Alkatane HD0195F is a medium molecular weight High Density Polyethylene grade with high stiffness, good processability, and moisture barrier properties. Film Extrusion: Alkatane HD0195F is well-suited to the production of film for food and product packaging. Numerous other applications benefit from blending Alkatane HD0195F to enhance the stiffness of LDPE / LLDPE based films, including in the core layer of high clarity coextruded films.

Alkadyne HDF193B is a black high molecular weight bimodal PE100 High Density Polyethylene. It is a high performance resin for use in pressure pipes where service life to 100 years is required. Alkadyne HDF193B offers a balance of excellent processing characteristics along with outstanding toughness, chemical resistance and slow crack growth resistance. Alkadyne HDF193B will also provide excellent resistance to the effects of ultra-violet light exposure in outdoor applications due to well dispersed carbon black. Alkadyne HDF193B is suitable for extrusion into a full range of pipes, where High Density, PE 100 type resins are required. In particular, a broad processing window and good sag resistance enables the extrusion of larger bore, thick wall pipe. Alkadyne HDF193B is suitable for use in the transport of a wide range of fluids for industrial, rural and mining applications, including potable water. Suitability for use in any application should be determined by appropriate performance testing. Alkadyne HDF193B complies to AS/NZS 4131 2010 for PE100 type compounds. It is intended to be used in pipes conforming to AS/NZS 4130.

Alkadyne MD0898-1 is a black, high molecular weight MDPE co-polymer, developed as a general purpose extrusion resin for use in wire & cable applications. Alkadyne MD 0898-1 has been designed for uses as a jacketing compound for buried wires and cables where abrasion resistance and cut-through resistance in rocky terrain is required. Suitability for use in any application should be determined by appropriate performance testing.

Alkamax ML1810PS is a metallocene linear low density polyethylene copolymer. This metallocene grade has excellent processability permitting higher production rates. It is designed for high performance film applications requiring maximum toughness and excellent sealing performance. Alkamax ML1810PS is formulated with a high slip level, process stabilisation, process aid and antiblocking additive. Film Extrusion: Alkamax ML1810PS is intended for applications requiring high performance polyethylene resins combined with low COF. Films produced with Alkamax ML1810PS have outstanding toughness, making this grade ideal for use in heavy duty applications or for downgauging existing film structures. In addition, the high performance sealing and hot tack properties of this grade combined with its excellent optical properties make it ideal for lamination and form, fill and seal films. It has been designed for processing on a wide range of blown film extrusion equipment. Addition of a UV stabiliser should be considered where the intended application involves intermittent to extended exposure to sunlight.

ML1710SC is a metallocene linear low density polyethylene copolymer. This metallocene grade is designed for high performance film applications requiring superior optical properties and toughness. ML1710SC is formulated with a process aid and a process stabilisation package. It does not contain slip or antiblocking additives. Film Extrusion: ML1710SC is intended for film applications requiring high performance polyethylene resins. Films produced with ML1710SC have superior clarity and higher gloss, combined with excellent toughness and sealability. ML1710SC is particularly suitable for blown stretch films containing cling additives. This grade allows rapid cling development and a higher ultimate cling level, with excellent puncture resistance and toughness. Addition of a UV stabiliser should be considered where the intended application involves intermittent to extended exposure to sunlight.

Alkamax ML1810PN is a metallocene linear low density polyethylene copolymer. This metallocene grade has excellent processability permitting higher production rates. It is designed for high performance film applications requiring maximum toughness and excellent sealing performance. Alkamax ML1810PN is formulated with a process aid and process stabilisation package. It does not contain slip or antiblocking additives. Film Extrusion: Alkamax ML1810PN is intended for applications requiring high performance polyethylene resins. Films produced with Alkamax ML1810PN have outstanding toughness, making this grade ideal for use in heavy duty applications or for downgauging existing film structures. In addition, the high performance sealing and hot tack properties of this grade combined with its excellent optical properties make it ideal for lamination and form, fill and seal films. It has been designed for processing on a wide range of blown film extrusion equipment. Addition of a UV stabiliser should be considered where the intended application involves intermittent to extended exposure to sunlight.

