EVA TU 2211-211-00203335-2013, rev.1,2 Production method: co-polymerization of ethylene with vinyl acetate. Application: extrusion and blow molding of technical commodities; articles contacting with foodstuff; wax coating of packing and for packaging of food products; production of insulating materials, gaskets etc.; repairing and sealing of public water supply system units andjoints.

EVA TU 2211-211-00203335-2013, rev.1,2 Production method: co-polymerization of ethylene with vinyl acetate. Application: extrusion and blow molding of technical commodities; articles contacting with foodstuff; wax coating of packing and for packaging of food products; production of insulating materials, gaskets etc.; repairing and sealing of public water supply system units andjoints.

EVA TU 2211-211-00203335-2013, rev.1,2 Production method: co-polymerization of ethylene with vinyl acetate. Application: extrusion and blow molding of technical commodities; articles contacting with foodstuff; wax coating of packing and for packaging of food products; production of insulating materials, gaskets etc.; repairing and sealing of public water supply system units and joints.

EVA TU 2211-211-00203335-2013, rev.1,2 Production method: co-polymerization of ethylene with vinyl acetate. Application: extrusion and blow molding of technical commodities; articles contacting with foodstuff; wax coating of packing and for packaging of food products; production of insulating materials, gaskets etc.;repairing and sealing of public water supply system units andjoints.

EVA TU 2211-211-00203335-2013, rev.1,2 Production method: co-polymerization of ethylene with vinyl acetate. Application: extrusion and blow molding of technical commodities; articles contacting with foodstuff; wax coating of packing and for packaging of food products; production of insulating materials, gaskets etc.; repairing and sealing of public water supply system units and joints.

EVA TU 2211-211-00203335-2013, rev.1,2 Production method: co-polymerization of ethylene with vinyl acetate. Application: extrusion and blow molding of technical commodities; articles contacting with foodstuff; wax coating of packing and for packaging of food products; production of insulating materials, gaskets etc.; repairing and sealing of public water supply system units and joints.

HDPE CABLE COMPOSITIONS GOST 16336-2013 Production method: gas-phase method. Application: HDPE composition of 271-274K Grade is intended for insulating cable sheathing, cable covering and cables.

HDPE EXTRUSION BLOW MOLDING TU 2243-104-00203335-2005, rev. 1-3 Production method: gas-phase method. Application: HDPE composition of 273-83 grade is intended to obtain by extrusion method the products of industrial, cultural and general use as well as articles in contact with foodstuff.

HDPE FILM EXTRUSION TU 2243-127-00203335-2000, rev. 1-7 Production method: gas-phase ethylene copolymerization at low pressure using complex catalysts. Application: HDPE compositions are intended for processing by extrusion method into film used for cold foodstuff packaging and other purposes.

BIMODAL HDPE COMPOSITION TU 2243-175-00203335-2007, rev. 1 -3 Production method: gas-phase method of ethylene copolymerization at low pressure using complex catalysts. Application: PE compositions are intended for the production of pipes and fittings, including those for utility and drinking water supply, for compositions with marking stripes and items produced by blow molding method, as well as making high-strength thick films with thickness of 20µm and greater.

HDPE PIPE EXTRUSION PE100 TU 2243-174-00203335-2007, rev 1-4 Production method: gas-phase method of ethylene copolymerization at low pressure using complex catalysts. Application: PE compositions are intended for the production of pipes and fittings to gas distribution networks, as well as pressure pipes and fittings to utility and drinking cold water supply systems.

HDPE INJECTION MOLDING TU 2243-176-00203335-2007, rev.1-6 Production method: gas-phase method of ethylene copolymerization at low pressure using complex catalysts. Application: polyethylene of PE2NT21-1 3 grade is intended for processing by injection molding method into products for household and domestic use.

HDPE INJECTION MOLDING TU 2243-176-00203335-2007, rev 1-6 Production method: gas-phase method of ethylene copolymerization at low pressure using complex catalysts. Application: polyethylene of PE2NT22-12 grade is intended for processing by injection molding method into products for household and domestic use.

HDPE EXTRUSION BLOW MOLDING TU 2243-188-00203335-2009, rev. 1-4 Production method gas-phase method. Application for blow molded articles.

HDPE EXTRUSION BLOW MOLDING TU 2243-188-00203335-2009, rev. 1-4 Production method gas-phase method. Application for blow molded articles.

HDPE EXTRUSION BLOW MOLDING TU 2243-188-00203335-2009, rev 1-4 Production method: gas-phase method. Application: for blow molded articles.

LDPE FILM EXTRUSION GOST16337-77, rev. 1-3 Production method: low density polyethylene is produced by high pressure ethylene polymerization in tubular reactors and reactors with agitator using radical initiators. Application: production of bags, pipes, fittings, articles designed for foodstuff contact, toys, films and film articles, shaped-molded parts, etc.

LDPE INJECTION MOLDING GOST16337-77, rev. 1-3 Production method: low density polyethylene is produced by high pressure ethylene polymerization in tubular reactors and reactors with agitator using radical initiators. Application: production of bags, pipes, fittings, articles designed for foodstuff contact, toys, films and film articles, shaped-molded parts, etc.

LDPE CABLE COMPOSITIONS GOST 16336-2013 Production method: compositions are produced on the basis of high pressure (low density) polyethylene with stabilizers and other additives. Application: compositions are intended for insulations, coverings and protective covers of wires and cablesthrough extrusion.

LDPE CABLE COMPOSITIONS GOST 16336-2013 Production method: compositions are produced on the basis of high pressure (low density) polyethylene with stabilizers and other additives. Application: compositions are intended for insulations, coverings and protective covers of wires and cablesthrough extrusion.

LDPE INJECTION MOLDING GOST16337-77, rev. 1-3 Production method: low density polyethylene is produced by high pressure ethylene polymerization in tubular reactors and reactors with agitator using radical initiators. Application: production of bags, pipes, fittings, articles designed for foodstuff contact, toys, films and film articles, shaped-molded parts, etc.

LDPE FILM EXTRUSION GOST 16337-77, rev. 1-3 Production method: low density polyethylene is produced by high pressure ethylene polymerization in tubular reactors and reactors with agitator using radical initiators. Application: production of bags, pipes, fittings, articles designed for foodstuff contact, toys, films and film articles, shaped-molded parts, etc.