Recycl-IN rLL9610 is a natural hybrid polyethylene containing 70% of post-consumer recyclate. Benefits & Features Recycl-IN rLL9610 is a ready-to-use hybrid polyethylene compound containing 70% of postconsumer recyclate (PCR) and supplied in a pellet form. The product is made from selected PCR materials and virgin resins. Recycl-IN rLL9610 contains over 70% of linear low density polyethylene. This resin presents: - Good balance between stiffness and film strength - Good optical properties - Good processability Applications Recycl-IN rLL9610 is a blown film resin developed for use in non-food applications such as doypacks, secondary packaging, liners, FFS,…

REDI-LINK™ PE is a two component moisture curable crosslinkable system for use in low voltage power cable applications. DFDA-5440 Natural, with a density of 0.922, may be crosslinked after extruding with the DFDA-5430 Natural catalyst masterbatch, with a density of 0.921, in a 50:50 ratio and then allowing moisture to diffuse into the insulation. If a black product is required, the addition of DFDB-5410 Black 55 carbon black masterbatch to DFDA-5430 Natural and DFDA-5440 Natural is recommended. Specifications When DFDA-5440 Natural is crosslinked with DFDA-5430 Natural and optionally, DFDB-5410 Black 55, it meets typical low voltage specifications such as those found in: - IEC-60502 - GB 12706-91 - IS 7098 - 1988

E19010 is a Linear Low Density Polyethylene (LLDPE) grade, for General Purpose Applications like Blending for Injection Moulding, Drip Lateral and Thick Extruded Products. This grade meets the requirements of material as per IS 12786:1989 on irrigation equipment - Polyethylene pipes for irrigation laterals - specification. When incorporated with adequate quantity of Carbon Black as specified in the clause 4.1 of IS 12786:1989, the pipe made from this grade will meet creep rupture stress requirement of PE-25 class of pipe.

E24065 is a Butane comonomer based Linear Low Density Polyethylene (LLDPE), and designed for extrusion coating applications in blends with LDPE.

These are Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. The grades are designed for blown film applications. They have excellent draw down characteristics with very good impact strength and tear resistance. F18010: Without Slip & Antiblock

Relene F18030 is a butene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants & without Slip & Anti block and is designed for good processing on Cast Film lines with balanced mechanical & optical properties

These are Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. The grades are designed for blown film applications. They have excellent draw down characteristics with very good impact strength and tear resistance. F19010: With Slip & Antiblock

JD22010 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), for Drip lateral applications. Drip laterals produced out of this grade has outstanding processability, tensile and elongation properties. This grade meets the requirements of material as per IS 12786: 1989 on 'Irrigation equipment-Polyethylene pipes for irrigation laterals-specification'. When incorporated with adequate quantity of carbon black as specified in clause 4.1 of IS 12786: 1989,the pipe made from this grade will meet the creep rupture stress requirement of PE-25 class. Additives details: - Heat Stabilizer: Yes

JE24065 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), and designed for extrusion coating applications in blends with LDPE. Additives details: - Heat Stabilizer: Yes

JF18010 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants, but does not contain any slip or antiblock. This grade is designed for flexible packaging applications. It has excellent draw down characteristics with very good toughness, tensile strength and tear resistance. Additives details: - Slip: Nil - An/block: Nil - Heat Stabilizer: Yes

This is a butene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants. This grade does not contain any slip or antiblock, designed for good processing on Blown & Cast Film lines with excellent balance of mechanical & optical properties. Additives details: - Heat Stabilizer: Yes

This is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants, slip and antiblock. This grade is designed for blown film applications. It has excellent draw down characteristics with very good toughness, tensile strength and tear resistance. Additives details: - Slip: Yes - Antiblock: Yes - Heat Stabilizer: Yes

JF19020 is a butene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants, Slip and Antiblock, designed for good processing on Blown & Cast Film lines with balanced mechanical & optical properties. Additives details: - Slip: Yes - Antiblock: Yes - Heat Stabilizer: Yes

JLL36RA045 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. This grade when blended with appropriate quantity of carbon black can withstand continuous exposure. This grade when pulverized into 20-30 mesh powder offers good processability. This grade has very good ESCR and balance of Impact and stiffness. JLL36RA045UV is a UV Stabilized version of JLL36RA045. JLL36RA045: - Heat Stabilizer: Yes - UV Stabilizer: No

JLL36RA045 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. This grade when blended with appropriate quantity of carbon black can withstand continuous exposure. This grade when pulverized into 20-30 mesh powder offers good processability. This grade has very good ESCR and balance of Impact and stiffness. JLL36RA045UV is a UV Stabilized version of JLL36RA045. JLL36RA045UV: - Heat Stabilizer: Yes - UV Stabilizer: Yes

Relene LL24FA030 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE). It is designed for medium voltage insulation compounds for silane cross-linking process. The grade is designed with optimum level of antioxidants.

