Extrusion grade targeted for shapes free of center porosity. Hostaform® M25AE is a special grade of acetal copolymer targeted for extrusion shapes (rod, bar, plate, etc.) free of center porosity in large diameters and thicknesses. Chemical abbreviation according to ISO 1043-1: POM

special grade for calendering Hostaform® M25IE is a special grade of acetal copolymer targeted for calendering.It provides sheets with a high gloss and smooth surface. Chemical abbreviation according to ISO 1043-1: POM

Hostaform® M30RS is an acetal copolymer targeted for extrusion shapes (rod, bar, plate, etc.) free of center porosity in large diameters and thicknesses with improved processing. Chemical abbreviation according to ISO 1043-1: POM. ECO-B: Hostaform® ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Hostaform® M30RS is an acetal copolymer targeted for extrusion shapes (rod, bar, plate, etc.) free of center porosity in large diameters and thicknesses with improved processing. Chemical abbreviation according to ISO 1043-1: POM.

Low emission grade based on Celcon M90™ for interior automotive Hostaform® acetal copolymer grade M90XAP® is a low emission version, medium viscosity polymer providing optimum performance in general purpose injection molding primarily for the interior automotive market. This grade provides overall excellent performance in many applications.

Media resistant - intermittent exposure to acidic cleaners Hostaform® acetal copolymer grade MR130ACS is a general purpose acetal with improved acid stabilization. Hostaform® MR130ACS demonstrates improved performance over standard acetals after intermittent exposure to acidic cleaners.

POM, Media Resistant Hostaform® MR130AR is an acetal copolymer. This material is modified to have delayed deterioration against highly acidic solutions, including automotive wheel cleaner solutions. It may have a longer delay of deterioration against acidic solutions compared with Hostaform® MR130ACS. In natural form, this material has a tan to yellow hue.

Media resistant - bleach, high modulus grade Hostaform® MR130HPB acetal copolymer is a high modulus, improved toughness grade based on our Hostaform® C 13031, product but specially formulated with improved resistance to intermittent bleach exposure.

Tribological modified Hostaform® MT® SlideX® 1203 is a standard flow injection molding grade with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform®Â MT® SlideX®Â 1203 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Tribological modified Hostaform® MT® SlideX®Â 2404 is a low melt viscosity injection molding grade for fast cycling and thin walled parts with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform®Â MT® SlideX® 2404 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Tribological modified Hostaform® MT® SlideX®Â 2404 is a low melt viscosity injection molding grade for fast cycling and thin walled parts with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform®Â MT® SlideX® 2404 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Improved flow and slip grade for medical technology applications Hostaform® MT®12R01 ECO-B is a low melt viscosity and improved slip grade for fast cycling, thin walled injection molding. Hostaform®Â MT®12R01 ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Improved flow and slip grade for medical technology applications Hostaform® MT®12R01 is a low melt viscosity and improved slip grade for fast cycling, thin walled injection molding. Hostaform®Â MT®12R01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Improved flow grade with optimum properties for medical technology applications Hostaform® MT®12U01 is a moderately high flow grade for faster cycling and thin walled injection molding. Hostaform®Â MT®12U01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Improved flow grade with optimum properties for medical technology applications Hostaform® MT®12U01 is a moderately high flow grade for faster cycling and thin walled injection molding. Hostaform®Â MT®12U01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents

Improved flow grade with optimum properties and higher stiffness for medical technology applications Hostaform® MT®12U03 ECO-B is a moderately high flow grade for faster cycling and thin walled injection molding with improved stiffness and hardness compared to Hostaform® MT®12U01. Hostaform®Â MT®12U03 ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Improved flow grade with optimum properties and higher stiffness for medical technology applications Hostaform® MT®12U03 is a moderately high flow grade for faster cycling and thin walled injection molding with improved stiffness and hardness compared to Hostaform® MT®12U01. Hostaform®Â MT®12U03 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Low level PTFE filled product with high flow for use in medical technology applications Hostaform® MT®24F01 is a low level polytetraflouroethylene filled (PTFE) product designed for use in wear applications against plastics, metal, glass or ceramic mating surfaces where silicone lubricants can not be tolerated. Hostaform®Â MT®24F01is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

High flow, low melt viscosity, fast cycling grade for medical technology applications Hostaform® MT®24U01 ECO-B is a low melt viscosity for fast cycling, thin walled injection molding. Hostaform®Â MT®24U01 ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

High flow, low melt viscosity, fast cycling grade for medical technology applications Hostaform® MT®24U01 is a low melt viscosity for fast cycling, thin walled injection molding. Hostaform® MT®24U01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents

High molecular weigth grade for extrusion and injection molding for health care market Hostaform® acetal copolymer grade MT®2U01 is a special grade developed for medical industry applications containing low residual monomers and no animal products. Hostaform® MT®2U01 is a low melt flow injection molding and extrusion grade designed for good processing along with optimum properties including improved toughness in demanding applications.

