Orgalloy® EM 067 HSP resin is a flexible polyamide designed to be used for refrigerant barrier layer in air conditioning rubber hose.

Orgalloy® GT 01 NAT resin is a polyamide alloy especially designed for extrusion blow molding. This natural grade offers an excellent thermal resistance, cold impact performance and barrier properties to gas.

Orgalloy® LE 60 LM XV NAT resin is a plasticized polyamide alloy especially designed for tube extrusion. This natural grade dedicated to extrusion offers excellent barrier properties and chemical resistance to hydrocarbons, alcohols and solvents while exhibiting flexibility.

Orgalloy® LE 60 THM NAT resin is a polyamide alloy especially designed for tube and profile extrusion. This natural grade dedicated to extrusion offers excellent barrier properties and chemical resistance to hydrocarbons, alcohols and solvents while exhibiting a good cold impact performance and abrasion resistance. Conform to the European regulations concerning materials in contact with foodstuffs.

Orgalloy® LE 6000 NAT resin is a polyamide alloy especially designed for cable sheathing and blown film extrusion. This natural grade dedicated to extrusion offers excellent barrier properties and chemical resistance to hydrocarbons, alcohols and solvents. Conform to the European regulations concerning materials in contact with foodstuffs.

Orgalloy® LE 6000 ST NAT resin is a polyamide alloy especially designed for blown film extrusion and cable sheathing. This natural grade dedicated to extrusion offers excellent barrier properties and chemical resistance to hydrocarbons, alcohols and solvents.

Orgalloy® LT 4060 ES BLACK T6L resin is a polyamide alloy especially designed for extrusion blow molding. This black grade offers an excellent thermal resistance, cold impact performance and flexibility.

Orgalloy® LT 4060 NAT resin is a polyamide alloy especially designed for mandrel extrusion. This natural grade dedicated to extrusion offers good thermal resistance, cold performance and is very flexible.

Orgalloy® LT 5050 ES BLACK resin is a polyamide alloy especially designed for extrusion blow molding. This black grade offers thermal resistance, cold impact performance and barrier properties to gas while having an intermediate flexibility.

Orgalloy® LT 5050 T6L NAT resin is a polyamide alloy especially designed for tube extrusion. This natural grade dedicated to extrusion offers good barrier properties and chemical resistance to oils and HFC gas, a high thermal resistance and flexibility.

Orgalloy® R 60 ES NAT resin is a polyamide alloy especially designed for blown film extrusion. This natural grade dedicated to extrusion offers good barrier properties and chemical resistance to solvents and alcohols while exhibiting a low surface tension (easy release).

Orgalloy® RDG 113 resin is a polyamide designed to be used for refrigerant barrier layer in air conditioning rubber hose.

Orgalloy® RS 6000 NAT resin is a polyamide 6 alloy designed for injection molding. This natural grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Orgalloy® RS 6010 NAT resin is a fiberglass reinforced polyamide 6 alloy designed for injection molding. This natural grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Orgalloy® RS 6030 NAT resin is a fiberglass reinforced polyamide 6 alloy designed for injection molding. This natural grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Orgalloy® RS 6600 BLACK resin is a polyamide 66 alloy designed for injection molding. This black grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Orgalloy® RS 6620 NAT resin is a fiberglass reinforced polyamide 66 alloy designed for injection molding. This natural grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Orgalloy® RS 6630 BLACK resin is a fiberglass reinforced polyamide 66 alloy designed for injection molding. This black grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® B 409 is a high molecular weight, high melting temperature range, partially crystalline copolyamide delivered in pellet form. The special interest of this product is the combination of high melting temperature and high melt viscosity. Platamid® B 409 can be applied out of a cresolic solution. The thermal activation of the hot melt layer can be accomplished by means of induction of hot air.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® H 005 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® H 005 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). Platamid® H 005 has a very good dry cleaning resistance and washing resistance up to 60°C.

