Polyethylene (PE): HDPE
Product | Availability | Product Description |
---|---|---|
Evolue™-H SP6505 | Asia Pacific | |
Exelene® HDPE 30000 | Africa & Middle East |
Applications
- Caps and closures non carbonated beverages
- Housewares, Frozen Food Containers, Aerosol overcaps
Characteristics
- The Exelene resin HDPE 30000 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated “Olefin Polymers” from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.
|
Exelene® HDPE 6007M | Africa & Middle East |
Applications
- Bottles for liquid foods (milk, water, juice) or powdered foods.
- Corrugated pipe, Drain Tile, Composite lumber
Characteristics
- The Exelene resin HDPE 6007M meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.
|
Exelene® HDPE 8000 | Africa & Middle East |
Applications
- Plastic beer, soda or juice boxes
- Fruit and vegetable baskets
Characteristics
- The Exelene resin HDPE 8000 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.
|
Exelene® HDPE 8000UV | Africa & Middle East |
Applications:
- Plastic beer, soda or juice boxes
- Fruit and vegetable baskets
Characteristics:
- The Exelene resin HDPE 8000UV meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.
|
ExxonMobil™ HD 5703 | Latin America |
HD 5703 is a blow molding grade high density polyethylene copolymer with a bimodal molecular weight distribution. It provides a very good balance of stress crack resistance, stiffness and impact strength with excellent processability due to its next generation branched structure.
|
FARALLOY® PE-103 | North America |
FARALLOY PE-103 is a sheet extrusion grade high density polyethylene intended for use in non-aesthetic applications due to the slight surface bloom which will develop with time.
|
FARALLOY® PE-106 | North America |
FARALLOY PE-106 is an extrusion grade, UV resistant, non-blooming flame retardant high density polyethylene formulated to resist ignition as defined by Underwriters' Laboratories 94V-0 test protocol.
|
FARALLOY® PE-201 | North America |
FARALLOY PE-201 is an extrusion grade, talc reinforced, high density polyethylene which is formulated with materials selected to optimize price and performance.
|
FARALLOY® PE-211 | North America |
FARALLOY PE-211 is a sheet extrusion grade polyethylene reinforced with mica to increase stiffness and heat deflection.
|
Formolene® HB4903 | North America |
Formolene® HB4903 is a high performance copolymer that is designed for the most demanding blow molding applications. It is also utilized in many sheeting applications. This resin has exceptional stress crack resistance, excellent surface appearance, good melt strength, and good processability.
Formolene® HB4903 meets all the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520 for food packaging at temperatures not exceeding 212°F (100°C).
|
Formolene® HB5202B | North America |
Formolene® HB5202B is designed for applications requiring excellent stiffness and stress crack resistance properties. It may be used as a blow molding resin or sheet extrusion thermoforming resin.
Formolene® HB5202B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HB5202B2 | North America |
Formolene® HB5202B2 is designed for applications requiring excellent stiffness, impact strength, and excellent stress crack resistance. It may be used as a blow molding resin or sheet extrusion thermoforming resin.
Formolene® HB5202B2 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HB5502A | North America |
Formolene HB5502A is designed for applications requiring excellent stiffness and stress crack resistance properties. It may be used as a general-purpose blow molding resin or sheet extrusion thermoforming resin.
|
Formolene® HB5502F | North America |
Formolene® HB5502F HDPE resin is designed for applications requiring excellent stiffness and stress crack resistance properties. It contains a synthetic antistatic additive which enables it to be used for food contact applications. It may be used as a blow molding resin or sheet extrusion thermoforming resin.
Formolene® HB5502F meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HB5502S1 | North America |
Formolene® HB5502S1 HDPE resin is designed for applications requiring excellent stiffness and stress crack resistance properties. It may be used as a blow molding resin or sheet extrusion thermoforming resin.
Formolene® HB5502S1 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HB5502Z | North America |
Formolene® HB5502Z eliminates the need for including a mold release agent at each machine, by incorporating zinc stearate with the resin. This incorporation assures uniform consistent releasing properties. It may be used as an injection blow molding resin.
Formolene® HB5502Z meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HB6007 | North America |
Formolene® HB6007 is a high quality product for those critical food packaging requirements. It also has excellent stiffness and good stiffness properties.
Formolene® HB6007 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HB6007F | North America |
Formolene® HB6007F is a high quality product for those critical food packaging requirements. It also has good stiffness properties and contains a antistatic additive to help dissipate dust particles on bottle surfaces.
Formolene® HB6007F meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HF3728 | North America |
Formolene® HF3728 is a medium density resin that provides an excellent overall balance of tensile, impact, and tear properties in thin film. Processing performance is excellent on high stalk lines.
Formolene® HF3728 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
|
Formolene® HP4000 | North America |
Formolene ® HP4000 is a high performance copolymer that is designed for the most demanding requirements of non-pressure pipe applications. It has good long-term hoop strength performance, very high melt strength, and outstanding toughness even at low temperatures.
