PA6/ABS blend, 8% glass fibre injection moulding grade. Toughened. Natural colour. Suitable for parts requiring improved stiffness, along with improved impact resistance. Excellent aesthetic surface aspect.

PA6/ABS blend, 8% glass fibre injection moulding grade. UV stabilized. Black colour. Suitable for parts requiring improved stiffness and low moisture absorbtion. Excellent aesthetic surface aspect, intended to resist to light exposure.

PA injection moulding and extrusion grade. Heat stabilized. Natural colour. Suitable for monofilament extrusion and production of injection moulded technical items. Good properties retention upon long term stay at high temperatures.

High Temperature polyamide injection molding grade, 35% glass fiber reinforced. Superior thermal resistance in contact with hot air. Black colour. Suitable for demanding mechanical applications in very severe temperature conditions, where the parts must endure long term contact with hot air until 220-230°C. Very good properties retention after ageing. Typical applications in automotive are under bonnet components, like turbo air ducts, intercooler end caps. This material can be processed with water conditioned tools.

High Temperature polyamide injection molding grade, 35% glass fiber reinforced. Halogen free and superior thermal resistance in contact with hot air. Electrically neutral heat stabilization. Black colour. Suitable for demanding mechanical applications in very severe temperature conditions, where the parts must endure long term contact with hot air until 220-230°C. Very good improvement of mechanical properties retention after ageing. Typical applications in automotive are under bonnet components, like turbo air ducts, intercooler end caps. This material can be processed with water conditioned tools.

High Temperature polyamide injection molding grade, 50% glass fibre reinforced. Superior thermal resistance in contact with hot air. Black colour. Suitable for demanding mechanical applications in very severe temperature conditions, where the parts must endure long term contact with hot air until 220-230°C. Very good properties retention after ageing. Typical applications in automotive are under bonnet components, like turbo air ducts, intercooler end caps. This material can be processed with water conditioned tools.

PA6 injection moulding grade. Low friction. Natural grey colour. Suitable for parts and components requiring low friction and improved wear resistance, such as gears, bearings, and cams.

PA6 12% glass fibre reinforced, extrusion, blow and injection moulding grade. Heat stabilized. Black colour. Suitable for blow-moulding of tubes and containers.

PA6 15% glass fiber reinforced, high viscosity blow moulding grade. Toughened, heat stabilized. Black colour. Suitable for blow-moulding of tubes and containers; typically used for automotive air pipes, including turbo air ducts.

PA6 high viscosity blow moulding grade. Toughened, heat stabilized. Black colour. Suitable for blow-moulding of tubes and containers; typically used for automotive air ducts.

PA6 30% mineral filled injection moulding grade. Heat stabilized. Natural colour. Suitable for parts requiring good dimensional stability and mechanical properties, reduced shrinkage and low warpage.

Polyamide 6, 20% glass bead, injection moulding grade, non UV stabilized, colour matched to DX9 black. Suitable for parts requiring improved flatness and good dimensional stability. This product should not be considered for weather able applications.

PA6 30% glass beads filled injection moulding grade. Natural colour. Suitable for parts requiring good dimensional stability, reduced shrinkage and low warpage. It provides a good surface finish to moulded parts.

PA6 30% glass beads filled injection moulding grade. Black colour. Suitable for parts requiring good dimensional stability, reduced shrinkage and low warpage. It provides a good surface finish to moulded parts.

Polyamide 6 compound formulated primarily for flexible extrusion applications, in particular flexible tubingand convolute tubing. This product exhibits a balance of outstanding chemical resistance, flexibilty, ductility and toughness.

PA6 10% glass fiber reinforced flame retardant injection moulding grade. Halogen and phosphorus free. Toughened. Black colour. Suitable for parts requiring improved impact strength along with enhanced stiffness Rated V-2 according to UL-94.

PA6 33% glass fibre, injection mouding grade, impact modified, heat and UV stabilized, Ebony matched Black colour. Suitable for parts requiring improved impact strength along with enhanced stiffness, in addition to good thermal and UV resistance.

PA6 injection moulding grade. Toughened. Natural colour. Suitable for parts requiring good impact strength.

