maleic anhydride grafted, Plastomer-based grade, designed for adhesion to PET, PP, EVOH, PA and PE in high performance processes such as cast and blown film, doubIe- and tripIe- bubble applications.

ADMER™ NF927E is a maleic anhydride grafted PE- based adhesive designed for double- and triple- bubble process. It shows high adhesion to PE, PA, EVOH, PP, PC and PET.

ADMER™ SF730E is a maleic anhydride grafted, elastomer-based adhesive, creating a strong bonding to PET, PE, PC, EVOH, PA and others in high-performance multilayer structures, especially in double- and triple-bubble application.

EPOLENE® C-16 is a branched low-density polyethylene modified with maleic anhydride. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and applications requiring compatibility with polyamide. Coatings produced with EPOLENE® C-16 polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat-seal ability. In hot melt adhesives, the maleic anhydride modification allows for improved adhesion, greater filler tolerance, and broader adhesive capabilities. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Maleic anhydride grafted PE provides functionality/adhesion to substrate Applications: - Automotive carpet backing - Compounding - Hot melt adhesives - Wax modification

EPOLENE® C-16P is a branched low-density polyethylene modified with maleic anhydride. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and applications requiring compatibility with polyamide. Coatings produced with EPOLENE® C-16P polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat-seal ability. In hot melt adhesives, the maleic anhydride modification allows for improved adhesion, greater filler tolerance, and broader adhesive capabilities. Attributes: - Powdered Product Form - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Maleic anhydride grafted PE provides functionality/adhesion to substrate Applications: - Automotive carpet backing - Compounding - Hot melt adhesives - Wax modification

EPOLENE ® C-18 is a branched low density polyethylene modified with maleic anhydride. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and applications requiring compatibility with polyamide. Coatings produced with EPOLENE ® C-18 polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat-seal ability. In hot melt adhesives, the maleic anhydride modification allows for improved adhesion, greater filler tolerance, broader capabilities, and improved aging properties. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Maleic anhydride grafted PE provides functionality/adhesion to substraites - Useful in color concentrates Applications: - Automotive - Compounding - Hot Melt Adhesives - Packaging - Wax Modification

EPOLENE ® C-26 is a maleic anhydride grafted polyethylene coupling agent for polyolefin (PE, PP etc.) composites. The polar functionality and molecular weight are optimized to provide balanced attraction between polyolefin and reinforcements / fillers like glass, wood, minerals, and metals. EPOLENE ® C-26 polymers are products of Westlake Chemical Corporation and are protected under one or more of the following U.S. patents: 5,955,547 and 6,046,279; and their foreign equivalents. Attributes: - Balances attraction between polar filler / reinforcements and non-polar polymers - Coupling agent for PE composites - Maleic anhydride grafted polyethylene (PE) Applications: - Automotive - Building and construction - Rubber and plastic modification - Compounding

This data represents typical values that have been calculated from all products classified as: Generic MAH-g-PE This information is provided for comparative purposes only.

ReZilok Rx 101 tie-layer resin is a maleic anhydride grafted linear low density polyethylene. This tie-layer resin is used to bond dissimilar materials in coextrusion or reflow processes. ReZilok Rx 101 is optimized for adhesion to a variety of materials through chemical and physical bonding mechanisms. Regulatory Status ReZilok Rx 101 is not considered to have cytotoxic potential according to ISO 10993-5 test results. ReZilok Rx 101 is supported for use in disposable devices classified by the FDA as Class I & Class II.

Description: TECNOBOND CEL is a blend of ethylene semicrystalline copolymers modified by maleic anhydride through a new process of high grafting efficiency which guarantees a very low content of free maleic anhydride and the absence of any cross-linked material. Applications: TECNOBOND CEL is particularly recommended for the production of halogen free flame retardant compounds for wires and cables where high flexibility is required and when fillers such as magnesium hydroxide and aluminium trihydroxide are used. TECNOBOND CEL is used as a coupling agent in many compounds of polyolefin polymers and high content of inorganic fillers such as magnesium, calcium carbonate, talc, kaolin etc.

Description: TECNOBOND CFA-S is a LLDPE modified by maleic anhydride through a new continuous process of high grafting efficiency which guarantees a very low content of free maleic anhydride and the absence ofcross-linked material. Applications: TECNOBOND CFA-S is particularly recommended for the production of halogen-free flame retardant compoundsfor wires and cables where high stiffness is required and when fillers as magnesium hydroxide and aluminium trihydroxide are used. TECNOBOND CFA-S is used as coupling agent in many compounds between polyolefin polymers and high content of inorganic fillers as magnesium and calcium carbonate, talc and kaolin etc. TECNOBOND CFA-S is also recommended to compatibilize polyethylene with wood (WPC).