Formolene ® HP4000 meets all requirements of ASTM D4976 - PE 235
Formolene ® HP4000 meets the requirements of ASTM F 2160 and UL651A for use in solid wall HDPE conduit pipe.
Suggested Applications:
Telecommunications Conduit
Non-Pressure Pipe Applications
|
Formolene® HP4401 | North America |
Formolene® HP4401 is a high performance copolymer that is designed for the most demanding requirements of pressure pipe applications. It has good long-term hoop strength performance, very high melt strength, and outstanding toughness even at low temperatures.
Formolene® HP4401 meets all requirements of ASTM D4976 - PE 235.
When blended with the approved color concentrates, Formolene® HP4401 has a cell class of 345464C per ASTM D3350-05, is listed by PPI as a PE3608 material with HDB's of 1,600 psi @ 73°F and 800 psi @ 140°F and meets the requirements of NSF Standard 14/61 for use with potable water. Formolene® HP4401 also qualifies as a PE3408 material under the old ASTM D3350-02a and PPI standards. Formolene® HP4401 also qualifies as a PE80 material per ISO 9080.
|
Formolene® HP4525 | North America |
Formolene ® HP4525 is a high performance copolymer designed for non-pressure pipe applications. It has good long-term hoop strength performance and outstanding toughness even at low temperatures. Overall, it provides an excellent balance of stiffness, and processability in conduit pipe applications.
Formolene HP4525 meets the requirements of ASTM F2160, UL651A and NEMA TC-7. DP4525A also meets a minimum ASTM D3350 Cell Classification of 335430A.
|
Formolene® HP6000 | North America |
Formolene® HP6000 is a high quality product for homopolymer pipe extrusion applications. It has excellent stiffness and good stiffness properties.
|
FUSABOND™ E100 | Africa & Middle East |
FUSABOND™ E100 is an anhydride modified high density polyethylene, mainly intended for use as a component in a blend with other polymers including polyolefins and polyamides. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. Available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.
Uses
- Polymer Modifier
Composition
- High% By Weight Maleic Anhydride
- Graft levels are defined as:
- Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%
|
FUSABOND™ E205 | Africa & Middle East |
FUSABOND™ E204 is an anhydride modified high density polyethylene.
Composition
- Ultra High% By Weight Maleic Anhydride
- Graft levels are defined as:
- Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%
Applications
- Compatibilizer.
- Adhesion promoter between polyolefins, and metal, cellulose, glass.
|
FUSABOND™ E265 | Africa & Middle East |
FUSABOND™ E265 is an anhydride modified high density polyethylene.
Uses
- Polymer Modifier
Composition
- High% By Weight Maleic Anhydride
- Graft levels are defined as:
- Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%
|
Generic HDPE - Glass Fiber | Africa & Middle East |
This data represents typical values that have been calculated from all products classified as: Generic HDPE - Glass Fiber
This information is provided for comparative purposes only.
|
Generic HDPE - Talc | Africa & Middle East |
This data represents typical values that have been calculated from all products classified as: Generic HDPE - Talc
This information is provided for comparative purposes only.
|
Generic HDPE | Africa & Middle East |
This data represents typical values that have been calculated from all products classified as: Generic HDPE
This information is provided for comparative purposes only.
|
G-Lene C43D006 | Asia Pacific |
C43D006 conform to DOT specifications for JFC (jelly filled cables) in telecommunication for insulation applications.
|
G-Lene E45A003 | Asia Pacific |
E45A003 conform to DOT specifications for JFC (jelly filled cables) in telecommunication for sheathing.
|
G-Lene I50A180 | Asia Pacific |
150A180 has excellent process ability with low degree of warpage and is suitable for household items like Buckets, Mug etc.
|
G-Lene I60A080 | Asia Pacific |
160A080 has excellent processability with optimum balance of mechanical properties and low degree of warpage. It is used for General Purpose, Multi Purpose, Vegetable Creates etc.
|
G-Lene I60U080 | Asia Pacific |
160U080 is UV stabilized and has excellent processability with optimum balance or mechanical properties and low degree of warpage. It is widely used in Soft Drink Crates, Vegetable Crates, Milk Crates etc.
|
G-Lene PB48A004 | Asia Pacific |
PB48A004 (HDPE black compound) have been extensively used for coating on steel pipes used for gas transportation. The grade has excellent processability, ESCR, carbon black dispersion, abrasion resistance characteristics etc.
|
G-Lene W50A009 | Asia Pacific |
W50A009 has an excellent processability with an optimum balance of tape strength and elongation. Its application includes woven sacks for Fertilizer Industry, Foodgrain packaging, Sugar, chemicals and Industrial packaging. It is well accepted by the leading processors for high strength (tenacity) stretched tape application.
|
G-Lex B52A003 | Asia Pacific | |
G-Lex B63A003 | Asia Pacific | |
G-Lex E52A003 | Asia Pacific |