NYCOA 1047 is a general purpose, heat stabilized Nylon 6 resin suitable for injection molding and extrusion applications. It is recommended for applications that require continuous exposure to temperatures in excess of 110° C. It features outstanding proc NYCOA 1047 is approved to numerous automotive specifications. It is recognized by Underwriters Laboratories for thicknesses as low as 0.7mm. It is listed as UL 94V-2. NYCOA 1047 is used for a variety of applications that include electrical connectors, gears, and convoluted tubing.

NYCOA 1417 HS is a heat stabilized and impact modified Nylon 6. This medium viscosity resin was developed for injection molding and extrusion processes for applications requiring improved toughness, flexibility, and good heat stability. NYCOA 1417 HS is suitable for a variety of applications including plugs, connectors, fasteners, clips, tool housings, and flexible tubing extrusion.

NYCOA 1485 HS is a heat stabilized Nylon copolymer TPE which offers outstanding toughness, flexibility, and strength. It is particularly suitable for extrusion processing. The chemical composition of NYCOA 1485 HS delivers improved impact performance at ambient or low temperatures, and increased flexibility to meet higher impact performance. The high thermal and chemical resistance, inherent to Nylon 6, is retained. The chemistry of the resin promotes good adhesion to olefins and other materials. This product is available with custom additive packages: UV stabilizer, flame retardant and custom colors. Typical applications include convoluted tubing, complex profiles, and pipe extrusion.

NYCOA 1595 HS is a medium viscosity Nylon 6 resin, which offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles. Injection molding of high strength parts can be accomplished with molding cycles almost equivalent to those obtained with general-purpose grade resins, even though higher cylinder temperatures may sometimes be required. NYCOA 1595 HS resin has acceptance in diversified applications from convoluted tubing, windshield washer tubing, profile, to tough molded articles.

NYCOA 1637 W is a plasticized, heat stabilized extrusion material used by the Wire and Cable Industry for protective jacketing. NYCOA 1637 W has been specifically designed to facilitate ease of processing over a broad range of conditions and to provide outstanding performance in applications involving exposure to elevated temperatures. NYCOA 1637 W meets the rigorous requirements for a protective material and has been recognized by the Underwriters' Laboratories for jacketing of Type THHN and Type THWN thermoplastic-insulated wire. This product is specially formulated to meet the UL requirements for sunlight resistance.

NYCOA 1637 is a plasticized, heat stabilized extrusion material used by the wire and cable industry for protective jacketing. NYCOA 1637 is available as a low or a high viscosity material in order to facilitate ease of processing over a range of line speeds. In addition NYCOA 1637 is available in a higher extractable version for improved flexibility in MCM size wire. NYCOA 1637 is available with custom additive packages: UV stabilizer, flame retardant and/or custom colors. NYCOA 1637 meets the rigorous requirements for a protective material and has been recognized by the Underwriters' Laboratories for jacketing of Type THHN and Type THWN thermoplastic-insulated wire.

NYCOA 1838 is a flexible Nylon copolymer TPE suitable for both extrusion processing and injection molding. The resin offers excellent toughness, flexibility, and high impact strength combined with easy processability. NYCOA 1838 is recommended for applications that require good toughness and durability. Typical applications include soft-touch handles, bowling pin bases, sporting goods, and flexible fasteners.

NYCOA 1976 is a high viscosity resin particularly suitable for extrusion processing. NYCOA 1976 was specifically formulated to offer very high flexibility, strength, and impact toughness in extruded products.

NYCOA 2001 is a flexible, high viscosity, impact modified Nylon 6 resin for extrusion processing and injection molding. NYCOA 2001 is a high viscosity resin that features a very high resistance to impact, high melt strength, and exceptional toughness. NYCOA 2001 is recommended for extruded profiles and tubes requiring very good toughness, even at low temperatures. Injection molding applications include safety guards, and soft-touch appliance parts.

NYCOA 2011 is a flexible Nylon copolymer TPE particularly suitable for extrusion applications. It has a moderately high melt viscosity, excellent processability and yields extremely tough and resilient finished articles. NYCOA 2011 is recommended for applications that demand easy flow, exceptional toughness, and flexibility with low moisture absorption. The high thermal and chemical resistance, inherent to Nylon 6, is retained. NYCOA 2011 is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and/or customer colors. Typical applications include flexible tubing and fishing line.