Alkamax ML2610PN is a metallocene linear low density polyethylene copolymer. This metallocene grade has excellent processability permitting higher production rates and is designed for high performance film applications requiring superior toughness and stiffness. Alkamax ML2610PN is formulated with a process aid and a process stabilisation package. It does not contain slip or antiblocking additives. Film Extrusion: Alkamax ML2610PN is intended for applications requiring high performance polyethylene resins. Films produced with Alkamax ML2610PN have superior stiffness and toughness, which may allow downgauging existing film structures. These properties combined with excellent optical properties and high performance sealing make this grade ideal for heavy duty applications, lamination and form, fill and seal films. It has been designed for processing on a wide range of blown film extrusion equipment. Addition of a UV stabiliser should be considered where the intended application involves intermittent to extended exposure to sunlight.

BHT-free process stabiliser.

ALKAMIX MB6002 is formulated with an antiblock additive at a concentration of 25 percent. ALKAMIX MB6002 can be added to polyethylene during extrusion to reduce the blocking tendency of film. The level required may vary according to desired properties, however the recommended addition level is between 1 to 3 percent. The maximum level of addition of MB6002 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives.

ALKAMIX MB6003 is an antistatic masterbatch based on an Ethoxylated Alkyl Amine compound at a concentration of 2 percent. ALKAMIX MB6003 can be added to polyethylene during extrusion to assist in dissipation of static charge build-up during subsequent conversion of the film. The recommended addition level is 3 percent for gauges less than 100 micron and 2 percent for gauges greater than 100 micron. However, care must be taken when added to very high slip film grades, as both slip (Erucamide or Oleamide) and the antistatic additive (an ethoxylated amine) are surface migratory and their combination on the surface of the film could result in problems with treatment, sealing, printing etc... The maximum level of addition of MB6003 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives.

ALKAMIX MB6005 is a combined slip and antiblock masterbatch based on a linear low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 8 percent and antiblock additive at a concentration of 25 percent. ALKAMIX MB6005 can be added to linear low density polyethylene (LLDPE) during extrusion to reduce film blocking and coefficient of friction. The level required will vary according to desired properties and presence of any other additives, however the recommended addition level is between 1 and 2 percent. The maximum level of addition of MB6005 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 2.5 percent, when added to a polyethylene formulation free of any other additives.

ALKAMIX MB6006 is a processing aid masterbatch based on a fluoropolymer compound at a concentration of 5 percent. ALKAMIX MB6006 can be added to linear low density polyethylene (LLDPE) during extrusion to eliminate melt fracture (Sharkskin) type extrusion defects. The level required will vary according to extrusion equipment and type of LLDPE being used, however the recommended addition level is between 1 and 2 percent. ALKAMIX MB6006 is compatible with the process aid used in Alkatuff film polymers. The maximum level of addition of MB6006 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 5 percent, when added to a polyethylene formulation free of any other additives.

ALKAMIX MB6007 is a slip masterbatch formulated with Oleamide at a concentration of 1.1 percent. ALKAMIX MB6007 can be added to polyethylene during extrusion to reduce the coefficient of friction. The level required will vary according to coefficient of friction desired; gauge of film and other factors such as the presence of other additives (including antiblocks, colourants / pigments, etc...). The maximum level of addition of MB6007 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 15 percent, when added to a polyethylene formulation free of any slip additives.

Antioxidant masterbatch based on BHT to be used when shutting down extrusion lines.

ALKAMIX MB6009 is formulated with an antiblock additive at a concentration of 15 percent. ALKAMIX MB6009 can be added to polythene during extrusion to reduce the blocking tendency of film, particularly where minimum blocking tendency is required. The level required may vary according to desired properties, however the recommended addition level is between 1 to 3 percent. The maximum level of addition of ALKAMIX MB6009 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 6.5 percent, when added to a polyethylene formulation free of any antiblock additives.

