PEEK with 60% Chopped Carbon Fabric/Tape

PEEK with 60% Continuous Carbon Fiber

Polyetheretherketone (PEEK) Tube

Polyetheretherketone (PEEK) Tube

Polyetheretherketone (PEEK) Tube

Polyetheretherketone, Unfilled, Standard Flow

Polyetheretherketone, Unfilled, Standard Flow

Polyetheretherketone, Unfilled, Standard Flow

Polyetheretherketone, Unfilled, Standard Flow

Polyetheretherketone, Unfilled, Standard Flow

Polyaryletherketone-Fluropolymer compound

PEEK with 30% Glass Fiber

PEEK with 30% Glass Fiber

PEEK Wear Grade

Polyetheretherketone, 30% Carbon Filled

Ceramic filled ESD PEEK for Test Sockets

PEEK with 30% Ceramic Filler

Pyramid KD25: PEEK Lubricated; Standard Flow.

Pyramid KD25: PEEK Lubricated; Standard Flow.

Pyramid KD25: PEEK Lubricated; Standard Flow.

Pyramid KD25: PEEK Lubricated; Standard Flow.

Pyramid® KD4219 is a highly wear resistant, semi-crystalline thermoplastic compound that offers an outstanding combination of strength, toughness, chemical resistance and superior dimensional stability. Comprised of Polyetherketoneketone (PEKK) base resin reinforced with carbon fibers and proprietary lubricants, Pyramid® KD4219 is an ideal choice for sliding and rotational wear components used in environments with temperatures of up to 500°F. Benefits offered by Pyramid® KD4219: - Outstanding Wear Resistance - Limiting PV of 32,000 - 500°F Heat Deflection Temperature Rating @ 264 psi - Extremely High Strength and Stiffness - Excellent Dimensional Stability - Very Good Resistance to Chemicals and Steam - Low Moisture Absorption - Flammability Rated UL V-0 - Easy to Machine into complex configurations Pyramid® KD4219 is offered by Polymics in both resin pellets for injection molding or extrusion and near net shapes for machining. Resin pellets are packaged in boxes or gaylords. To meet the wide ranging needs of machinists and fabricators, Pyramid® KD4219 stock shapes are offered by Polymics in a wide array of both compression molded and injection molded shapes and sizes. Polymics' offerings include plates in sizes from 10"x10" to 12"x18" and thicknesses from 1/4" all the way to 2", rods in diameters from ¼" to 5" in lengths up to 18" long and tubular bars and discs with outer diameters up to 15". Injection molded shapes are available from existing tools in a wide variety of shapes and sizes.

Polyaryletherketone, Wear Grade, with Tg of 320 °F (160 °C)