Akoafloor PB 4235-1 ivory is a highly isotactic polyolefin manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoafloor PB 4235-1 complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for extrusion into pipe and injection moulding into fittings for nonpotable heating water applications. Akoafloor PB 4235-1 is available in ivory colour in pellet form. Akoafloor PB 4235-1 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoafloor PB R 509 brown is a highly isotactic random copolymer manufactured from butene-1 monomer. The product provides good long term hydrostatic strength also at elevated temperatures combined with extremely high flexibility. Akoafloor PB R 509 complies with requirements specified in ISO 12230, DIN 16968/DIN 16969 for PB-1 pipe applications. The grade is typically used for under floor heating or surface cooling applications. Akoafloor PB R 509 is available in brown colour in pellet form. Akoafloor PB R 509 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoafloor PB R 509 CAMEL is a highly isotactic random copolymer manufactured from butene-1 monomer. The product provides good long term hydrostatic strength also at elevated temperatures combined with extremely high flexibility. Akoafloor PB R 509 CAMEL complies with requirements specified in ISO 12230, DIN 16968/DIN 16969 for PB-1 pipe applications. The grade is typically used for under floor heating or surface cooling applications. Akoafloor PB R 509 CAMEL is available in camel colour in pellet form. Akoafloor PB R 509 CAMEL may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB 4237 grey is a highly isotactic polyolefin homopolymer manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4237 complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications. Akoalit PB 4237 is available in grey colour in pellet form. Akoalit PB 4237 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB 4267 GREY is a premium highly isotactic polyolefin manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4267 GREY complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for high-performance extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications where improved organoleptic properties are required. Akoalit PB 4267 GREY is available in grey colour in pellet form. Akoalit PB 4267 GREY may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB 4268 white is a premium highly isotactic polyolefin manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4268 complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for high-performance extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications where improved organoleptic properties are required. Akoalit PB 4268 is available in white colour in pellet form. Akoalit PB 4268 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application

ICORENE® N3002 is a polybutene -1 homopolymer powder specifically designed for use as a layer adhesive. The powder is free flowing and easy to distribute using a scatter coating machine. This grade can be used in various applications as a hot melt adhesive. For example carpet backing or non woven layer lamination. It features very good adhesion to PP and PE polymer substrates and very low viscosity to give good flow around the fibres enabling superior mechanical adhesion.

ICORENE® N3012 is a powder version of polybutene -1 random copolymer with low ethylene content, specifically designed for use as a layer adhesive. The powder is free flowing and easy to distribute using a scatter coating machine. This grade can be used in various applications as a hot melt adhesive. For example carpet backing or tuft locking, non woven lamination. It features very good adhesion to PP and PE polymer substrates and very low viscosity to give good flow around the fibers enabling superior mechanical adhesion. MFI measured by ISO 1133-1 is 1200 g/10 minutes

ICORENE® N3025 is a powder version of polybutene -1 random copolymer with low ethylene content, specifically designed for use as a layer adhesive. The powder is free flowing and easy to distribute using a scatter coating machine. This grade can be used in various applications as a hot melt adhesive. For example carpet backing or tuft locking or non woven lamination. It features very good adhesion to PP and PE polymer substrates and very low viscosity to give good melt flow around the fibers enabling superior mechanical adhesion. Recycling of the finished PP carpet is possible due to the complete miscibility of the PB1 in PP polymer. MFR measured by ISO 1133-1 is 2500 g/10 minutes

Polybutene-1 grade Koattro DP 0400M is a semi-crystalline homopolymer, which can be used where creep, environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It is less compatible in blends with polyethylene but it is still easily dispersible. Its relative slow crystalliation kinetics allows for an excellent wetting behaviour. Besides its high shear sensitive flow behaviour it remains easily dispersible, also in even more incompatible polymers like thermoplastic elastomers.

Polybutene-1 grade DP 8220M is a random copolymer of butene-1 with medium ethylene content. This grade is highly compatible with polypropylene due to its similar molecular structure, and it is used to modify the sealing behavior of PP-based films - a typical example is its use to reduce the seal initiation temperature of BOPP sealing layers. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Food law compliance information about this product can be found in separate product documentation.

Polybutene-1 grade DP8310M is a random copolymer of butene-1 with high ethylene content. This product is primarily used to modify sealing properties or mechanical properties of other polyolefins such as polypropylene or polyethylene. DP 8310M is highly compatible with polypropylene due its similar molecular structure. It is less compatible in blends with polyethylene but it is still easily dispersible. Food law compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Polybutene-1 grade Koattro DP8510M is a random copolymer of butene-1 with high ethylene content. This product is primarily used in hot melt adhesive formulations and to improve rheological properties in blends. Koattro DP8510M is highly compatible with polypropylene due to its similar structure but less compatible in blends with polyethylene, but still easily dispersable. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its high shear-sensitive flow behavior means that it remains easily dispersable also in even more incompatible polymers like thermoplastic elastomers.

Polybutene-1 grade Koattro DP8911ME is a random copolymer of butene-1 with high ethylene content. Koattro DP8911ME is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds, in order to increase open time and maintain mechanical integrity at higher temperatures (higher shear adhesion failure temperature or SAFT). It can be used in combination with a wide variety of non-polar resins and waxes.

