Hostalen GM 5010 T3 S red is a high density polyethylene (HDPE), red colored similar RAL 3020 with light stabilizer and high melt viscosity for identification marking stripes for electrical cable protection pipes made from Hostalen GM 5010 T3 black.

Hostalen GM 5010 T3 S yellow is a high density polyethylene (HDPE), yellow colored similar RAL 1018 with light stabilizer and high melt viscosity for identification marking stripes for gas pipes made from Hostalen GM 5010 T3 black.

Hostalen GM 9240 HT is a high density polyethylene characterised by superior toughness and stiffness. Hostalen GM 9240 HT can be converted on HDPE blown film equipment with a homogeneous appearance and very low gel level. The very good bubble stability permits the production of wrinkle free and flat films within a wide range of blow up ratios. Typical applications are carrier and meat bags, inliners for drums, paper bags and FIBC as well as heavy duty bags. This product is not intended for use in medical and pharmaceutical applications.

Hostalen GM 9310 C black is a electrically conductive high density polyethylene (HDPE), black colored similar RAL 9004 with high melt viscosity for pipes, fittings and sheets for application in explosion-proof areas. The product provides good long term hydrostatic strength.

Hostalen GM9350C BLACK is a compounded high molecular weight high density polyethylene. Typical customer applications include fuel tank filler pipes requiring electrical conductivity. It is supplied in pellets and is stabilized with antioxidants for the extrusion process. The product features a very good Enviromental Stress Cracking Resistance (ESCR) and a good chemical resistance. Typical processes include blow molding and injection molding. Hostalen GM9350C BLACK is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.

Hostalen GX 4042 is a high density polyethylene (HDPE) resin used in blow molding and extrusion application. It is delivered in pellet form and contains antioxidants. Hostalen GX 4042 is not intended for use in medical and pharmaceutical applications.

Hostalen ACP 9254 Plus is a high density polyethylene resin which possesses an excellent combination of stiffness and impact performance. Hostalen ACP 9254 Plus can be processed on blown film lines at high output rates with excellent bubble stability, very low gel levels and homogeneous appearance which converters and end-users require for high quality thin and thick film production. Hostalen ACP 9254 Plus can enable the production of films with a very broad conversion window, good lay flat properties and excellent roll configuration. Typical applications are lamination and release films, artificial paper, bags and heavy duty packaging. This product is not intended for use in medical and pharmaceutical applications.

Hostalen GX 5044 is a high density polyethylene with medium molar mass and special narrow molar mass distribution.This grade contains a lubricant. Hostalen GX 5044 is an easy flowing polymer, which shows good processing performance on monofilament production lines. Monofilaments made of Hostalen GX 5044 exhibit excellent tensile properties. Typical customer applications are nets, geotextiles and protective netting in agriculture and building industry. It is used for monofilament applications requiring higher tenacity. This product is not intended for use in medical and pharmaceutical applications.

HYPERTHERM -2399 NT BIMODAL POLYETHYLENE Resin is a Polyethylene resin with raised temperature capability produced using UNIPOL II process technology. This product is intended for use in piping systems where high temperatures and aggressive oxidation conditions exist. Suitable applications include hot and cold potable water. Industrial Standards Compliance: ASTM D 3350: cell classification PE445574A Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - HYPERTHERM 2399 NT BIMODAL POLYETHYLENE Resin -- ASTM PE4710 pipe grade - 1600psi HDB @ 23°C -- ASTM PE4710 pipe grade - 800psi HDB @ 82.2°C NSF International - Natural Pipe - HYPERTHERM 2399 NT BIMODAL POLYETHYLENE Resin -- Standard 14 and 61 Meets requirements of - ASTM F2769, F2623, & F1281

ET509B is a black, high-density polyethylene produced with Sclairtech technology. It is well modified by melt blending to meet the requirements of globla standards and standards of customers' own. It is designed for use as a top-coat in 3-layer pipe coating systems with conventional grafted adhesive (Polyglue LE149V, LE200T, LE100A and LE851P etc). Base PE of ET509B has high physical properties originated from HDPE and blended resins improve ESCR, impact properties and processibility. Together with Polyglue grades for 3-layer PE, ET509B shows highly adjusted pipe coating system available for all pipe coating specification including DIN30670, CSA Z425.21-02, NFA 49-710.

HDPE IS-35955 - Blow Molding Grade Features - IS-35955 is designed for applications requiring excellent stiffness and stress crack resistance properties. - Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Applications - General purpose blow molding and sheet extrusion.

ICORENE® 1050 is a high density polyethylene specifically developed for rotational moulding. This grade is a very fast processing material suitable for use in many different applications. It has a good balance of properties such as toughness and stiffness.

