SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip, Antiblock. Applications: High transparency films, Automatic packaging

SEB853 is a low density polyethylene produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Blends with HDPE, Blends with LLDPE, Low thickness film Process: Cast Film Extrusion

SGD4960 is a high density polyethylene homopolymer especially designed for blow molding processing. It features high density and stiffness combined with high impact resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bottles for food applications such as dairy products and beverages. Containers for non-food applications such as alcohol, cosmetics and lubricant oils. bottles for ethylic alcohol Process: Extrusion Blow Molding.

SGE7252 is a bimodal High Density Polyethylene specially developed for the manufacturing of caps and closures that require high stress cracking resistance. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Sealants, Caps for non-carbonated or low carbonated soft drinks

SGE7252XP is a bimodal high density polyethylene specially developed to manufacturing of caps and closures to beverages and soft drinks with low CO2 content. This grade offers a good balance between chemical and mechanical resistance, good processability and organoleptic properties. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Caps for carbonated soft drinks Process: Compression Molding

SGF4950 is a high-density polyethylene copolymer, developed for the blow-molding segment. It shows well balanced properties between impact and stiffness, combined with high environmental stress cracking resistance and processability. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Tissue and hygiene packaging, Blow molding small volumes, Cosmetic packaging Processes: Compression Molding, Extrusion Blow Molding

SGF4950HS is a High Density Polyethylene, copolymer, offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products. The minimum biobased carbon content of this grade is 95%, determined according to ASTM D6866. Application: Small automotive tanks, Containers from 2 to 20 L for Household and Industrial Chemicals, Air ducts Process: Extrusion Blow Molding.

SGF495OTT is a copolymer high-density polyethylene without optical brightener in it composition, developed for the blow-molding segment with well-balanced properties between impact and stiffness, combined with high environmental stress cracking resistance and processability. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Applications: Tissue and hygiene packaging, Polymer blends, Cosmetic packaging Processes: Extrusion Blow Molding

SGF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Applications: Blow molding small volumes, Dairy based products packaging, Juice packaging, Food packaging, bottles for ethylic alcohol, toys Processes: Extrusion Blow Molding

SGM9450F is a high-density polyethylene, developed for the high molecular weight film extrusion segment produced with bimodal technology. The film produced from this resin has high tenacity and excellent resistance to impact characteristics. This resin has wide molar mass distribution that makes it easier to process. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Film rolls, Geodesic film Process: Blown Film Extrusion

SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Caps, Thin wall parts, Houseware, toys

SHC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Applications: Pallet, Safety helmet, General use crates, Industrial crates Processes: Injection Molding.

SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Horticultural Boxes, Fish crates, General use crates, Industrial crates

SHE150 resin is a High Density Polyethylene that has been specially designed for monofilament extrusion process and provides a good balance of processability, spinnability, knotting strength as well as a very low gels amount. It can also be blended with LLDPE to improve blown film stiffness. It contains processing aid and antioxidant additives. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Film, Ropes, Shading nets, Raschel Process: Extrusion of Monofilaments

SLD4004 is a high pressure low density polyethylene (LDPE). It offers a good balance between mechanical properties and processability. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Blow molded parts; Extrusion films; Foaming sheets. Processes: Blown Film Extrusion, Extrusion Blow Molding

SLH0820/30AF is a LLDPE hexene copolymer produced by Braskem. It offers outstanding processability combined with excellent mechanical properties. Very low gel amount. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866. Additive: Processing Aid, Antiblocking. Applications: Industrial Sacks, Blends with HDPE, Blends with LDPE, Laminates, Bags with valve Process: Blown Film Extrusion

SLH118/21 is a Linear Low Density Polyethylene developed for tubular blown film extrusion. Films obtained with this product show good processing performance balanced with good optical and elongation properties, as well as very low gel amount. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866. Additives: Slip, Antiblock Applications: Blends with HDPE, General use packing, Blends with LDPE, Technical films, Technical films for automatic packaging Process: Blown Film Extrusion

SLH118 is a Linear Low Density Polyethylene developed for blown film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains an oxidant additives. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866 Applications: Blends with HDPE, Industrial Sacks, Blends with LDPE, Stretch Films, Flexible Packaging (Tubular Films), Liners, General use packing, Blends for irrigation pipes Process: Blown film extrusion.

SLH218 is a LLDPE Hexene copolymer produced by Braskem. It shows a good balance between optical properties, mechanical properties (Mainly stretchability), sealability and processability. Very low gel contained. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866. Applications: Blends with HDPE, Stretch Films, Medium voltage XLPE insulation, Liners, Flexible Packaging (Cast Films)., Blends with LDPE, General use packing, Blends for irrigation pipes, Low voltage XLPE insulation, Wire insulation Process: Cast Film Extrusion, Blown Film Extrusion

SLL118/21 is a LLDPE Butene copolymer produced by Braskem. It was specially designed to provide outstanding processing performance. Films obtained with this grade show good physical and optical properties and enhanced sealability. The minimum biobased carbon content of this grade is 87%, determined according to ASTM D6866. Additive: Slip, Antiblock. Applications: Blends with HDPE, Blends with LDPE, Technical films for automatic packaging, Technical films, Liners Process: Blown Film Extrusion

SLL118 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains an oxidant additives. The minimum biobased carbon content of this grade is 87%, determined according to ASTM D6866. Applications: Blends with HDPE, Industrial Sacks, Blends with LDPE, Stretch Films, Flexible Packaging (Tubular Films), Liners, General use packing, Blends for irrigation pipes Process: Blown film extrusion.