Hostaform® acetal copolymer grade MT®2U06 is a high molecular weight and low flow grade primarily used for extrusion and select injection molding. Hostaform® MT®2U06 is a special grade developed for medical industry applications and in accordance to GMP principles. US FDA Device Master file listing is available for all colors and certified biocompatibility data (USP Class VI and ISO 10993) are available for select colors.

Low level PTFE filled with good flow for medical technology applications Hostaform® MT®8F01 is a standard flow low level polytetraflouroethylene filled (PTFE) product designed for use in wear applications against plastics, metal, glass or ceramic mating surfaces where silicone lubricants can not be tolerated. Hostaform®Â MT®8F01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Low level PTFE filled with good flow for medical technology applications Hostaform® MT®8F01 is a standard flow low level polytetraflouroethylene filled (PTFE) product designed for use in wear applications against plastics, metal, glass or ceramic mating surfaces where silicone lubricants can not be tolerated. Hostaform®Â MT®8F01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Improved slip grade with good flow for medical technology applications. Hostaform® MT®8R02 is an improved wear performance grade targeted at injection molding grade with a molecular weight for excellent moldability and optimum properties in demanding applications. Hostaform®Â MT®8R02 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Standard grade with good flow with optimum properties for healthcare market Hostaform® MT®8U01 ECO-B is an injection molding grade with a molecular weight for excellent moldability and optimum properties in demanding applications. Hostaform® MT®8U01 ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Standard grade with good flow with optimum properties for healthcare market Hostaform® MT®8U01 is an injection molding grade with a molecular weight for excellent moldability and optimum properties in demanding applications. Hostaform® MT®8U01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

UV detectable grade with good flow for medical technology applications Hostaform® MT®8U05 is an injection molding grade with a molecular weight for excellent moldability and optimum properties in demanding applications. The material can be identified by UV detectors. Hostaform®Â MT®8U05 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

UV detectable grade with good flow for medical technology applications Hostaform® MT®8U05 is an injection molding grade with a molecular weight for excellent moldability and optimum properties in demanding applications. The material can be identified by UV detectors. Hostaform®Â MT®8U05 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Hostaform® POM RF 2162 is an impact modified acetal copolymer that has been specially designed for Rotomolding. The material is UV stabilized and is available in precolored black or natural. Hostaform® POM RF 2162 has low fuel permeation and meets CARB and EPA regulations as a single layer solution.

Hostaform® POM RF2464 is an impact modified acetal copolymer that has been specially designed for Rotomolding. The material is UV stabilized and is available in natural or can be supplied in a pre-colored black. Hostaform® POM RF2464 has excellent toughness balanced wtih low fuel permeation and meets EPA and CARB regulations as a single layer solution in fuel tanks.

Easy flowing elastomer-containing injection molding grade, moderate toughness Chemical abbreviation according to ISO 1043-1: POM-HI, Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing elastomer-containing injection molding type based on HOSTAFORM® C 27021; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with higher energy-absorbing capacity UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA). ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Easy flowing elastomer-containing injection molding grade; moderate toughness Chemical abbreviation according to ISO 1043-1: POM-HI, Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing elastomer-containing injection molding type based on HOSTAFORM® C 27021; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with higher energy-absorbing capacity UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)

Impact modified, low emission Polyacetal copolymer, impact modified Easy flowing, elastomer-containing injection molding type based on HOSTAFORM® C 27021 with high toughness and reduced emissions HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for more than 1 mm thickness. Emission according to VDA 275

Easy flowing; elastomer-containing injection molding grade; high toughness Chemical abbreviation according to ISO 1043-1: POM-HI Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing, elastomer-containing injection molding type based on HOSTAFORM® C 27021 with high toughness, and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with high energy-absorbing capacity. UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)

Easy flowing; elastomer-containing injection molding grade; black; weathering resistant Chemical abbreviation according to ISO 1043-1: POM-HI Molding compound ISO 29988- POM-K, M-GCLP, 05-001 Modified POM copolymer Easy flowing, elastomer-containing injection molding type in color modifying black 10/1570; especially weathering resistant; lower chemical resistance than the basic type HOSTAFORM® C 27021; high resistance to thermal and oxidative degradation. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: for molded parts with matt surface. FMVSS = Federal Motor Vehicle Safety Standard (USA)

Impact modified, low emission Easy flow, impact modified injection molding grade, with good low temperature impact strength and good weld line strength and reduced emissions. Emission according to VDA 275 < 5 mg/kg

Impact Modified, low Emission Easy flow, high impact modified injection molding grade, with good low temperature impact strength and good weld line strength and reduced emissions. Emission according to VDA 275 < 5 mg/kg Preliminary data sheet

Impact modified, low emission POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Preliminary Datasheet ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Impact modified, UV stabilized POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Preliminary Datasheet for natural and colored grades