SVT2145R is a resin based on ethylene-vinyl acetate copolymer. The product is easily crosslinkable and also shows high compatibility with other thermoplastics resins, inorganic fillers and pigments. Compositions with SVT2145R show high flexibility and fatigue resistance. Cross-linked compound has outstanding abrasion resistance and has a high friction coefficient. The minimum biobased carbon content of this grade is 45%, determined according to ASTM D6866. Applications: Midsole, unisole, insole and flip flop sandals, Compounds for Injection of Auto Parts, Automotives profiles (sealing system), Rotomolded products Additives: Antioxidant Processes: Compression Molding, General Extrusion, Injection Molding

SVT2180 is a copolymer of renewable ethylene with Vinyl Acetate (EVA) mainly used for the production of crosslinked foam sheets and other parts. It is a product with easy processability and high compatibility with mineral fillers, and thermoplastic and elastomeric resins. Other important characteristics are elasticity, flexibility, excellent stress cracking resistance (ESCR), chemical resistance, and low temperature strength. The exclusive morphologic characteristics give an outstanding crosslinkability. The components produced with SVT2180 have the following properties: low weight, resistance to deformation, low shrink, high capacity of s cking and color retention. The minimum biobased carbon content of this grade is 80%, determined according to ASTM D6866. Additives: Antioxidant

DA054B high density polyethylene is based on the reverse logistics of post-consumer packaging with a concentration of 40% recycled material. This product is black in color Applications: Blow molding small volumes, Lubricanting oil packaging Process: Extrusion Blow Molding.

DA061A high density polyethylene is obtained from post-consumer spirit caps with concentration of 55% recycled material. This product is natural in color. Applications: General Injection Molding Processes: Injection molding

DA065A high density polyethylene is obtained from post-consumer packaging with a concentration of 70% recycled material. This product is white in color. Applications: Rigid Packaging - Blow Molding Process: Extrusion Blow Molding.

DA065B high density polyethylene is obtained from post-consumer packaging with a concentration of 70% recycled material. This product is black in color. Applications: Rigid Packaging - Blow Molding Process: Extrusion Blow Molding.

DA073A high density polyethylene is obtained from post-consumer packaging with a 65% concentration of recycled material. This product is white in color. Applications: Caps Processes: Injection molding

DA074A high density polyethylene is obtained from post-consumer packaging with a 50% concentration of recycled material. This product is black in color. Applications: Caps Processes: Injection molding

DAR001A high density polyethylene is obtained from post-consumer packaging with concentration of 50% recycled material. This product is black in color. Applications: Corrugated pipes Processes: Pipes extrusion

The low density linear polyethylene DL085C is obtained from reverse logistics of post-consumer packaging with a concentrtion of 100% recycled material . This product has a yellowish color. Applications: Masterbatches, Flexible packaging. Processes: Blown Film Extrusion, General extrusion.

DL085D linear low density polyethylene is obtained from post-consumer stretch filmes, having a concentration of 51% recycled material. This product has a yellowish color. Applications: Flexible packaging., Stretch Films Processes: Blown Film Extrusion, General extrusion.

DLR 001A is a low density polyethylene is obtained from post-consumer shink, having a concentration of 55% recycled material. This product has a transparent color. Applications: Flexible packaging., Stretch Films Processes: Blown Film Extrusion, General extrusion.

EB853 low density polyethylene produced under high pressure in a Tubular reactor. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Applications: Blends with LLDPE, Blends with HDPE Processes: Cast Film Extrusion.

GE7252XP is a bimodal high density polyethylene developed for the manufacturing of caps and closures for beverages with low or mild carbonation levels. This grade offers a good balance between chemical and mechanical resistance and good processability. Additive: Slip agent Applications: Caps for carbonated soft drinks, Caps for non-carbonated or low carbonated soft drinks, Caps for water Process: Compression Molding, Injection molding.

GF4950HS is a High Density Polyethylene, copolymer, offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products. Applications: Small automotive tanks, Packages up to 20 liters for chemicals, domestic and industrial, Agricultural sprayer, Air ducts Process: Extrusion Blow Molding.

HD3403S is a high density polyethylene with outstanding organoleptic properties in addition to great processability and high stiffiness. Applications: Caps for still water Processes: Compression Molding, Injection Molding

Braskem Idealis500 is the only High Molecular Weight Polyethylene resin in powder form specially designed for the compression molding process. Applications: Applications range from food handling cutting boards and playground toys to technical parts.

