ETILINAS BPD 3220 is a LLDPE which is designed for use in silane crosslinking process. It has been developed for LV insulation. It meets the applicable requirements as below when processed using sound extrusion practice and tesing procedure: IEC 6052-1/2; ASTM D1248, Type I, Class A, Cat. 3; ISO 1872/1-PE, KGN, 18-D022.

ETILINAS BPD 4028 is a natural MDPE compound designed specifically for colourable (non black) communication and power cable jacketing. It can be coloured by means of a high quality colour masterbach intended for wire and cable applications. ETILINAS BPD 4028 does not contain UV stabilisation and so cables jacketed with this material must be protected from direct sunlight both in storage and in subsequent installation.

ETILINAS BPD 4038 is designed specifically for the jacketing of communication and power cables. It is based on a special high density copolymer with high environmental stress cracking resistance, abrasion resistance, weather resistance and thermal stability. It meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: IEC 708: IEC 6052, ST7; IEC 840; ASTM D1248, Type II, Class C, 5, Grade W6; BS 6234; 03C, TS2.

ETILINAS BPD 4045 is designed specifically for the jacketing of communication and power cables. It is also recommended for insulation of low voltage aerial cables. It is based on a special high density copolymer with excellent resistance to environmental stress cracking, abrasion, weather and heat deformation. It meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: IEC 60502, ST7; IEC 840; IEC 708; ASTM D1248, Type III, Class C, 5, Grade W8; BS6234: H03C, TS2.

ETILINAS HD12BK is designed specifically for the manufacture of pressure pipe and pipe fittings for use in potable water, drainage, sewage and slurry pipeline systems. ETILINAS HD12BK is based on a special high density copolymer with excellent resistance to environmental stress cracking and abrasion, and meets the ISO classification PE80 for pipe materials.

ETILINAS HD3840UA is a ultra-violet (UV) light stabilised linear medium density polyethylene grade with a narrow molecular weight distribution, supplied in pellet form for use as a rotational moulding grade. Characteristics include: good impact strength, excellent external and internal surface finish, and is UV stabilized. Applications include: rotational moulded items, and injection moulded technical parts and closures.

ETILINAS HD4002AA is a natural polyethylene grade with excellent environmental stress crack resistance and designed primarily for the extrusion of tough, strong ducting used to protect all types of cable. ETILINAS HD4002AA is a high density copolymer grade supplied in pellet form.

ETILINAS HD4202AA is a natural high molecular weight polyethylene designed specifically for extrusion of tough strong ducting used to protect all types of cable. It is based on a special high density copolymer with high resistance to environmental stress cracking and abrasion.

ETILINAS HD5201AA is a high molecular weight Hexene-1 based copolymer grade supplied in pellet form for medium and large blow moulding applications where a combination of excellent environmental stress cracking resistance and good rigidity is required. Characteristics include: excellent environmental stress cracking resistance, good rigidity, high melt strength, and high impact strength. Applications include: high performance blow moulded containers typically of 1-60 liters capacity for packaging aggressive products, robust industrial and technical mouldings, and non-pressure pipe.

ETILINAS HD5218AA is a high density polyethylene with easy melt flow, suitable for thin wall injection moulding applications. Characteristics include: good melt flow, fast process cycles, and low moulding warpage. Applications include: houseware, thin walled containers, and toys.

ETILINAS HD5226AA is an easy flow high density polyethylene suitable for thin wall injection moulding applications. Characteristics include: high flow, fast process cycles, and low moulding warpage. Applications include: houseware, and thin walled containers.

ETILINAS HD5301AA is a high molecular weight pelletised high density polyethylene which is suitable for a wide variety of film applications. Applications include: carrier bags, and thin counter bags.

ETILINAS HD5403AA is a medium molecular weight copolymer grade, supplied in pellet form, which has an optimum balance of properties for use in a wide range of blow moulding and extrusion applications. Characteristics include: easy processing, good rigidity, high environmental stress cracking resistance, and good impact strength. Applications include: blow moulded containers upt to 30 liters capacity for packaging chemicals, most household products, oils and foodstuffs, extruded net, and non-pressure pipe.

ETILINAS HD5739UB is an ultra-violet (UV) light stabilised high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding of heavy duty articles. Characteristics include: high rigidity, extremely high weathering resistance, and high impact resistance, especially at low temperatures. Applications include: large dustbins, pallet boxes, pallets, and technical parts.

ETILINAS HD5740UA is an ultra-violet (UV) light stabilised high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding of heavy duty articles. Characteristics include: high rigidity, good weathering resistance, and high impact resistance, especially at low temperatures. Applications include: large dustbins and pails, pallets, technical parts, pallet boxes, and fish crates.

ETILINAS HD6070UA is an ultra-violet (UV) light stabilised high density polyethylene grade with a narrow molecurlar weight distribution, suitable for a wide range of injection moulding applications. Characteristics include: easy processing, high rigidity, good impact strength, and high warpage resistance. Applications include: crates, boxes, seats, pallets, structural foam, and automotive parts.

ETILINAS LL0207MA is a linear low density polyethylene suitable for a variety of film applications. Characteristics include: high strength, no slip agent, and medium level of antiblocking agent. Applications include: sack films, and other heavy duty films.

ETILINAS LL0209AA is a linear low density polyethylene suitable for a variety of film applications. Characteristics include: low gels content, high strength, and no slip/antiblocking additives. Applications include: sack films, and blown stretchwrap films.

ETILINAS LL0209SA is a linear low density polyethylene suitable for a variety of film applications. Characteristics include: low gels content, high strength, and slip/antiblocking additives. Applications include: food bags, and shopping bags.

ETILINAS LL0220AA is a linear low density polyethylene suitable for a variety of film applications. Characteristics include: low gels content, easy extrusion, and no slip/antiblocking additives. Applications include: liner bags, and blended films.

ETILINAS LL0220SA is a linear low density polyethylene suitable for a variety of film applications. Characteristics include: low gels content, easy extrusion, and slip/antiblocking additives. Applications include: food bags, and thin counter bags.

ETILINAS MD20BK is designed specifically for the manufacture of pipe and pipe fittings for use in potable water, gas and other high performance pressure pipeline systems. ETILINAS MD20BK is based on a special medium density copolymer with exceptionally high resistance to environmental stress cracking and meets the ISO classification PE80 for pipe materials.

ETILINAS MD20YW is designed specifically for the manufacture of pressure pipe and pipe fittings for use in gas distribution systems. ETILINAS MD20YW is based on a special non-cadmium yellow pigmented medium density copolymer with exceptionally high resistance to environmental stress cracking and meets the ISO classificationPE80 for pipe materials.

ETILINAS PC4012 is designed specifically for coating of metal pipes and tubes. ETILINAS PC4012 is based on a special high density copolymer with excellent resistance to environmental stress cracking, and contains suitable additives for ease of coating manufacture and to ensure long term weathering resistance.

ETILINAS PC4020 is designed specifically for coating/cladding of metal pipes and tubes. ETILINAS PC4020 is based on a special medium dencity copolymer with exceptionally high resistance to environmental stress cracking and contains suitable additives necessary for ease of coating manufacture and to ensure long term weathering resistance.