SLL318 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for cast film extrusion. Films obtained with this product show good mechanical properties and enhanced sealability. It contains an oxidant additives. The minimum biobased carbon content of this grade is 87%, determined according to ASTM D6866. Applications: Blends with HDPE, Stretch Films, Medium voltage XLPE insulation, Liners, General use packing, Blends for irrigation pipes, Blends with LDPE, Low voltage XLPE insulation, Wire insulation Process: Cast film extrusion

SLL5405S is a LLDPE Butene copolymer produced by Braskem. It is a general purpose product that shows a good processing performance balanced with good mechanical properties as well as sealability. This product has very low gel amount. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Additives: Slip, Antiblocking. Applications: Film Processes: Blown Film Extrusion

SPB208 is a low density polyethylene designed for injection molding. This grade shows excellent processability being indicated for applications where low viscosity is required during processing. Injection molded products with this resin shows good flexibility. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Masterbatches. Covers and injected parts with large flat area.

SPB608 is a low density polyethylene designed for injection molding. This grade shows excellent processability being indicated for applications where low viscosity is required during processing. Injection molded products with this resin shows good flexibility. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Caps, Masterbatches Processes: Injection molding.

SPB681/59 is a low density polyethylene produced under high pressure technology. Films obtained with this product show excellent 'draw down', good sealability and adhesion on paper substrates and low gel content. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Antiblock, Slip. Applications: Laminates, Packing for solid products, Automatic packaging Process: Blown Film Extrusion.

SPB681 is a low density polyethylene developed for film extrusion. This resin has outstanding processability, which provides excellent stability to produce thin films. Films produced with this resin have exceptional optical properties. The minimum carbon biobased content for this grade is 95%, determined according to ASTM D6866. Applications: LLDPE and Blends with HDPE Process: Cast Film Extrusion, Blown film extrusion.

STN7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides STN7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Liquid food packaging, Packing for solid products, Coextruded packaging for food products, such as: cheeses, meats, sausages and sliced products, Flexible packaging., Food packaging, Tissue and hygiene packaging, Flat films for tablecloths, curtains and laminated fabrics, Bottles Processes: Blown Film Extrusion

STS7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides STS7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Antiblocking, Slip agent. Applications: Coextruded packaging for food products, such as: cheeses, meats, sausages and sliced products, High transparency films Process: Blown Film Extrusion.

TN7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides TN7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification. Application: Bottles, Coextruded packaging for food products, such as: cheeses, meats, sausages and sliced products, Flat films for tablecloths, curtains and laminated fabrics, Flexible packaging, Liquid food packaging, Packing for solid products, Tissue and hygiene packaging

The linear low-density polyethylene WCL L004 SCB is obtained from reverse logistic of industrial bags and it has a concentration of 100% recycled material. This product color is white. Applications: Blends with HDPE, Liners, Industrial Sacks, Blends with LDPE, Blends with LLDPE, General use packing Processing: Blown Film Extrusion, Film Extrusion - General Use

The linear low-density polyethylene WCL L004 SCT is obtained from reverse logistic of industrial bags, it has a concentration of 100% recycled material. This product color is transparent. Applications: Industrial Sacks, Blends with LLDPE, Blends with LDPE, Blends with HDPE, General use packing Processing: Blown Film Extrusion, Film Extrusion - General Use

Braskem FLEXUS 7200XP is a Linear Low Density Polyethylene produced through metallocene catalyst with hexene copolymer. The resin have excellent mechanical properties and differentiated performance in optical properties. Applications Stretch films Process Cast film extrusion

Braskem FLEXUS 9200 is a linear low density polyethylene (LLDPE) produced through metallocene catalyst which presents excellent impact and puncture strength, beyond a differential sealing performance comparing with another typical LLDPE. It processing aid and antioxidant additives. Applications: Industrial Sacks, Blends with LDPE, Blends with HDPE, General use packing, Liners Processes: Blown Film Extrusion.

Braskem FLEXUS 9211 is a linear low density polyethylene (LLDPE) produced through metallocene catalyst which presents excellent impact and puncture strength, beyond a differential sealing performance comparing with another typical LLDPE. Additive: Slip medium Blocking medium Processing Aids Medium Level Applications: High performance films, General use packing, Packing for solid products, Packing for liquid products, Technical films for automatic packaging Process: Blown Film Extrusion

Braskem FLEXUS 9212XP is a linear low density polyethylene (LLDPE) produced through metallocene catalyst which presents excellent impact and puncture strength, beyond a differential sealing performance comparing with another typical LLDPE. It contains a special package of slip additives which allow better CoF control after lamination. Applications: High performance adhesive laminates for automatic packaging, General use packing, Coextrusion, Packing for solid products, Packing for liquid products Additive: Slip package in high level Blocking medium Processing Aids Medium Level Process: Blown Film Extrusion

Braskem Flexus Cling is a Linear Low Density Polyethylene. It was specially designed to provide outstanding processing performance and cling properties. Application: Cling layer in stretch films Process: Cast Film Extrusion

UTEC3040 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance and impact strength and low coefficient of friction, what makes it a self-lubricating material. Applications: Applications which require highest wear resistance, Technical and porous parts, filters, compression molded sheets

UTEC3041is an Ultra High Molecular Weight Polyethylene with a molecular weight greater than10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and because it is a self-lubricating material, a low coefficient of friction. Technical and porous parts, filters, compression molded sheets, Applications which require highest wear resistance and the use of pigments and/or additives

UTEC4040 is an Ultra High Molecular Weight Polyethylene with a molecular weight greater than10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and because it is a self-lubricating material, a low coefficient of friction. Applications: Applications which require highest wear resistance, Technical and porous parts, filters, compression molded sheets