LL36RA045 is a Butene Comonomer based Linear Medium Density Polyethylene. This grade when blended with appropriate carbon black can withstand continuous exposure. LL36RA045 when pulverised into 20-30 mesh powder offers good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of hardness and impact strength. This grade contains normal dose of antioxidant.

LL36RA045UV is a Butene Comonomer based Linear Medium Density Polyethylene (LLDPE). This grade is stabilised with appropriate quantity of HALS to give a long service with continuous outdoor exposure with or without blending of any carbon black. LL36RA045UV when pulverised into 20-30 mesh powder offers good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of hardness and impact strength. This grade contains normal dose of AO and high dose of UV stabiliser.

M24200 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE) grade with narrow molecular weight distribution and optimum level of antioxidants. It offers excellent processability and is recommended as base resin for preparing masterbatch. It can also be used for producing injection moulded lids, containers, houseware & general purpose articles as this grade exhibits good flexibility and low warpage.

M24300 is a butene comonomer based Linear Low Density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers good fluidity and excellent processability, and is mainly recommended for preparing masterbatch. It can be also used for producing injection moulded lids, containers, houseware & general purpose articles as this grade exhibits good flexibility and low warpage.

M 26500 is a butene comonomer based Linear Low Density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers excellent processability and is mainly recommended for preparing masterbatch. This grade can also be used for producing injection moulded lids, containers, houseware & general purpose articles as it exhibits good flexibility, low warpage and good fluidity.

Relene O18030 is an Octene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants & without Slip & Anti block. The grade is designed for good processing on Cast Film lines with balanced mechanical & optical properties.

O19010 is an octene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidant, antiblocking agent, slip additive and polymer processing aid. The grade is designed to make blown film for ehavy duty applications and liquid packaging, where excellent seal through contamination, toughness, impact strength and tear resistance are desired.

O21010 is an octene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidant and polymer processing aid but without slip additive and antiblocking agent. The grade is designed for lamination film applications where good optical properties and adhesion to the substrate are required.

O35042, is a octene copolymer based Medium Density Polyethylene grade designed for rotational moulding applications. O35042 can be used for producing special products like automotive components, diesel fuel tanks, chemical tanks, manholes, insulated fish crates and pallets. Due to the octene comonomer and medium density of resin, articles exhivit excellent toughness, impact resistance and Environmental Stress Crack Resistance (ESCR).

R 35042 is a Linear Low Density Polyethylene grade designed for rotational moulding applications. R 35042 can be used for producing chemical tanks, water storage tanks, loft tanks milk cans and pallets. Due to the medium density of resin, articles exhibit good toughness, impact resistance and Environmental Stress Crack Resistance (ESCR).

Relene X24065, is a Butene comonomer based Linear Low Density Polyethylene. This grade is designed for XLPE cable compounds. It offers superior Processability, ESCR and Abrasion resistance.

ResMart Ultra MB Black-Polyethylene 50% Black Masterbatch

REVOLOOP™ 70-LL NA recycled plastics resin is a PCR-rich LLDPE resin for film applications that require improved homogeneity, consistency and toughness over other film-based PCR resin offerings. REVOLOOP™ 70-LL NA recycled plastics resin is a PCR-rich solution is designed with 70% recycled content for use in secondary and tertiary packaging and potential use in some non-food contact primary packaging applications.*

Linear Low Density Polyethylene, Black

LLD117UP is a compounded rotomoulding powder resin, with high strength. We can provide different customized colors: UV level from 8-20, also with other functions such as mildew proof and antibacterial.

LLD118UP is a compounded rotomoulding powder resin, with high strength and high flow ability. We can provide different customized colors: UV level from 8-20, also with other functions such as mildew proof and antibacterial.

LLD119UP is a compounded rotomoulding powder Hexene polymer LLDPE resin, with super high strength and UV20; we can provide customized color, and with other functions such as dust free, mildew proof and antibacterial.

LLD300V0P is a modified flame-resistance LLDPE rotomoulding powder resin, providing customized colors, Optional UV level from 4-12, optional dust proof, mildew proof and antibacterial.

LLD3000V2P is a compounded rotomoulding powder LLDPE resin with flame retardant. We can provide different customized colors. UV level optional from 4-12. Also with other optional functions such as mildew proof and antibacterial.