Polyethylene (PE): SABIC® HDPE
Product | Availability | Product Description |
---|---|---|
SABIC® HDPE PCG3054 | Africa & Middle East |
SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC® HDPE PCG3054 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles.
SABIC® HDPE PCG3054 is typically used for healthcare packaging applications like, syringes, caps and closures, thin wall articles and other parts for medical devices.
Compliance to regulations.
SABIC® HDPE PCG3054 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).
|
SABIC® HDPE PCG453 | Africa & Middle East |
SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC® HDPE PCG453 is typically used for the injection molding of healthcare packaging, caps and closures and other parts for medical packaging. This grade has a very high impact resistance, even at low temperatures.
Compliance to regulations.
SABIC® HDPE PCG453 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).
|
SABIC® HDPE PCG5421 | Africa & Middle East |
SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC® HDPE PCG5421 is typically used for the blow molding of healthcare packaging (bottles and cans). The product features a good stiffness/ESCR balance combined with good process ability.
Compliance to regulations.
SABIC® HDPE PCG5421 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).
|
SABIC® HDPE PCG863 | Africa & Middle East |
SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC® HDPE PCG863 is typically used for the injection molding of healthcare packaging, caps and closures and other parts for medical packaging. It is an easy-to-process, stiff grade.
Compliance to regulations.
SABIC® HDPE PCG863 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).
|
SABIC® HDPE PCGF0863 | Africa & Middle East |
SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC® HDPE PCGF0863 resin is a high density homopolymer with good barrier properties. The grade offers high stiffness, high temperature resistance and relatively high grease resistance. The resin has a low gel level.
SABIC® HDPE PCGF0863 is typically used for flexible packaging, pharmaceuticals and devices and release liners.
Film properties have been measured at cast film of 25 µm. Water vapor permeability at 38 °C and 100 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h.
Compliance to regulations.
SABIC® HDPE PCGF0863 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).
|
SABIC® HDPE T5E01BB | Africa & Middle East |
SABIC® HDPE T5E01BB Blue is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics.
The grade is part of SABIC’s TRUCIRCLE™ portfolio and services.
It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
|
SABIC® HDPE T5E01BG | Africa & Middle East |
SABIC® HDPE T5E01BG Green is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics.
The grade is part of SABIC’s TRUCIRCLE™ portfolio and services.
It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
|
SABIC® HDPE T5E01BN | Africa & Middle East |
SABIC® HDPE T5E01BN Natural is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics.
The grade is part of SABIC’s TRUCIRCLE™ portfolio and services.
It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
|
SABIC® HDPE T5E01BW | Africa & Middle East |
SABIC® HDPE T5E01BW White is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics.
The grade is part of SABIC’s TRUCIRCLE™ portfolio and services.
It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
|
SABIC® HDPE W1464 | Africa & Middle East |
SABIC® HDPE W1464 is a high density polyethylene with a narrow molecular weight distribution.
To this grade, additives are not intentionally added.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
|
SABIC® HDPE Y10048M | Africa & Middle East |
HDPE Y10048M is a High Density Polyethylene having medium molecular weight and a narrow molecular weight distribution for the production of tapes.
|