Electroconductive fuel resistant Hostaform® acetal copolymer grade EC141SXF 10/9022 is a conductive grade modified to resist deterioration from aggressive fuel blends. Hostaform® EC141SXF 10/9022 has been developed to dissipate static electricity from fuel handling systems. Hostaform® EC141SXF 10/9022 has been specially formulated for laser welding applications. Please note Hostaform® EC141SXF 10/9022 has special processing considerations to ensure static dissipation properties. Use minimum back pressure and slowest screw speed possible in retracting screw during cooling portion of cycle. Large gate size (>2 mm) recommended. Pneumatic conveying of material long distances is not recommended.

Electroconductive, impact modified

acetal color masterbatch/concentrate Hostaform® FK color masterbatches (color concentrates) are for use with other acetal products based in Celanese's acetal copolymer. Hostaform® FK color masterbatches are specially designed to provided color to other Celcon® and Hostaform® grades with minimal affect on performance properties. It is not meant to be molded as a stand alone product. FDA compliant Hostaform® FK color masterbatches are available in specific colors. Please contact Celanese for details.

acetal color masterbatch/concentrate Hostaform® FK color masterbatches (color concentrates) are for use with other acetal products based in Celanese's acetal copolymer. Hostaform® FK color masterbatches are specially designed to provided color to other Celcon® and Hostaform® grades with minimal affect on performance properties. It is not meant to be molded as a stand alone product. FDA compliant Hostaform® FK color masterbatches are available in specific colors. Please contact Celanese for details.

laser markable, low gloss, good flow Hostaform® acetal copolymer grade LM140LG is a laser markable specialty grade of acetal copolymer formulated to provide good flow with a low gloss finish. Preliminary Data Sheet

Laser markable polyacetalcopolymer easy flow injection molding grade with reduced emissions especially for automotive interior application. With Improved UV resistance. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness). Emission according to VDA 275 < 5 mg/kg. Â Preliminary Datasheet

Laser markable, standard grade Hostaform® LM90 is a nominal 9 melt flow rate acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform® LM90 can be laser marked with barcodes, identification numbers, designs, 2-D symbology, etc.

reduced gloss, low emission, UV resistant grade Hostaform® acetal copolymer grade LU-02 XAP® is UV stabilized material displaying a reduced gloss over standard UV acetal grades similar to LU-02. However, Hostaform® LU-02XAP® has lower volatile emissions as required for some automotive interiors.

slip improved M15HP Hostaform® LW15EWX is a specialty low wear grade of acetal copolymer designed for improved performance including when paired against other thermoplastic resins (PBT, PA, PC, PMMA) or steel. Due to the special wax blend the material has a good weld line strength. Compared to Hostaform® LW90EWX, this grade has higher toughness and strength.

low wear, including for POM/POM pairings, contains silicone oil Hostaform® LW90BSX is a specialty low wear grade of acetal copolymer designed for a wide range of tribological applications, including POM/POM pairings. This grade's low wear system includes silicone oil.

low wear grade for wear against other thermoplastics Hostaform® LW90EWX is a specialty low wear grade of acetal copolymer designed for improved performance including when paired against other thermoplastic resins (PBT, PA, PC, PMMA) or steel. Due to the special wax blend the material has a good weld line strength.

improved flow general purpose unfilled molded in metallic appearance Hostaform® LX270 specialty metallic appearance grades are an integrally colored nominal 27 melt flow rate based acetal copolymer material formulated to provide an exceptional molded in metallic appearance. This product is available in many metallic molded-in-colors. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application.

Hostaform® acetal copolymer grade LX270Z XAP®2 is a UV stabilized material available in a range of molded in metallic colors generally for automotive interior applications and is a higher flow grade than LX90Z. In addition, Hostaform® LX270Z XAP®2 has lower volatile emissions as required for some automotive interiors. Flow properties of this grade is based upon the standard acetal acetal copolymer and flow testing does not reflect how it actually flows. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application.

general purpose unfilled molded in metallic appearance Hostaform® LX90 specialty metallic appearance grades are an integrally colored nominal 9 melt flow rate based acetal copolymer material formulated to provide an exceptional molded in metallic appearance. This product is available in many metallic molded-in-colors. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application.

fiber glass coupled grade with molded in metallic appearance Hostaform® LX90GC15 is a specialty metallic appearance acetal copolymer grade that is integrally colored and has a nominal 15% fiber glass loading. This grade provides additional strength and stiffness over unfilled acetal grades while presenting a metal appearance surface. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application. Chemical abbreviation according to ISO 1043-1: POM

Specialty metallic appearance UV resistant grade for interior automotive Hostaform® LX90Z specialty metallic appearance grades are an integrally colored nominal 9 melt flow rate based acetal copolymer material stabilized for use where ultraviolet radiation exposure is to be encountered. The material is formulated to prevent discoloration, fading, chalking and mechanical property change in severe ultraviolet exposure. This product, formerly called Celcon® UV90Z metallics, is available in many molded-in-color metallic colors formulated for the interior automotive market and other applications. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application.  ECO-B: Hostaform® ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Low emission, UV resistant grade, Metallic colors Hostaform® acetal copolymer grade LX90Z XAP®2 is UV stabilized material available in a range of molded in metallic colors generally for automotive interior applications. In addition, Hostaform® LX90Z XAP®2 has lower volatile emissions as required for some automotive interiors. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application. Low Emission Performance [VDA-275] < 5 PPM ECO-B: Hostaform® ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Low emission, UV resistant grade, Metallic colors Hostaform® acetal copolymer grade LX90Z XAP®2 is UV stabilized material available in a range of molded in metallic colors generally for automotive interior applications. In addition, Hostaform® LX90Z XAP®2 has lower volatile emissions as required for some automotive interiors. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application. Low Emission Performance [VDA-275]

Specialty metallic appearance UV resistant grade for interior automotive Hostaform® LX90Z specialty metallic appearance grades are an integrally colored nominal 9 melt flow rate based acetal copolymer material stabilized for use where ultraviolet radiation exposure is to be encountered. The material is formulated to prevent discoloration, fading, chalking and mechanical property change in severe ultraviolet exposure. This product, formerly called Celcon® UV90Z metallics, is available in many molded-in-color metallic colors formulated for the interior automotive market and other applications. Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Celanese Technical Service for assistance with your application.