Koattro KT AR05 is a novel plastomeric material based on LyondellBasell technology with unique characteristics. The product shows an excellent compression set performance which is highly compatible with Polypropylene. Blended with PP it enhances softness, elastic recovery, elongation at break and impact resistance whilst improving transparency and reducing stress whitening. Blended at low concentrations in PP, Koattro KT AR05 enhances also the thermal bonding strength. Koattro KT AR05 is available in free flowing pellet form.

Purell KT MR07 is a plastomeric material based on Lyondellbasell technology with unique characteristics and is highly compatible with Polypropylene (PP). This product blended with PP enhances softness, elastic recovery, elongation at break and impact resistance whilst improving transparency and reducing stress whitening. Purell KT MR07 is available in free flowing pellet form.

Polybutene-1 (PB-1) grade Toppyl PB 0110M is a semi-crystalline homopolymer, which is used where creep, environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It can be used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible. It forms a 2-phase structure which is the basis of seal peel technology for easy-opening packaging applications. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers.

Polybutene-1 grade Koattro PB 0300M is a semi-crystalline homopolymer, which is used where creep, environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It is used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible . It forms a 2 phase structure which is the basis of the seal peel technology for easy-opening packaging applications. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers.

Polybutene-1 grade Koattro PB0800M is a semi-crystalline homopolymer, which can be used where creep and environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It can be used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible. It's relative slow crystalliation kinetics allows for an excellent wetting behaviour. Besides their high shear sensitive flow behaviour they remain easily dispersible also in even more incompatible polymers like thermoplastic elastomers.

Polybutene-1 grade PB0801M is a semi-crystalline homopolymer, which can be used where creep and environmental stress crack resistance and elevated temperature performance are key requirements. This polymers unique processing behaviour allows it to use as a processing modifier (internal lubricant) in polyolefins and Thermoplastic elastomeric compounding applications. It can absorb high loads of filler. It allows to be used in masterbatch applications were an excellent pigment dispersion is a key requirement. Finally it is highly appreciated in hot melt adhesive applications for its high cohesive strength and excellent wetting behaviour towards non polar substrates Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Polybutene-1 grade PB 4235-1 ivory is a highly isotactic polyolefin manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. PB 4235-1 complies with requirements specified in ISO 15826, ISO 12230, DIN 16968;'DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for extrusion into pipe and injection moulding into fittings for non-potable heating water applications. PB 4235-1 is available in ivory colour in pellet form.. PB 4235-1 is not being sold for pipe applications in North America. The grade is not intended for medical or pharmaceutical applications.

Polybutene-1 (PB-1) grade Toppyl PB 8220M is a random copolymer of butene-1 with medium ethylene content. This grade is highly compatible with polypropylene due to its similar molecular structure, and it is used to modify the sealing behavior of PP based films: a typical example is its use to reduce the seal initiation temperature of BOPP sealing layers. The relatively slow kinetics of crystallization allow an excellent wetting behavior.Toppyl PB 8220M highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Toppyl PB 8220M can also be used in seal-peel application. Compared with Toppyl PB 8640M or Toppyl PB 8340M, in blown film seal-peel Toppyl PB 8220M provides better optical properties (haze and clarity) but with narrow sealing window.

Polybutene-1 (PB-1) grade Toppyl PB 8340M is a random copolymer of butene-1 with low ethylene content. In blends with PE polymers, it forms a separate, but well-dispersed phase. Its primary use is as a minority blend component in the seal layer of easy-opening packaging films, produced by cast film extrusion. A typical PE blend partner forToppyl PB 8340M could be any ethylene homo-or copolymer in the melt index range of 2.0 to 8.0 g/10min. PB-1 is also highly compatible with polypropylene due to its similar molecular structure, and it can be used to modify PP sealing behavior or mechanical properties such as impact strength. PB-1 crystallizes slowly and is very shear sensitive in its flow behavior.

Polybutene-1 (PB-1) grade Toppyl PB 8640M is a random copolymer of butene-1 with low ethylene content. In blends with PE polymers it forms a separate but well-dispersed phase. Its primary use is as a minority blend component in the seal layer of easy-opening packaging films, produced by blown film extrusion. A typical PE blend partner forToppyl PB 8640M could be any ethylene homo-or copolymer in the melt index range of 0.7 to 2.0 g/10min. Toppyl PB 8640M is also highly compatible with polypropylene due to its similar molecular structure, and it can be used to modify PP sealing behavior or mechanical properties such as impact strength. PB-1 crystallizes slowly and is very shear sensitive in its flow behavior.

Polybutene-1 grade Koattro PB M 1200M is a random copolymer of butene-1 with low ethylene content. Koattro PB M 1200M is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds. In order to maintain mechanical integrity at higher temperatures (higher shear adhesion failure temperature or SAFT) of an HMA, it can be used in combination with a wide variety of non-polar resins and waxes. Koattro PB M 1200M helps to reduce the amount of resin needed in a HMA formulation.

Toppyl SP 2101 C is a fully formulated seal peel solution developed for the cast and blown film technology. This product has been designed to offer a peelable seal to PP substrates and is suitable for sterilisable applications. Toppyl SP 2101 C is a solution created to replace completely the sealing layer in a coextruded film. It provides a constant easy-opening force over a wide sealing temperature window and is readily processable on conventional equipment in both mono and co-extruded structures. EU and FDA compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.