ALKAMIX MB6010 is a processing aid masterbatch based on a fluoropolymer compound at a concentration of 10 percent. ALKAMIX MB6010 can be added to linear low density polyethylene (LLDPE) during extrusion to eliminate melt fracture (Sharkskin) type extrusion defects. The level required will vary according to extrusion equipment and type of LLDPE being used, however the recommended addition level is between 0.5 and 1 percent. ALKAMIX MB6010 is compatible with the process aid used in Alkatuff film polymers. The maximum level of addition of MB6010 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 2.5 percent, when added to a polyethylene formulation free of any other additives.

UV stabilised masterbatch.

SAMBA is a slip masterbatch formulated with Erucamide at a concentration of 2 percent. SAMBA can be added to polyethylene during extrusion to reduce the coefficient of friction of films. The level required will vary according to coefficient of friction desired; gauge of film, polymer type (LLDPE, LDPE, etc..) and other factors such as the presence of other additives (including antiblocks, colourants / pigments, etc...). For injection moulded articles, typical addition rates of SAMBA would be 2.0% due to the thickness of the moulded article. Higher addition rates of SAMBA may result in problems with printing or label adhesion, or possibly warpage. The maximum level of addition of SAMBA based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 10 percent, when added to a polyethylene formulation free of any slip additives.

ALKAMIX UHSMB is a combined slip and antiblock masterbatch based on a low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 1.6 percent and antiblock additive at a concentration of 9 percent. ALKAMIX MBUHSMB can be added to low dnsity polyethylene (LDPE) or linear low density polyethylene during extrusion to reduce film blocking and coefficient of friction. The level required will vary according to desired properties and presence of any other additives, however the recommended addition level is 2% to LDPE and 5% to LLPDE. The maximum level of addition of UHSMB based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 12.5 percent, when added to a polyethylene formulation free of any other additives.

Alkatane GE4760 is a medium molecular weight, easy flow High Density Polyethylene blow moulding grade with excellent organoleptic properties. Alkatane GE4760 is particularly suited to the production of water, dairy and fruit juice bottles.

Alkatane GF7660 is a medium molecular weight extrusion blow moulding grade of High Density Polyethylene. This grade exhibits good ESCR and good toughness. Alkatane GF7660 is designed primarily for extrusion blow moulding of small to medium sized containers. Typical applications include detergent and pharmaceutical bottles. Suitability for use in any application should be determined by appropriate performance testing.

Alkatane GF7740F2 is a medium molecular weight extrusion grade of high density polyethylene. Alkatane GF7740F2 is specially formulated for the production of stretched tapes, monofilament and blown film. Suitability for use in any application should be determined by appropriate performance testing.

Alkatane GM4755F is a high molecular weight High Density Polyethylene grade with high toughness and stiffness. Film Extrusion: Alkatane GM4755F is designed for liners and carry bags where high impact, toughness and stiffness are required. It is also suitable for heavy duty films, where it may be blended with LLDPE or LDPE to enhance stiffness and yield strength while retaining toughness.

Alkatane GM7655 is a high molecular weight extrusion blow moulding grade of High Density Polyethylene with extremely good ESCR. Alkatane GM7655 is designed primarily for extrusion blow moulding of small to medium sized containers, where a very high level of ESCR is required. Suitability for use in any application should be determined by appropriate performance testing.

Alkatane HD0390 is an injection moulding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness. Alkatane HD0390 is intended for use in the production of stackable transport, storage and bottle crates and industrial mouldings demanding very good mechanical properties. Addition of a UV stabiliser should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriateperformance testing.

Alkatane HD0790 is an injection moulding grade of High Density Polyethylene with a good balance between flow and impact resistance. Alkatane HD0790 is intended for use in the production of mouldings such as sealant cartridges, crates and closures. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

Alkatane HD0840 is a very high molecular weight High Density Polyethylene copolymer resin, especially formulated for use in large part mouldings where strength and rigidity are of importance. It combines excellent impact strength with good ESCR. Alkatane HD0840 is especially suited for blow moulding drums from 15L to 220L and supported IBC's to 1000L in volume. Suitability for use in any application should be determined by appropriate performance testing. For outdoor applications, an appropriate UV stabilization package should be added.

