Description. SABIC® Vestolen A 6060 is a natural bimodal high density polyethylene (HDPE) resin. Typical applications include semi-finished goods like sheets as well as non-pressure pipe applications such as cable conduits. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060R 10000 (black) is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its profile of properties this material is typically used for gas, drinking water and waste water piping. This material meets (inter)national standards for use in gas, drinking water and waste water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060R 65307(blue) is a grade wich has a high densityand a bimodal distribution of the molecular mass. Due to its profile of properties this material is typicallyused fordrinking water piping.This materialmeets (inter)national standards for use indrinking water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060S 62434 (orange-yellow) is a high density polyethylene (HDPE). With its colour similar to RAL 1033 it is typically used for coextrusion of orange-yellow identification stripes on gas pipes out of SABIC® Vestolen A 6060R black. It is stabilized against UV- and thermal degradation. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060S 63363 (brown) is a high density polyethylene (HDPE). With its colour similar to RAL 8023 it is typically used for coextrusion of brown identification stripes on sewage pipes out of SABIC® Vestolen A 6060R black. It is stabilized against UV- and thermal degradation. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060S 65306 (blue) is a high density polyethylene (HDPE). With its colour similar to RAL 5005 it is typically used for coextrusion of blue identification stripes on potable water pipes out of SABIC® Vestolen A 6060R black. It is stabilized against UV- and thermal degradation. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5922R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its resistance against slow crack growth (SCG) the material SABIC® Vestolen A RELY 5922R 10000 is considered as PE100-RC and may be used for no dig applications. Moreover it may be used for the production of thick walled (large diameter and low SDR) pipes for infrastructure and industrial application due to its low sagging characteristics and it shows favorable processing behavior. This material meets (inter)national standards for use in gas, drinking water and waste water piping.MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5923R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its profile of properties this material is typically used for gas and drinking water piping. This material meets (inter)national standards for use in gas, drinking water and waste water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5924R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to the low sag characteristics of this material it may be used for the production of thick walled (large diameter and low SDR) pipes for infrastructure and industrial applications and shows favorable processing behaviour. This material meets (inter)national standards for use in gas, drinking water and waste water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5944HT 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its heat ageing stability SABIC® Vestolen A RELY 5944HT 10000 fulfils PE-RT II thermal stability requirements according to EN ISO 22391-2 by hydrostatic pressure testing. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7115A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ 7115A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7115LA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains slip and antiblock additive. SUPEER™ 7115LA is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ 7118A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118LA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains anti-block and slip agent. SUPEER™ 7118LA is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118LE is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains anti-block and slip agent. SABIC® mLLDPE 7118LE is typically used for applications like heavy duty bags, agriculture film, stretch hood, lamination film, frozen bags. Properties have been measured on blown film of 25 µm (mono layer) and BUR = 2.5 Typical processing conditions for SABIC® mLLDPE 7118LE: processing temperatures 180 - 230 °C. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118NE is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118NE is typically used for applications like heavy duty bags, agriculture film, stretch hood, lamination film, frozen bags. Properties have been measured on blown film of 25 µm and BUR = 2.5 Typical processing conditions for SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118NE : processing temperatures 180 - 230 °C Blow up ratio: 2.0 - 4.0 This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ 7120BE is a metallocene ethylene-hexene copolymer. It has a good processability for film extrusion via cast technology mainly due to its dedicated stabilization package. This grade is typically used to produce thin stiff stretch film for hand wrap and semi-automatic wrapper applications. Stretch film produced with this grade offers increased holding force, impact and puncture resistance. In silage wrap cast film 7120BE it also increases puncture resistance and shows a limiting neck-in. Besides this, SUPEER™ 7120BE can typically be used as booster resin for cast and blown stretch film that contain PCR (Post Consumer Recycling) material. Here it will boost mechanical properties, reduce gels during film extrusion and give smooth process ability. Properties have been measured on cast film of 25 µm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7158A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ 7158A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7158LA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains anti-block and slip agent. SUPEER™ 7158LA is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7318BE is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7318BE is typically used for stretch and lamination films. Processing temperatures 210- 260 °C. Properties have been measured on cast film of 25 µm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7358A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. SUPEER™ 7358A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7358TA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7458A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. SUPEER™ 7458A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8112 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and have excellent processability.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8112L is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and have excellent processability. It contains slip and antiblock additives.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8115 is an ethylene-octene copolymer produced via Nexlene™ Technology. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and has good processablity. The grade offers better performance in terms of tensile properties, stiffness / toughness ratio and optical properties.

SABIC® SUPEER™ 8115L is an ethylene-octene copolymer produced via Nexlene™ Technology. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and has good processablity. The grade offers better performance in terms of tensile properties, stiffness / toughness ratio and optical properties.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8118 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and have excellent processability.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8118L is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and have excellent processability. It contains slip and antiblock additives.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8315 is an ethylene-octene copolymers produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE cast film applications and has excellent impact strength and good transparency. SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8315 contains no slip and no antiblock additives.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) P8200RT is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) P8200RT performs well in a wide range of pipe applications with excellent long-term hydrostatic strength, combined with good surface and superior processibility. It is designed to fulfill all the requirements of DIN 16833 / ISO 24033 for PE-RT Type II.