ICORENE® 1314 is a high performance hexene high density polyethylene specifically developed for use in rotational moulding. This grade has been designed for applications requiring good stiffness and toughness. This material can be used in many different rotomoulding applications and for food contact applications. ICORENE® 1314 Black 9001 is TÜV approved, protocolnr 175XS0122-00. ICORENE® 1314 Natural and Black are DiBt approved Z40-25-519 and WRAS approved: 1507503 & 1202543

ICORENE® 1339 is a hexene high density polyethylene specifically developed for use in rotational moulding. This grade has been designed for applications requiring higher stiffness and toughness. ICORENE® 1339 is also available as a Black powder.

Icorene® 1380 is a hexene high density polyethylene specifically developed for use in rotational moulding. This grade has been designed for applications requiring good stiffness and toughness and can be used in many different rotomoulding, including food contact applications. Icorene® 1380 Black 9001 is TUV ECE R34 approved, protocolnr: 185XS0206-00.

ICORENE® 1440 BLK9001 is a UV stabilised hexene high density black polyethylene specifically developed for use in rotational moulding. This grade is typically used by customers to manufacture large water, fuel or chemical tanks and also underground infrastructure parts. ICORENE® 1440 BLK9001 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures). This grade is designed to have improved resistance against the harmful effect of biodiesel fuel. It is not intended for use in medical and pharmaceutical applications.

ICORENE® 1440 is a UV stabilised hexene high density polyethylene specifically developed for use in rotational moulding. This grade is typically used by customers to manufacture large water, fuel or chemical tanks and also underground infrastructure parts. ICORENE® 1440 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures). This grade is designed to have improved resistance against the harmful effect of biodiesel fuel. It is not intended for use in medical and pharmaceutical applications.

ICORENE® 1741 BLACK 9001 is a metallocene high density polyethylene specifically developed for use in rotational moulding. This grade is designed for use in many different rotomoulding applications. It has good overall mouldability, high rigidity and very good toughness.

ICORENE® 1741 is a metallocene high density polyethylene specifically developed for use in rotational moulding. This grade is designed for use in many different rotomoulding applications. It has good overall mouldability, high rigidity and very good toughness.

ICORENE® 3940 is a linear medium density polyethylene developed for rotational molding applications. The resin is fully UV stabilized and suitable for general purpose applications. It has a good balance of properties such as toughness and stiffness.

ICORENE® 4220 is a high density polyethylene for rotational molding applications. The grade is UV stabilized and suitable for applications requiring good stiffness and processability.

ICORENE® 5045 SL is a superlinear high density polyethylene specifically developed for use in rotational moulding.It is designed for high rigidity parts and present a good gloss finish with moulds with glossy, chrome, or nickel finishes. This grade is particularly suitable for the production of multilayer boat. It has very high stiffness, good toughness and scratch resistance combined with good processability.

ICORENE® 5760 is a high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in kayaks and boat applications. It has very high stifness and scratch resistance combined with good processability.

ICORENE® 5775 is a high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in kayaks and boat applications. It has very high stifness and scratch resistance.

ICORENE® N2802 is a premium HDPE powder with an outstanding UV resistance. This grade is recommended for pressure pipe systems in the application fields of natural gas, pressure sewerage.

ICORENE® N2803 is a premium HDPE powder characterized by an excellent dimensional stability, impact strength and a high stiffness. This grade is recommended for use in masterbatch.

ICORENE® N2805 is a premium HDPE powder with a good balance between the processability and mechanical properties. This grade has high gloss and high dimensional stability and is suitable for use in masterbatch or carpetbacking applications.

ICORENE® N2807 is a premium high density polyethylene UV stabilized powder with high stiffness and high impact strength. This grade is mainly used in carpetbacking or masterbatch applications.

ICORENE® N2808 is a gas phase homopolymer HDPE and offers high stiffness, high temperature resistance (antioxidant stabilizers), low water vapour transmission and relatively high grease resistance. This grade has a low gel level. It's typically used for masterbatch applications related to food packaging, release paper and photographic paper.

ICORENE® N2809 is a premium HDPE powder with an outstanding UV resistance. This grade is recommended for pressure pipe systems in the application fields of natural gas, pressure sewerage.

ImerPlast™ IM2 is an HDPE based polyolefin compound designed for use in injection moulding applications. It offers a wide processing window and is characterised by faster processing speeds, good weld line strength, and superb processing consistency. It is suitable for applications where wall sections are >1.5mm.

IM8 is an HDPE based polyolefin compound designed for use in injection moulding applications. It offers a wide processing window and is characterised by faster processing speeds, good flow and mould fill properties, good weld line strength, and superb processing consistency.