NYCOA 2012 is a flexible Nylon copolymer TPE particularly suitable for extrusion and injection molding applications. It has a moderately high melt viscosity, excellent processability and yields extremely tough and resilient finished articles. NYCOA 2012 is recommended for applications that demand easy flow, exceptional toughness, and flexibility with low moisture absorption. Its melt viscosity and strength provide ease of processing for tubing, profile, and molded articles. The high thermal an NYCOA 2012 possesses excellent impact resistance and flexibility, without the use of plasticizer or other exuding additives. It is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and/or customer colors.

NYCOA 2025 is a medium viscosity Nylon 6 resin that contains special additives for improved screw retraction and mold release. It is suitable for injection molding and extrusion processing. NYCOA 2025 provides injection molded parts with greater toughness and durability than standard molding grades, without sacrificing significant cycle time. It was specifically developed to manufacture sport shoe cleats. Other applications include sporting NYCOA 2025 is also well suited for extrusion coating or jacketing applications. It provides a high gloss surface finish and improved line speeds.

NYCOA 2037 is a 15% glass fiber reinforced, impact modified and heat stabilized Nylon 6 resin that features good mechanical properties with improved impact strength and dimensional stability. NYCOA 2037 has excellent chemical resistance to greases, oils and other hydrocarbons. It is available in light stable grades and custom colors. Typical applications include power tool housings, safety helmet parts, and weed trimmer heads.

NYCOA 2038 is a 6% glass-fiber reinforced Nylon 6 resin that offers increased stiffness and dimensional stability. It is formulated to offer outstanding processability, chemical resistance, and an excellent overall balance of mechanical properties. NYCOA 2038 is available in UV stable, custom colors, and impact modified grades. In addition, this material has excellent chemical resistance to greases, oils and other hydrocarbons. NYCOA 2038 is suitable for general-purpose injection molding, and can be found in applications that include gears, hardware items, and weed-trimmer parts.

NYCOA 2046 is a Nylon copolymer developed specially for applications that demand easy flow, exceptional toughness, and flexibility. Its moderately high melt viscosity processes easily on conventional extrusion equipment and yields products with extremely NYCOA 2046 typical applications include fishing line and other industrial monofilament uses. It is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and/or custom colors.

NYCOA 2047 is a Nylon copolymer developed especially for applications that demand easy processing. Its lower melting point, greater flexibility, and lower crystallinity than standard nylon resins, makes it ideal for a variety of extrusion applications. In NYCOA 2047 typical applications include barrier films, tubing, trimmer line, and other industrial monofilaments. NYCOA 2047 complies with all the requirements of the FDA regulations 21 CFR 177.1500.

NYCOA 2061 is a Nylon copolymer developed specially for applications that demand easy flow, toughness, and flexibility. Its moderately high melt viscosity processes easily on conventional extrusion equipment and yields products with extremely high tenacit NYCOA 2061 is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and/or customer colors. Typical applications include premium weed-eater monofilament and fishing line.

NYCOA 2062 is a Nylon copolymer suitable for injection molding and extrusion. This copolymer offers an excellent balance of mechanical properties and outstanding processability. Its lower melting point, greater flexibility, and lower crystallinity than standard nylon resins, makes it ideal for a variety of extrusion applications. In addition, the high relative viscosity provides excellent melt strength and toughness after process NYCOA 2062 complies with all the requirements of the FDA regulations 21 CFR 177.1500. NYCOA 2062 typical applications include barrier films and tubing.

NYCOA 2063 is a Nylon copolymer suitable for injection molding and extrusion. This copolymer offers an excellent balance of mechanical properties and outstanding processability. Its lower melting point, greater flexibility, and lower crystallinity than standard nylon resins, makes it ideal for a variety of extrusion applications. In addition, the high relative viscosity provides excellent melt strength and toughness after process NYCOA 2063 complies with all the requirements of the FDA regulations 21 CFR 177.1500. NYCOA 2063 typical applications include barrier films and tubing.

NYCOA 2076 is a high viscosity resin particularly suitable for extrusion processing. Its high melt viscosity and extremely good melt strength provides ease of processing for tubing, complex profile, and mandrel extrusion. NYCOA 2076 was specifically formulated to offer higher flexibility, higher strength, and very high impact toughness, in large diameter extruded products. The high melt strength prevents ripples or necking in mandrel extrusion. Typical extrusion applications include hose mandrels for rubber vulcanization, high-pressure & hydraulic hoses, and flexible & vacuum tubing.