High density polyethylene RGR 7A2 WE obtained by reverse logistics of post-consumer recycled polymer. The grade RGR 7A2 WE contains 70% of PCR and 30% of sustainable I'm Green resin, available in white colour (Carbon Neutral). Application: Blow molding Processes: Extrusion Blow Molding

The linear low-density polyethylene RPL 0C1 WE is obtained from reverse logistics of industrial bags and it has a concentration of 100% recycled material. This product color is transparent. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linar low-density polyethylene RPL 0C1 WE is obtained from reverse logistics of industrial bags and it has a concentration of 100% recycled material. This product color is white. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linear low-density polyethylene RPL 4C2 BL is obtained from reverse logistic of industrial bags and it has a concentration of 55% recycled material. This product color is translucent blue. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linear low-density polyethylene RPL 4C5 WE is obtained from reverse logistic of industrial bags and it has a concentration of 55% recycled material. This product color is white. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

High density polyethylene RPR 7A2 WE obtained by reverse logistics of post-consumer recycled polymer. Available in predominantly white colour. Application: Rigid Packaging - Blow Molding, Lubricanting oil packaging Processes: Extrusion Blow Molding

SBC818 is a low density polyethylene developed for coating process, it presents very good optical properties, low neck-in, good film stability, and good adhesion on porous substrate. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: General use articles, Specialty Film - Extrusion Coating, Masterbatches Processes: Extrusion Coating

Description: SBC818R50 is a low density polyethylene developed for coating process, it presents very good optical properties, low neck-in, good film stability, and good adhesion on porous substrate. Additives free. The minimum carbon biobased content of this grade is 50%, determined according to ASTM D6866. Applications: General use articles, Specialty Film - Extrusion Coating, Masterbatches Processes: Extrusion Coating

SBF0323/12HC is a high molecular weight LDPE produced under high pressure technology. Films obtained with this product show outstanding optical properties, excellent mechanical properties, and good shrinkage. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additivation: Slip, Antiblock. Applications: Shrink film., Technical film for liquid packaging Process: Blown Film Extrusion.

SBF0323HC is a high molecular weight grade produced under high pressure technology. Films obtained with this product show excellent mechanical and optical properties. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Heavy duty bags; agriculture, co extruded and shrink films. Flexible containers for cosmetics and pharmaceutical applications (complies with USP 37).

SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip, Antiblock. Applications: High transparency films, Automatic packaging

SEB853 is a low density polyethylene produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Blends with HDPE, Blends with LLDPE, Low thickness film Process: Cast Film Extrusion

SGD4960 is a high density polyethylene homopolymer especially designed for blow molding processing. It features high density and stiffness combined with high impact resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bottles for food applications such as dairy products and beverages. Containers for non-food applications such as alcohol, cosmetics and lubricant oils. bottles for ethylic alcohol Process: Extrusion Blow Molding.

SGE7252 is a bimodal High Density Polyethylene specially developed for the manufacturing of caps and closures that require high stress cracking resistance. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Sealants, Caps for non-carbonated or low carbonated soft drinks

SGE7252XP is a bimodal high density polyethylene specially developed to manufacturing of caps and closures to beverages and soft drinks with low CO2 content. This grade offers a good balance between chemical and mechanical resistance, good processability and organoleptic properties. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Caps for carbonated soft drinks Process: Compression Molding

SGF4950 is a high-density polyethylene copolymer, developed for the blow-molding segment. It shows well balanced properties between impact and stiffness, combined with high environmental stress cracking resistance and processability. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Tissue and hygiene packaging, Blow molding small volumes, Cosmetic packaging Processes: Compression Molding, Extrusion Blow Molding

SGF4950HS is a High Density Polyethylene, copolymer, offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products. The minimum biobased carbon content of this grade is 95%, determined according to ASTM D6866. Application: Small automotive tanks, Containers from 2 to 20 L for Household and Industrial Chemicals, Air ducts Process: Extrusion Blow Molding.

SGF495OTT is a copolymer high-density polyethylene without optical brightener in it composition, developed for the blow-molding segment with well-balanced properties between impact and stiffness, combined with high environmental stress cracking resistance and processability. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Applications: Tissue and hygiene packaging, Polymer blends, Cosmetic packaging Processes: Extrusion Blow Molding

SGF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Applications: Blow molding small volumes, Dairy based products packaging, Juice packaging, Food packaging, bottles for ethylic alcohol, toys Processes: Extrusion Blow Molding

SGM9450F is a high-density polyethylene, developed for the high molecular weight film extrusion segment produced with bimodal technology. The film produced from this resin has high tenacity and excellent resistance to impact characteristics. This resin has wide molar mass distribution that makes it easier to process. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Film rolls, Geodesic film Process: Blown Film Extrusion

SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Caps, Thin wall parts, Houseware, toys

SHC7260 is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. Organoleptic properties are suitable for water caps applications. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Cosmetic packaging, Caps for water, Caps for non-carbonated or low carbonated soft drinks, toys, pallet Process: Injection Molding.

SHC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Applications: Pallet, Safety helmet, General use crates, Industrial crates Processes: Injection Molding.