PA6 injection moulding grade. Nucleated, fast cycling. Natural colour. General purpose grade, suitable for parts requiring high productivity.

PA6 injection moulding grade. Nucleated, fast cycling. Black colour General purpose grade, suitable for parts requiring high productivity.

PA6 injection moulding grade. Lubricated, heat stabilized. Black colour. General purpose grade, suitable for parts requiring high productivity.

PA6 injection moulding grade. Toughened. Natural colour. Suitable for parts requiring improved impact resistance.

PA6 injection moulding grade. Toughened and heat stabilized. Natural colour Suitable for applications requiring a balance of outstanding flexibility, ductility and toughness.

PA6 injection moulding grade. Toughened. Natural colour. Suitable for parts requiring improved impact resistance.

PA6 15% glass fibre reinforced, impact modified, heat stabilized. Natural colour. Suitable for parts requiring improved impact strength along with enhanced stiffness.

PA6 15% glass fibre injection moulding grade. Heat stabilized. Improved UV resistance. Black colour Suitable for parts requiring improved stiffness, good heat ageing resistance and which must also resist to outdoor exposure.

PA6 30% glass fiber reinforced injection moulding grade. Lubricated, high flowability. Improved UV resistance. Natural colour. Suitable for parts requiring high stiffness and good mechanical resistance, which must also resist to outdoor exposure.

PA6 30% glass fiber and mineral filler reinforced injection moulding grade. Heat stabilized. Natural colour. Suitable for parts requiring improved stiffness and dimensional stability, reduced shrinkage and low warpage.

PA6 30% glass fibre and mineral filler reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring improved stiffness and dimensional stability, reduced shrinkage and low warpage.

PA6 40% glass fibre and mineral filler reinforced injection moulding grade. Heat stabilized. Natural colour. Suitable for parts requiring improved stiffness and dimensional stability, reduced shrinkage and low warpage.

PA6 40% glass fibre and mineral filler reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring improved stiffness and dimensional stability, reduced shrinkage and low warpage.

PA6 30% glass fibre and glass beads reinforced injection moulding grade. Natural colour. Suitable for parts requiring improved stiffness and dimensional stability, reduced shrinkage and low warpage. Good surface aspect.

Polyamide 6 compound reinforced with 25% of a combination of special glass fibre and minerals. This injection moulding grade is also heat stabilized and lubricated. Suitable for parts requiring rigidity, dimensional control, and low warp after repeated high temperature exposure.

PA6 40% combination of glass fibre and specialty minerals, improved heat and flow, injection moulding grade. Colour matched to FCA DX9 Black colour standard Suitable for parts requiring good, dimensional stability, reduced shrinkage and low warp repeated high temperature exposure intended to resist outdoor exposure.

PA6 40% combination of glass fibre and specialty minerals, improved heat and UV, easy flow, injection moulding grade. Colour matched Black Colour Suitable for parts requiring good, dimensional stability, reduced shrinkage and low warp repeated high temperature exposure intended to resist outdoor exposure.

Polyamide 6 compound reinforced with 40% of a combination if glass fibre and specialty minerals, heat stabilized, UV stabilized, and lubricated, injection moulding grade. Suitable for parts requiring rigidity, dimensional control, and low warp after repeated high temperature exposure.

PA6 40% combination of glass fibre and specialty minerals, improved heat and UV, easy flow, injection moulding grade. Ebony Black Colour Suitable for parts requiring; good dimensional stability, low warp after exposure to repeated high temperature cycle, and resistant to outdoor UV exposure.

PA6 40% combination of glass fibre and specialty minerals, improved heat stability, easy flow, injection moulding grade. deep black colour Suitable for parts requiring; good dimensional stability, reduced shrinkage, low warp after exposure to repeated high temperature cycle.

PA6 40% glass fibre and mineral reinforced injection moulding grade, heat stabilized. Black colour Suitable for parts requiring high stiffness, good mechanical resistance and excellent heat ageing properties retention, good dimensional stability

PA6 15% glass fiber reinforced injection moulding grade. Natural colour. Suitable for parts requiring improved stiffness.