NYCOA 2084 HS is a high viscosity resin particularly suitable for extrusion processing. Its melt viscosity and strength provide ease of processing for tubing, profile, and molded articles. This material has been specially formulated with an organic heat stabilizer to eliminate copper iodide extraction in windshield-wiper tubing applications. In addition, the base resin in fully extracted to minimize caprolactam extractables. Typical applications include automotive tubing, windshield washer tubing, and hoses.

NYCOA 2090 HS is a medium viscosity Nylon copolymer TPE particularly suitable for extrusion applications. This material offers an outstanding balance of toughness, flexibility, and strength, with improved flame retardancy. The high thermal and chemical resistance, inherent to Nylon 6, is retained. NYCOA 2090 HS provides high melt viscosity and melt strength and hence outstanding processability for tubing, profile, sheet, and monofilament. This product is available with custom additive packages: UV stabilizer, and custom colors.

NYCOA 2137 is low viscosity Nylon copolymer resin that exhibits excellent transparency. The resin was developed especially for applications requiring transparency in thickness up to 5 mm, while retaining the properties and chemical resistance inherent to nylon 6. NYCOA 2137 has been specifically designed to offer easy processability. It can be processed on conventional injection equipment designed to process standard grades of nylon. NYCOA 2137 is available with custom additive packages: heat stabilizer and/or UV stabilizer. Typical injection molding applications include sight glasses, chemical splash goggles, fashion eyeglass frame, high-voltage switch casings, filter housings, pump casings, flow meters, liquid-level indicators, and filter bowls for gas.

NYCOA 2176 is a high viscosity resin particularly suitable for extrusion processing. Its high melt viscosity and extremely good melt strength provides ease of processing for tubing, complex profile, and mandrel extrusion. NYCOA 2176 was specifically formulated to offer high flexibility and strength, superior toughness and high impact resistance, even at low temperatures. The alloy offers improved recyclability with minimum loss in physical properties after repeated extrusi This material performs well in applications where softness, ductility and exceptional impact resistance are required. NYCOA 2176 is available with custom additive packages: heat stabilizer, UV stabilizer and/or flame retardant. Typical extrusion applications include hose mandrels for rubber vulcanization, high-pressure & hydraulic hoses, and flexible & vacuum tubing.

NYCOA 2237 is Nylon copolymer resin that exhibits excellent transparency and good barrier properties. The resin was developed especially for applications requiring transparency in thickness up to 5 mm, while retaining the properties and chemical resistanc NYCOA 2237 has been specifically designed to offer easy processability. It can be processed on conventional extrusion and injection equipment designed to process standard grades of nylon. NYCOA 2237 is available with custom additive packages: heat stabilizer and/or UV stabilizer. Typical injection molding applications include sight glasses, chemical splash goggles, fashion eyeglass frame, high-voltage switch casings, filter housings, pump casings, flow meters, liquid-level indicators, and filter bowls for gas. Typical extrusion applications include high-end transparent fishing lines, tubing, transparent sheets, and decorative films for sports and automotive applications.

NYCOA 2245 is a highly flexible Nylon copolymer TPE developed for both injection molding and extrusion applications. The chemical composition of NYCOA 2245 delivers improved impact performance at ambient or low temperatures, and increased flexibility to meet higher impact performance. The high thermal and chemical resistance, inherent to Nylon 6, is retained. The chemistry of the resin promotes good adhesion to olefins and other materials, without the problem of migration associated with the use of plasticizers. In addition, its high melt viscosity and melt strength provides outstanding processability for tubing, profile, sheet, and monofilament. This product is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and custom colors.

NYCOA 2246 is a highly flexible Nylon copolymer TPE developed for both injection molding and extrusion applications. The chemical composition of 2246 delivers improved impact performance at ambient or low temperatures and increased flexibility to meet hig NYCOA 2246 processes easily at low injection pressure compared to other impact modified Nylons and can be molded or extruded on standard equipment. NYCOA 2246 is recommended for applications that require premium toughness and durability such as sporting goods, appliance parts, and hardware items.