High melt strength POM copolymer Stiff-flowing type with high melt strength; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For extrusion blow molding, and for injection molding thick-walled, void-free molded parts.

Low Emission Hostaform® acetal copolymer grade M15HP XAP® is a high viscosity polymer providing optimum performance in general purpose injection molding. This grade provides overall excellent performance in applications requiring high stiffness. Emission according to VDA 275 < 10 mg/kg

Low flow, high strength and stiffness, improved impact Hostaform® acetal copolymer grade M15HP is a high viscosity polymer providing optimum performance in general purpose injection molding. This grade provides overall excellent performance in applications requiring high stiffness.

Hostaform® acetal copolymer grade M25-45XAP® is a UV stabilized material displaying high viscosity compared to standard UV acetal copolymer grades such as Celcon® M90-45H. Hostaform® M25-45XAP® has lower volatile emissions as required for some automotive interiors.

Extrusion grade targeted for shapes free of center porosity. Hostaform® M25AE is a special grade of acetal copolymer targeted for extrusion shapes (rod, bar, plate, etc.) free of center porosity in large diameters and thicknesses. Chemical abbreviation according to ISO 1043-1: POM

special grade for calendering Hostaform® M25IE is a special grade of acetal copolymer targeted for calendering.It provides sheets with a high gloss and smooth surface. Chemical abbreviation according to ISO 1043-1: POM

Hostaform® M30RS is an acetal copolymer targeted for extrusion shapes (rod, bar, plate, etc.) free of center porosity in large diameters and thicknesses with improved processing. Chemical abbreviation according to ISO 1043-1: POM. ECO-B: Hostaform® ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Hostaform® M30RS is an acetal copolymer targeted for extrusion shapes (rod, bar, plate, etc.) free of center porosity in large diameters and thicknesses with improved processing. Chemical abbreviation according to ISO 1043-1: POM.

Low emission grade based on Celcon M90™ for interior automotive Hostaform® acetal copolymer grade M90XAP® is a low emission version, medium viscosity polymer providing optimum performance in general purpose injection molding primarily for the interior automotive market. This grade provides overall excellent performance in many applications.

Media resistant - intermittent exposure to acidic cleaners Hostaform® acetal copolymer grade MR130ACS is a general purpose acetal with improved acid stabilization. Hostaform® MR130ACS demonstrates improved performance over standard acetals after intermittent exposure to acidic cleaners.

POM, Media Resistant Hostaform® MR130AR is an acetal copolymer. This material is modified to have delayed deterioration against highly acidic solutions, including automotive wheel cleaner solutions. It may have a longer delay of deterioration against acidic solutions compared with Hostaform® MR130ACS. In natural form, this material has a tan to yellow hue.

Media resistant - bleach, high modulus grade Hostaform® MR130HPB acetal copolymer is a high modulus, improved toughness grade based on our Hostaform® C 13031, product but specially formulated with improved resistance to intermittent bleach exposure.

Tribological modified Hostaform® MT® SlideX® 1203 is a standard flow injection molding grade with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform®Â MT® SlideX®Â 1203 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Tribological modified Hostaform® MT® SlideX®Â 2404 is a low melt viscosity injection molding grade for fast cycling and thin walled parts with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform®Â MT® SlideX® 2404 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Tribological modified Hostaform® MT® SlideX®Â 2404 is a low melt viscosity injection molding grade for fast cycling and thin walled parts with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform®Â MT® SlideX® 2404 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Improved flow and slip grade for medical technology applications Hostaform® MT®12R01 ECO-B is a low melt viscosity and improved slip grade for fast cycling, thin walled injection molding. Hostaform®Â MT®12R01 ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Improved flow and slip grade for medical technology applications Hostaform® MT®12R01 is a low melt viscosity and improved slip grade for fast cycling, thin walled injection molding. Hostaform®Â MT®12R01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Improved flow grade with optimum properties for medical technology applications Hostaform® MT®12U01 is a moderately high flow grade for faster cycling and thin walled injection molding. Hostaform®Â MT®12U01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Improved flow grade with optimum properties for medical technology applications Hostaform® MT®12U01 is a moderately high flow grade for faster cycling and thin walled injection molding. Hostaform®Â MT®12U01 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents

Improved flow grade with optimum properties and higher stiffness for medical technology applications Hostaform® MT®12U03 ECO-B is a moderately high flow grade for faster cycling and thin walled injection molding with improved stiffness and hardness compared to Hostaform® MT®12U01. Hostaform®Â MT®12U03 ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP < 88> Class VI/ISO 10993 low residual monomers no animal-derived constituents ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Improved flow grade with optimum properties and higher stiffness for medical technology applications Hostaform® MT®12U03 is a moderately high flow grade for faster cycling and thin walled injection molding with improved stiffness and hardness compared to Hostaform® MT®12U01. Hostaform®Â MT®12U03 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents