Ultramid B3ZG7 BK20560 is a 35% glass reinforced, black, heat stabilized, impact modified PA6 injection molding grade.

Ultramid B3ZG7 OSI BK23273 is a 35% glass reinforced, pigmented black, heat stabilized, impact modified PA6 injection molding grade. It was developed to meet demanding mechanical and chemical requirements for the automotive oil pan application. Applications Typical application is automotive oil pan.

Ultramid B3ZG7 SC is an uncolored, 35% glass reinforced, heat stabilized, impact modified PA6 injection molding grade.

Ultramid® B40 01 is a polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.

Ultramid® B40 L 01 is a lubricated polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.

Ultramid® B40 LN 01 is a polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film. Clarity and thermoformability are enhanced by the incorporation of nucleating and slip agent.

Ultramid® C 216 V35 Black Z is a polyamide PA6, reinforced with 35 % of glass fibre, for injection moulding. This grade has good mechanical properties and offering an excellent combination between thermal and mechanical properties.

Ultramid® C 216 V40 Black Z is a polyamide 6, reinforced with 40% of glass fibre, for injection moulding. This grade has good mechanical properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL® C 218 V18 Black is a polyamide 6, heat stabilized, reinforced with 18% of glass fiber, for injection moulding. The product offers an excellent combination between thermal and mechanical properties.

Ultramid® C 218 V30 Black 21N is a polyamide 6, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. The product offers an excellent combination between thermal and mechanical properties.

Ultramid® C 218 V33 Black is a polyamide 6, reinforced with 33% of glass fiber, heat stabilized, for injection moulding. The product offers an excellent combination between thermal and mechanical properties.

Ultramid® C 548B Black is an unreinforced polyamide 6, high viscosity, for extrusion blow-moulding. This grade offers a good processing behaviour, high impact resistance even at low temperature and high barrier properties especially to fluids such as fuels and oils, as well as a high toughness.

Ultramid® C33 L is a lubricated copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film. Ultramid® C33 L is well suited for the production of nonsymetric blown film with reduced curl. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

Ultramid® C33 LN is a copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

Ultramid® C33 is a copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film and monofilaments. Ultramid® C33 is well suited for the production of nonsymetric blown film with reduced curl. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

Ultramid C3U BK23079 is an injection molding, general purpose PA6/66, pigmented black grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness. Applications It is used for impact resistant electrical insulating parts such as contact bases and plug connector strips.

Ultramid C3U is an injection molding, general purpose PA6/66 grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness. Applications It is used for impact resistant electrical insulating parts such as contact bases and plug connector strips.

Ultramid® C40 L is a lubricated copolyamide 6/66 grade of high viscosity for the production of monofilaments and blown film. Ultramid® C40 L is well suit-ed for the production of high transparency, nonsymetric blown film with re-duced curl. Its very low melting point compared to standard PA 6 is advan-tageous for coextrusion with temperature sensitive polymers like EVOH.

Ultramid D3WG12 HMG BK00102 is a 60% glass reinforced, injection molding polyamide offering high strength and stiffness. Due to inherently lower moisture absorption, Ultramid D3WG12 HMG BK00102 shows improved retention of mechanical properties after moisture conditioning. In addition, molded parts possess an exceptional surface finish. Applications Ultramid D3WG12 HMG BK00102 was designed for applications requiring very high rigidity and should be considered for components that are constructed with metal.

Ultramid Endure D3G7 BK20560 is a glass fiber reinforced injection molding grade with high stiffness, very good flowability, and excellent heat aging resistance up to at least 220 degC (428 degF).

Ultramid Endure D5G3 BM BK20560 is a glass fiber reinforced blow molding grade with good sagging behavior, ideal swelling and excellent heat aging resistance up to at least 220 degC (428 degF).

Ultramid® eXten D 219WFC V50 Black is a polyamide 6.10, reinforced with 50% of glass fibre, heat stabilized with organic stabilizers, for injection moulding. This grade offers lower water uptake, higher dimensional stability and enhanced chlorine resistance versus standard PA 6.6. It offers too an enhanced corrosion resistance, a reduction in lead levels versus standard metal solutions and an increase in ease of processing and part design freedom versus metal solutions and other plastics. It is used for cold and warm water plumbing components including, but not limited to, components in contact with drinking water systems globally where elevated levels of chlorine could be present.

Ultramid HFX 32 is a polyamide specialty extrusion resin combining high flexibility, excellent burst performance and outstanding chemical resistance. It offers high melt strength and enhanced heat stability. Applications Ultramid HFX 32 is recommended for tubing applications requiring an outstanding balance of flexibility, chemical and heat resistance and burst performance.

Ultramid HFX 33 is a polyamide specialty extrusion resin combining high flexibility, excellent burst performance and outstanding chemical resistance. It offers high melt strength and enhanced heat stability. Applications Ultramid HFX 33 is recommended for tubing applications requiring an outstanding balance of flexibility, chemical and heat resistance and burst performance.

Ultramid HFX 35 is a polyamide specialty extrusion resin combining high flexibility, outstanding chemical resistance and enhanced heat stability. Applications Ultramid HFX 35 is recommended for pipe and tubing applications requiring high melt strength and flexibility.

Ultramid N-276 BK ND3007 is a 40% mineral/glass reinforced, heat stabilized injection molding PA6/6.

Ultramid N-333 NF3001 is a 33% glass reinforced, heat stabilized, injection molding PA66 uncolored. Applications It is especially formulated for power steering reservoir applications.

Ultramid® PSB 286 is an unreinforced polyamide PA6, with very good lubrication, standard for fast injection cycles, for injection moulding. This grade offers high fluidity and good mould release.

Easy flowing, stabilized product for fast processing.

Transparent, tough, amorphous copolyamide for injection moulding, specially developed for tight overmoulding of metal inlays.

Ultramid® STAR AF 219 V30 Black is a polyamide 6.6, high flow, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has enhanced moulding behaviors and better surface aspect. It offers an excellent combination between thermal and mechanical properties. This grade restricts electrolytic corrosion. This grade is ideal for Mucell® injection moulding technology.

Ultramid® STAR AF 219 V30 Natural is a polyamide 6.6, high flow, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has enhanced moulding behaviors and better surface aspect. It offers an excellent combination between thermal and mechanical properties. This grade restricts electrolytic corrosion.

Ultramid® STAR S 216 V30 Natural is based on a patented high flow polyamide 6 resin, reinforced with 30% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more freedom in mould and part design versus a standard polyamide solutions.

Ultramid® STAR S 216 V35 Natural is based on a patented high flow polyamide 6 resin, reinforced with 35% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more freedom in mould and part design versus a standard polyamide solutions.

Ultramid® STAR S 218 V30 Black 31N is based on a patented high flow polyamide 6 resin, heat stabilized, reinforced with 30% of glass fibre, for injection moulding. Due to its outstanding flow characteristics, this grade provides a significant productivity improvement and allows more freedom in mould and part design versus a standard polyamide solutions.

Ultramid® STAR S 218 V30 Natural is based on a patented high flow polyamide 6 resin, heat stabilized, reinforced with 30% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more freedom in mould and part design versus a standard polyamide solutions.

Ultramid® STAR S 218L1 V30 Black is based on a patented high flow polyamide 6 resin, heat stabilized, UV stabilized, reinforced with 30% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more freedom in mould and part design versus a standard polyamide solutions.

Ultramid® STAR SX 216 V50 Natural is based on a patented high flow polyamide 6 resin, reinforced with 50% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mould and part design versus a standard polyamide solutions.

Ultramid® STAR SX 218 V50 Black Z is based on a patented high flow polyamide 6 resin, heat stabilized, reinforced with 50% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mould and part design versus a standard polyamide solutions.

Ultramid® STAR SX 218L1 V50 BLACK 38N-K is based on a patented high flow polyamide 6 resin, reinforced with 50% glass fibre, heat & improved UV stabilized, for injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mold and part design versus a standard polyamide solution.