NYCOA 2248 is a 33% glass fiber reinforced/impact modified nylon 6 resin that features a good balance of mechanical properties and possesses outstanding processability. NYCOA 2248 is suitable for injection molding and is recommended in applications such as appliance and tool housings. NYCOA 2248 is available in heat and light stable grades and custom colors.

NYCOA 2256 is a 30% glass fiber reinforced/impact modified nylon 6 resin that features exceptional toughness, stiffness, and dimensional stability. NYCOA 2256 is suitable for injection molding and is recommended in applications in the hardware and automotive industries. NYCOA 2256 is available in heat and light stable grades and custom colors.

NYCOA 2263 is a modified nylon copolymer that features outstanding flexibility and toughness. This resin has been developed for extrusion applications that demand high tenacity and strength, with ease of processability. Typical applications include lawn & garden monofilament and fishing line.

NYCOA 2276 is a Nylon copolymer developed specially for applications that demand a high degree of toughness and flexibility. Its moderately high melt viscosity processes easily on conventional extrusion equipment and yields products with extremely high tenacity and strength. NYCOA 2276 is available with custom additive packages including heat stabilizers, UV stabilizers, or customer colors. Typical applications include premium weed-eater monofilament and fishing line.

NYCOA 2277 G30I is a 30% glass fiber reinforced, impact modified, Nylon Copolymer resin used for injection molding. This grade features excellent strength and stiffness, dimensional stability, and a lower melting point vs. Nylon 6. NYCOA 2277 G30I is also available in UV stable grades, as well as custom colors. Typical applications include sporting goods, power tool housing, and lawn & garden equipment parts.

NYCOA 2277 is a Nylon copolymer developed specially for applications that demand a high degree of toughness and flexibility. Its moderately high melt viscosity processes easily on conventional extrusion equipment and yields products with extremely high tenacity and strength. NYCOA 2277 is available with custom additive packages including heat stabilizers, UV stabilizers, or customer colors. Typical applications include film, sheet, and fishing line.

NYCOA 2279 is a modified nylon copolymer alloy that features outstanding flexibility, toughness, and transparency. This resin has been developed for extrusion applications that demand high tenacity and strength, with ease of processability. Typical applications include lawn & garden monofilament and fishing line.

NYCOA 2301 is a highly flexible Nylon copolymer TPE suitable for extrusion processing and injection molding. NYCOA 2301 processes easily at low injection pressure compared to other impact modified nylons. It can be molded and extruded on standard equipment. NYCOA 2301 is recommended for applications that require premium toughness such as hoses, connectors, tool housing, appliance parts, and hardware items.

NYCOA 2326 HS is an impact modified, heat stabilized nylon 6 resin, which offers outstanding toughness, impact strength and chemical resistance. This material is specially formulated to give a high degree of impact strength, without the loss of stiffness and rigidity. NYCOA 2326 HS processes easily on conventional injection molding and extrusion equipement. Typical applications include clips, fasteners, wiring harnesses, power tool housings, and connectors.

NYCOA 2326 UV is an impact modified, UV stabilized Nylon 6 resin, which offers outstanding toughness, impact strength and chemical resistance. NYCOA 2326 UV has been specially formulated to give a high degree of impact strength, without the loss of stiffness and rigidity. In addition, this product is stabilized to allow continued exposure to sunlight, and others forms of light. NYCOA 2326 UV processes easily on conventional injection molding and extrusion equipment. Typical applications include clips, fasteners, wiring harnesses, power tool housings, and connectors.

NYCOA 2366 is an extremely flexible and transparent Nylon copolymer specifically developed for extrusion applications such as high-end fishing line, and flexible tubing. NYCOA 2366 possesses an extremely high degree of softness, flexibility, and transparency compared to standard monofilament grade nylons. NYCOA 2366 can be easily extruded on most equipment. This product is available in heat and light stable grades.

NYCOA 2610 is a low viscosity Nylon 6/12 that features excellent dimensional stability, with low moisture absorption. This grade is available in custom viscosities, and additive packages. Typical applications include monofilament, tubing, and structural injection molded parts.

NYCOA 2612 is a medium viscosity Nylon 6/12 that features excellent dimensional stability, with low moisture absorption. This grade is available in custom viscosities, and additive packages. Typical applications include monofilament, tubing, and structural injection molded parts.