PA66 flame retardant injection moulding grade. Halogen and phosphorus free. Natural colour. Suitable for parts where fire retardancy is required, particularly for thin-walled items of with long flow paths. Rated V-0 at 0.4 mm according to UL-94.

PA66 flame retardant injection moulding grade. Halogen and phosphorus free. High flowability. Natural colour. Suitable for parts where fire retardancy is required, particularly for thin-walled items of with long flow paths. Rated V-0 at 0.4 mm according to UL-94.

PA66 flame retardant injection moulding grade. Halogen and phosphorus free. Black colour. Suitable for parts where fire retardancy is required, particularly for thin-walled items of with long flow paths. Rated V-0 at 0.4 mm according to UL-94. Also suitable for monofilament extrusion.

PA66 flame retardant injection moulding grade. Halogen and phosphorus free. Orange colour. Suitable for parts where fire retardancy is required, particularly for thin-walled items of with long flow paths. Rated V-0 at 0.4 mm according to UL-94. Also suitable for monofilament extrusion.

PA66 flame retardant injection moulding grade with enhanced mechanical properties after thermal aging. Halogen and phosphorus free. Black colour. Suitable for parts where fire retardancy is required. Rated V-0 at 0.25 mm according to UL-94.

PA66 flame retardant injection moulding grade with enhanced mechanical properties after thermal aging. Enhanced flowability. Halogen and phosphorus free. Black colour. Suitable for parts where fire retardancy is required. Rated V-0 at 0.25 mm according to UL-94.

PA66 flame retardant injection moulding grade with red phosphorus. 15% glass fiber reinforced. Deep black colour. Suitable for parts requiring fire retardancy and improved stiffness. Rated V-0 at 0.75mm according to UL-94.

PA66 flame retardant with Red Phosphorus. 15% glass fiber reinforced, highly heat resistance injection moulding grade, black colour. Suitable for parts requiring fire retardancy, high heat resistance and improved stiffness. Rated V-0 at 0.75mm according to UL-94.

PA66 15% glass fibre reinforced, flame retardant, injection mouldng grade, halogen and red phosphorus free, heat stabilized. Black colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Good electrical properties. Tested V-0 according to UL-94 method.

PA66 flame retardant injection moulding grade, halogen and red phosphorus free. 25% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy along with improved stiffness and mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA66 flame retardant injection moulding grade with red phosphorus. 25% glass fiber reinforced. Improved impact properties. Black colour. Suitable for parts requiring fire retardancy along with medium stiffness and good mechanical resistance. Rated V-0 at 0.75 mm according to UL-94.

PA66 flame retardant injection moulding grade, halogen and phosphorus free. 25% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy along with medium stiffness and good mechanical resistance. Low smoke toxicity and optical density. Rated V-0 according to UL-94.

PA66 flame retardant injection moulding grade, halogen and red phosphorus free. 25% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy along with medium stiffness and mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA66 flame retardant for injection molding, halogen and red phosphorus free. 25% glass fiber reinforced. Black colour. Suitable for parts requiring flame retardancy along with medium stiffness and good mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA66 flame retardant injection moulding grade, halogen and red phosphorus free with improved GWIT performances. 25% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy along with medium stiffness and mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA66 flame retardant for injection molding, halogen and red phosphorus free. 25% glass fiber reinforced. Black colour. Suitable for parts requiring flame retardancy along with medium stiffness and good mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA66 flame retardant injection moulding grade. 25% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy, medium stiffness and good mechanical resistance. Rated V-0 according to UL-94. ISO 1043 : PA66-T GF25 FR(17+72)

PA66 flame retardant injection moulding grade. 30% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy, high stiffness and good mechanical resistance. Rated V-0 according to UL-94.

PA66 flame retardant injection moulding grade with red phosphorus. 30% glass fiber reinforced. Natural red brick colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Rated V-0 at 0.75 mm according to UL-94.

PA66 flame retardant injection moulding grade, 30% glass fibre reinforced. Halogen and phosphorus free, improved fluidity. Electrical light grey colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA66 flame retardant for injection molding grade with red phosphorus. Reinforced with 35% glass fiber. Improved impact properties. Black Colour. Suitable for parts requiring fire retardancy along with good stiffness and mechanical resistance. Rated V-0 at 0.75 mm according to UL-94.

PA66 flame retardant injection moulding grade, halogen and red phosphorus free. 35% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA66 flame retardant injection moulding grade with red phosphorus. 50% glass fiber reinforced. Natural red brick colour. Suitable for parts requiring fire retardancy along with high stiffness and mechanical resistance. Rated V-0 at 0.8 mm according to UL-94. Improved Glow Wire behaviour (GWIT). Typically employed for domestic appliances.

PPA flame retardant injection moulding grade, 30% glass fiber reinforced. Halogen and red phosphorus free. High melting point. Natural colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Suitable for Lead Free Soldering application. Rated V0 according to UL94.

PPA flame retardant injection moulding grade, 30% glass fiber reinforced. Halogen and red phosphorus free. High melting point. Black colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Suitable for Lead Free Soldering application. Rated V0 according to UL94.

PA6 flame retardant injection moulding grade. Halogen and red phosphorus free. Natural colour. Suitable for parts where fire retardancy is required. Rated V-0 at 0.4 mm according to UL-94.

PA6 flame retardant injection moulding grade. Halogen and phosphorus free. Black colour. Suitable for parts where fire retardancy is required. Rated V-0 at 0.4 mm according to UL-94.

PA6 flame retardant injection moulding grade. Halogen and phosphorus free. Deep Black colour. Suitable for parts where fire retardancy is required. Typical applications include cable conduits and cable jacketings for transportation sector. Rated V-0 at 0.4 mm according to UL-94.

PA6 flame retardant injection moulding grade, halogen and phosphorus free. Glass fiber reinforced. Black colour. Environmentally friendly flame retardant grade with low toxicity and minimum smoke density during combustion. Rated V-0 according to UL-94. Improved thermal conductivity.

PA6 flame retatrdant injection moulding grade, halogen and red phosphorus free. 15% glass fibre reinforced. Deep Black colour Suitable for parts requiring fire retardancy along with improved stiffness and mechanical resistance. Good electrical insulating properties. Rated V-0 if tested in accordance with UL-94 method.

PA6 flame retatrdant injection moulding grade, halogen and red phosphorus free. 15% glass fibre reinforced. Deep Black colour Suitable for parts requiring fire retardancy along with improved stiffness and mechanical resistance. Good electrical insulating properties. Rated V-0 if tested in accordance with UL-94 method.

PA6 flame retardant injection moulding grade, halogen and phosphorus free. 25% glass fiber reinforced. Natural colour. Suitable for parts requiring fire retardancy along with medium stiffness and good mechanical resistance. Low smoke toxicity and optical density. Rated V-0 according to UL-94.

PA6 flame retardant injection moulding grade, halogen and phosphorus free. 30% glass fiber reinforced and heat stabilized. Black colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA6 flame retardant injection moulding grade, halogen and red phosphorus free with improved GWIT performances. 30% glass fiber reinforced. Heat stabilized, natural colour. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.

PA6 flame retardant injection moulding grade, halogen and phosphorus free. 30% glass fiber reinforced. Orange colour (comparable to RAL 2003) stable at high temperature. Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Good electrical insulating properties. Laser markable grade. Rated V-0 according to UL-94.

PA6 flame retardant injection moulding grade.. 30% glass fiber reinforced. Black colour. Suitable for parts requiring fire retardancy, high stiffness and good mechanical resistance. Good electrical insulating properties. Rated V-0 according to UL-94.