DOW ENDURANCE™ DHDA-7708 BK is a thermoplastic semiconductive compound specifically designed for jacketing over medium, high, and extra-high voltage power cables. It combines the excellent physical properties and low moisture vapor transmission normally associated with Dow insulating jacket materials with the conductivity of thermoplastic semiconductive insulation shielding compounds. In medium voltage cable applications, a semiconductive jacket provides cable endurance and prolongs cable life by reducing neutral-to-ground impulse voltage. The semiconductive jacket enables on-reel cable diagnostic analysis in high and extra-high voltage applications. Compared to conventional thermoplastic semiconductive materials, DOW ENDURANCE™ DHDA-7708 BK offers: - Improved environmental stress-crack resistance - Improved low-temperature properties - Improved thermomechanical properties - Reduced adhesion to strippable insulation shields - Improved cut-through and abrasion resistance - Reduced moisture vapor transmission Details are shown in Figures 1 to 4 Specifications Cables jacketed with DOW ENDURANCE™ DHDA-7708 BK, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - AEIC: CS8, CS9 - ICEA: S-94-649 Type 1, S-108-720 Type 1 - IEC: 60502, 60840, 62067

- Linear Low Density Polyethylene - Excellent tear strength, outstanding toughness - Good processability at narrow die gaps - Complies with U.S. FDA 21 CFR 177.1520(c) 3.1a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Outstanding tear strength, impact strength and toughness - For high performance cast film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with U.S. FDA-DMF - Complies with U.S. FDA-U.S. USP - Complies with EU, No 10/2011 - Consult the regulations for complete details.

DOWLEX™ 2035G Polyethylene Resin is suitable for the production of cast films where low orientation in the film and ease of processing are primary considerations. Applications: - Cast Film Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection Consult the regulations for complete details.

DOWLEX™ 2036.01G Linear Low Density Polyethylene Resin is suitable for the production of cast films with high stiffness, good tear strength and outstanding toughness. It can be used in skin layers of coextreuded cast films made from DOWLEX resins to provide a surface with good slip properties. Complies with: - EU, N0 10/2011 - FDA 21 CRF 177.1520(c) 3.2a. Consult the regulations for complete details.

- Linear Low Density Polyethylene - Improved thermal stability for high stiffness film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with U.S. FDA-DMF - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Improved thermal stability for high stiffness film applications - Complies with -- U.S. FDA 21 CFR 177.1520 (c) 3.2a -- EU, No 10/2011 -- U.S. FDA-DMF -- HPFB (Canada), No Objection -- Consult the regulations for complete details

- Diaper back sheet - For high stiffness film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Fast processing on narrow die gaps - For blown film paper product overwrap applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - U.S. FDA-DMF Consult the regulations for complete details.

DOWLEX™ 2042EC Polyethylene Resin is an ethylene/octene-1 copolymer suitable for the production of blown film requiring good tear strength and outstanding toughness with good stiffness and temperature resistance. Note: DOWLEX 2042EC Polyethylene Resin should comply with FDA regulation 177.1520, Canadian HPFB No Objection (With Limitations) and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations.

- Linear Low Density Polyethylene - Good tear strength, medium stiffness, outstanding toughness - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

DOWLEX 2045.01G Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films. Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery. DOWLEX 2045.01G Polyethylene Resin contains slip and antiblock additives. Applications: - Thin gauge industrial & consumer films - Heavy duty films Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)3.2a - Consult the regulations for complete details.

- For high speed, thin film applications - Additional thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- For high speed, thin film applications - Additional thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- For high speed, thin film applications - Additional thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - For heavy duty film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - For heavy duty applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with ISCC PLUS certification for circular plastics - Canadian HPFB No Objection - Consult the regulations for complete details. DOWLEX™ 2045G CIR Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films . Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For heavy duty applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details DOWLEX™ 2045G Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films . Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For heavy duty applications - Excellent color and thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Consult the regulations for complete details. DOWLEX™ 2045G Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films. Films are made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For heavy duty applications Complies with - U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. DOWLEX™ 2045P Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films. Films made from this resin exhibit a combination of excellent toughness, tear resistance and color stability. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For high performance stretch film applications - Outstanding tear strength, impact strength and toughness Complies with: - U.S. FDA, FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

- Linear Low Density Polyethylene. - For high performance form-fill-seal packaging applications. - Outstanding tear strength, impact strength and toughness. - Formulated with slip and antiblock additives. - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Excellent tear strength and medium stiffness - Outstanding toughness and puncture resistance for films used in food contact applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Excellent tear strength and medium stiffness - Outstanding toughness and puncture resistance for films used in food contact applications - Superior color stability Complies with - U.S. FDA 21 CFR 177.1520 (c) 3.1a. Consult the regulations for complete details.

- Linear Low Density Polyethylene - Improved thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

DOWLEX™ 2064G Polyethyelene Resin is cast extrusion linear low density polyethylene resin grade suitable for artificial turf yarns including slit tapes and monofilaments. Main Characteristics: - Linear Low Density Polyethylene - Improved thermal stability for artificial turf yarns, high stiffness monofilament and tape. Complies with: - U.S. FDA 21 CRF 177.1520(c) 3.2a. Consult the regulations for complete details.