Copolyamide Hot Melt Adhesive / Textile Applications Platamid® H 106 Powderis a very low melt copolyamide adhesive powder for the production of fusible interlinings. Platamid® H 106 Powder is particularly useful where bonding temperature low and short bonding time are required for sensitive shell fabrics. Platamid® H 106 Powder has an excellent dry cleaning resistance and washing resistance up to 40°C.

Copolyamide Hot Melt Adhesive Platamid® H 2513 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This low to medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® H 2513 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc).

Copolyamide Hot Melt Adhesive / Textile Applications Platamid® H 2513 Powder is a medium melt viscosity copolyamide adhesive powder for the production of fusible interlinings. Platamid® H 2513 Powder offers an excellent laundry resistance up to 60°C and an excellent resistance to all kind of steam treatment.

Copolyamide Hot Melt Adhesive Platamid® H 2516 is a thermoplastic copolyamide hot melt adhesive available in pellet form. This fast re-crystallizing grade has been developed to manufacture hot-melt webs, nets and mono- and multi-filaments. Platamid® H 2516 offers a very good adhesion to all kinds of textile substrates based on native and synthetic fibers. Additionally Platamid® H 2516 provides elastomeric properties and high water vapor transmission rate.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® H 2519 is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® H 2519 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). In addition, Platamid® H 2519 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. Dense layers of Platamid® H 2519 are known to have barrier properties against PVC plasticizer migration. Platamid® H 2519 is also characterized by a high content of Bio Based Carbon, making it a bio based solution to difficult-to-solve bonding problems.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® H 2707 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This medium to high melt viscosity grade is particularly suitable for manufacturing webs, mono- and multi-filaments, and films by extrusion. Platamid® H 2707 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.).

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® HX 2544 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This very low melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® HX 2544 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more). Platamid® HX 2544 has good dry cleaning resistance and washing resistance up to 60°C.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® HX 2592 is a specialty thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® HX 2592 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more). In addition,Platamid® HX 2592 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of Platamid® HX 2592 are known to have barrier properties against PVC plasticizer migration. Platamid® HX 2592 is also characterized by a very high content of bio-based carbon (80%), making it a bio-based solution to difficult-to-solve bonding problems.

Copolyamide Hot Melt Adhesive / Textile Applications Platamid® HX 2667 Powder is a medium melt viscosity copolyamide adhesive powder for the production of fusible interlinings. Platamid® HX 2667 Powder offers excellent laundry resistance up to 60°C and an excellent resistance to all kind of steam treatment.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 1276 is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® M 1276 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc). In addition, Platamid® M 1276 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of Platamid® M 1276 are known to have barrier properties against PVC plasticizer migration.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 1657 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This very low melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments. Platamid® M 1657 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc). Platamid® M 1657 has a very good dry cleaning resistance and washing resistance up to 40°C.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 1757 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® M 1757offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc). Platamid® M 1757has a very good dry cleaning resistance and washing resistance up to 60°C.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 2468 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® M 2468 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). Platamid® M 2468 has good dry cleaning resistance and washing resistance up to 60°C.

Rilsamid ® AECHVO is a natural polyamide 12. This grade is designed for cable coating but is also suitable for extrusion.

Rilsamid® AECNO TL resin is a natural polyamide 12. This grade is designed for cable coating.

Rilsamid® AECV BLACK 03 TL resin is a black colored polyamide 12. This black grade is designed for cable coating.

Rilsamid® AECV BLACK P40 T8L resin is a black colored polyamide 12. This black grade is plasticized and designed for cable coating.

Rilsamid® AECV BLACK T8L resin is a black colored polyamide 12. This grade is designed for cable coating.

Rilsamid® AESN BLACK P110 TL resin is a semi-rigid polyamide with improved hydrolysis and impact resistance. This black colored grade is designed for tube extrusion.

Rilsamid® AESN BLACK P201 TL resin is a black colored polyamide 12. This grade is plasticized and designed for tube extrusion. Rilsamid® AESN BLACK P201 TL resin falls into the PA12-PHLY category according to DIN 73378.