SAXAMID 126 is a general purpose polyamide 6 injection-molding-grade. Benefits are short cycle times and good release properties.

SAXAMID 126F10 is a polyamide 6 injection-molding-grade reinforced with 50% glass fibres.

SAXAMID 126F10H is a polyamide 6 injection-molding-grade reinforced with 50% glass fibres. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126F2 is a polyamide 6 injection-molding-grade reinforced with 10 % glass fibres. This product is UL listed.

SAXAMID 126F2H is a polyamide 6 injection-molding-grade reinforced with 10 % glass fibres. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures

SAXAMID 126F2K4 is a 10 % glass fibres and 20% glass beads filled polyamide 6 injection-molding-grade.

SAXAMID 126F2K4U is UV-stabilized a 10 % glass fibres and 20% glass beads filled polyamide 6 injection-molding-grade.

SAXAMID 126F2U is a polyamide 6 injection-molding-grade reinforced with 10 % glass fibres. Additionally this grade is UV-stabilized which is preferred used for outdoor-applications

SAXAMID 126F3 is a polyamide 6 injection-molding-grade reinforced with 15% glass fibres. This product is UL listed.

SAXAMID 126F3H is a polyamide 6 injection-molding-grade reinforced with 15% glass fibres. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126F3U is a polyamide 6 injection-molding-grade reinforced with 15 % glass fibres. Additionally this grade is UV-stabilized which is preferred used for outdoor-applications.

SAXAMID 126F4 is a polyamide 6 injection-molding-grade reinforced with 20% glass fibres. This product is UL listed.

SAXAMID 126F4H is a polyamide 6 injection-molding-grade reinforced with 20% glass fibres. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126F4HH is a polyamide 6 injection-molding-grade reinforced with 20 % glass fibres. Additionally this has a higher content of heat stabilizer which is preferred used at higher ambient temperatures and offers good resistance to hydrolysis

SAXAMID 126F4MW4 is a 20 % glass fibres 20% mineral reinforced polyamide 6 injection-molding-grade. Remarkable properties are dimensional stability and high strength.

SAXAMID 126F4U is a polyamide 6 injection-molding-grade reinforced with 20 % glass fibres. Additionally this grade is UV-stabilized which is preferred used for outdoor-applications.

SAXAMID 126F5 is a polyamide 6 injection-molding-grade reinforced with 25% glass fibres. This product is UL listed.

SAXAMID 126F5H is a polyamide 6 injection-molding-grade reinforced with 25% glass fibres. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126F6 is a polyamide 6 injection-molding-grade reinforced with 30% glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Further remarkable properties are very good processability and good surface quality. This product is UL listed.

SAXAMID 126F6H is a polyamide 6 injection-molding-grade reinforced with 30% glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Further remarkable properties are very good processability and good surface quality. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126F6HH is a polyamide 6 injection-molding-grade reinforced with 30 % glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Further remarkable properties are very good processability and good surface quality. Additionally this has a higher content of heat stabilizer which is preferred used at higher ambient temperatures and offers good resistance to hydrolysis

SAXAMID 126F6U is a polyamide 6 injection-molding-grade reinforced with 30 % glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Further remarkable properties are very good processability and good surface quality. Additionally this grade is UV-stabilized which is preferred used for outdoor-applications.

SAXAMID 126F7 is a polyamide 6 injection-molding-grade reinforced with 35 % glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Additionally properties are very good processability and good surface quality. This product is UL listed.

SAXAMID 126F7H is a polyamide 6 injection-molding-grade reinforced with 35 % glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Further remarkable properties are very good processability and good surface quality. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures

SAXAMID 126F7U is a polyamide 6 injection-molding-grade reinforced with 35 % glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Additionally properties are very good processability and good surface quality. Additionally this grade is UV-stabilized which is preferred used for outdoor-applications.

SAXAMID 126F8 is a polyamide 6 injection-molding-grade reinforced with 40 % glass fibres.This product is UL listed

SAXAMID 126F8H is a polyamide 6 injection-molding-grade reinforced with 40 % glass fibres. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126F8HH is a polyamide 6 injection-molding-grade reinforced with 40 % glass fibres. Additionally this has a higher content of heat stabilizer which is preferred used at higher ambient temperatures and offers good resistance to hydrolysis.

SAXAMID 126F9 is a polyamide 6 injection-molding-grade reinforced with 45% glass fibres. This product is UL listed.

SAXAMID 126F9H is a polyamide 6 injection-molding-grade reinforced with 45% glass fibres. Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126F9HH is a polyamide 6 injection-molding-grade reinforced with 45 % glass fibres. Additionally this grade is hydrolysis - and heat stabilized. Therefore it is often used in applications with higher ambient temperatures

SAXAMID 126F9U is a polyamide 6 injection-molding-grade reinforced with 45 % glass fibres. Because of its high strength and stiffness this grade is often used for stressed parts. Additionally properties are very good processability and good surface quality. Additionally this grade is UV-stabilized which is preferred used for outdoor-applications.

SAXAMID 126H is a general purpose polyamide 6 injection-molding-grade. Benefits are short cycle times and good release properties. Additionally this has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126K6 is a 30% glass beads filled polyamide 6 injection-molding-grade. This grade is characterized by dimensional stability, low warpage and good surface quality.

SAXAMID 126K6H is a 30% glass beads filled polyamide 6 injection-molding-grade. This grade is characterized by dimensional stability, low warpage and good surface quality.Additionally this grade has a higher content of heat stabilizer which is preferred used at higher ambient temperatures.

SAXAMID 126K6HH is a 30% glass beads filled polyamide 6 injection-molding-grade. This grade is characterized by dimensional stability, low warpage and good surface quality. Additionally this grade is heat stabilized and offers good resistance to hydrolysis.

SAXAMID 126K6U is a 30% glass beads filled polyamide 6 injection-molding-grade. This grade is characterized by dimensional stability, low warpage and good surface quality. Additionally this grade is UV-stabilized which is preferred used for outdoorapplications.

SAXAMID 126U is a UV-stabilized polyamide 6 injection-molding-grade. Benefits are short cycle times and good release properties.

SAXAMID 136Q30 is a impact-modified polyamide 6 injection-molding-grade with very good flow properties.

SAXAMID 136Q31 is a impact-modified polyamide 6 injection-molding-grade.