Alkatane HD1090 is an injection moulding grade of High Density Polyethylene with a good balance between flow and impact resistance. Alkatane HD1090 is intended for use in the production of mouldings such as pails, crates and closures. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

Alkatane HD2090 is a high flow injection moulding grade of High Density Polyethylene. Alkatane HD2090 is intended for the production of housewares and thin-walled containers. Suitability for use in any application should be determined by appropriate performance testing.

Alkatane HD3690 is a high flow injection moulding grade of High Density Polyethylene. Alkatane HD3690 is intended for use in the production of thin-walled injection mouldings. Suitability for use in any application should be determined by appropriate performance testing.

Alkatane HD5148 is a premium quality blow moulding resin specifically designed for use in high speed reciprocating screw blow moulders. It allows maximum production efficiency of reduced weight containers where ESCR is not a requirement. Alkatane HD5148 is primarily intended for the manufacture of milk bottles, cream containers, fruit juice and cordial bottles.

Alkatane HD6400 is a high density polyethylene resin specifically designed for use in high speed reciprocating extrusion blow moulders providing short cycle times for optimum production efficiency. It has high stiffness to enable the production of light weight food containers featuring excellent organoleptic performance. Alkatane HD6400 is primarily intended for the manufacture of milk bottles, cream containers and juice bottles.

Alkatane HDF895 is a medium molecular weight High Density Polyethylene grade with high stiffness and excellent moisture barrier properties. Film Extrusion: Alkatane HDF895 is particularly suitable for the production of film for the packaging of dry foods where low moisture transmission may allow extended shelf life. Numerous other applications benefit from blending Alkatane HDF895 to enhance the stiffness of LDPE / LLDPE based films, including in the core layer of high clarity coextruded films.

Alkatane HD0490 is an injection moulding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness. Alkatane HD0490 is intended for use in the production of stackable transport, storage and bottle crates and industrial mouldings demanding very good mechanical properties. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

Alkathene LD0128MS is a low density polyethylene designed for use in the production of medium gauge (40-80µm) high quality film. Alkathene LD0128MS is formulated with a process stabilisation and antiblock additive package and and an additive (erucamide) designed to confer a medium level of slip. Alkathene LD0128MS is particularly suitable for use in film applications where high clarity, medum to high strength and medium slip are required.

Alkathene LD0220MS is a low density polyethylene designed for use in the production of low gauge (20 - 50µm) high quality film. Alkathene LD0220MS is formulated with a process stabilisation and antiblock additive package and contains an additive (erucamide) designed to provide a medium level of slip. Film Extrusion: Alkathene LD0220MS is intended for use in high quality low gauge applications requiring medium slip, including lamination and overwrap films. It is typically blended with LLDPE for these applications.

Alkathene LD1217 is an extrusion coating grade exhibiting very low odour and taint and excellent heat seal characteristics. It also has good drawdown and very low neck-in allowing low coating weights whilst maintaining very good adhesion to a variety of substances. Alkathene LD1217 is ideally suited for liquid packaging and other sensitive food packaging laminates.

Alkathene LD6622 is a high flow injection moulding grade of low density polyethylene. Alkathene LD6622 is intended for use in the production of thin-walled injection mouldings. LD6622 is not recommended for high stress crack resistance applications. Suitability for use in any application should be determined by appropriate performance testing.

Alkathene LDD201 is a low density polyethylene designed for a variety of medium to heavy gauge (50-150µm) general purpose film applications. Alkathene LDD201 is formulated with a process stabilisation additive package but contains no antiblock or slip additives. Film Extrusion: Alkathene LDD201 is intended for heavy duty bags, shrink film and other medium to heavy gauge films.

Alkathene LDD203 is a low density polyethylene designed for a variety of medium to heavy gauge (50-150µm) general purpose film applications. Alkathene LDD203 is formulated with a process stabilisation and antiblock additive package but contains no slip additives. Film Extrusion: Alkathene LDD203 is intended for heavy duty bags, shrink film and other medium to heavy gauge films that require antiblock.