PET 9230-104X is a 30% glass fiber reinforced flame retarded injection molding grade.

PET 9230-200X is a 30% glass fiber reinforced flame retarded injection molding grade.

LOTTE CHEMICAL PET ACE is the reheat-efficient PET resin. - Increased productivity - Excellent processability , high stress crack resistance and toughness - Low acetaldehyde content Applications - Carbonated beverage bottles

LOTTE CHEMICAL PET BIO is polyester resin produced from biomass-derived monomer. - 30% Bio contents (30% Bio-MEG, 70% petroleum-based PTA) - 28% CO2 reduction compared to petroleum-based PET - Petroleum-based PET’s CO2 emission is 2.37kg CO2/kg - LOTTE CHEMICAL PET BIO’s CO2 emission is 1.696kg CO2 /kg - Shows excellent mechanical properties and heat resistance. Applications - Carbonated beverage bottles, fresh water bottles

LOTTE CHEMICAL PET COOL can be applied to a wide range of packaging products. - Excellent processablility and optical clarity - High stress crack resistance and toughness - Good thermal stability and low acetaldehyde content Applications - Carbonated beverage bottles, fresh water bottles, wide range of uses

LOTTE CHEMICAL PET HIT is Homo-PET Resin. - High IV preservation rate - Good gas barrier properties - Good thermal stability Applications - Hot fillable bottles (Juice, tea, sports drink)

LOTTE CHEMICAL PET HOT is Homo-PET Resin. - Excellent optical clarity - High stress crack resistance and toughness - Good thermal stability Applications - Hot fillable bottles (Juice, tea, sports drink)

Very strong and stiff parts; low coefficient of thermal expansion. Low influence from moisture and temperature to measures and electrical properties Electrically conductive, suitable for continuous discharging of statically-generated electricity.

Thermally conductive. Low warpage.

Easy to print. No warping. High z-strength

PET+ Filament Engineering Grade High quality filament that balances superior mechanical properties and ease of use Flexible Strength More flexible strength than ABS or PLA. Excellent for Wearables and Prototypes Universal Compatibility 1.75mm and 3mm sizes, PET+ is suitable for most FFF Printers. Features: Strong and Flexible 100% Recyclable Easy Adhesion Hydrophobic

Features: - Good process ability - Low preform AA and - Excellent clarity / gloss in bottles Typically used for: Still water application Certifications: PET MarPol IV 76 WB resin is considered safe for food-packaging applications based on compliance with FDA regulation 21 CFR Section 177.1630 & other similar food contact safety regulations.

This is a food grade PET resin suitable for production of hot-? llable bottles by using heatsetting process during blowing.

Features: - Good processability - Excellent clarity/gloss - Properties balanced for wide range of general purpose usages. It is typically used for: - Various foods, beverages, water etc. - Containers for FMCG such as cosmetics, hair-oil, disinfectants - Pharmaceuticals - APET sheet and PET strapping Certifications: PET Marpol IV 80 WB resin is considered safe for food-packaging applications based on compliance with FDA regulation 21 CFR Section 177.1630 & other similar food contact safety regulations.

Features: - Good process ability - Excellent clarity/gloss - Very Good mechanicals It is typically used for: - Carbonated drinks. - Agro chemicals - APET sheet and PET strapping Certifications: PET MarPol IV 84 CB resin is considered safe for food-packaging applications based on compliance with FDA regulation 21 CFR Section 177.1630 & other similar food contact safety regulations.

PET Alloy

APPLICATIONS - Valves - Pistons - Timing Screws - Scraper Blades - Food Product Forming Dies KEY FEATURES - 230°F Coninuous Use Temperature - Superior Chemical Resistance - Very Low Moisture Absorption - FDA and USDA Compliant - 3-A Dairy Compliant

Mfinity™ S7500-PETX-TR is produced from Grade A, 100% post-consumer PET beverage containers that are hot-washed. The color of this product is clear & it is available in flake form.

Mfinity™ S8300-PETX-TR is produced from 100% post-consumer PET beverage containers that are washed, ground into flakes, washed again and decontaminated through a solid-state polycondensation and pelletizing process under conditions dictated by the Letter of Non-Objection (LNO) issued by the Federal Drug Administration (FDA) to the OEM of the de-contamination equipment. The color of the product is transparent/clear. The LNO states that providing post-consumer PET produced in accordance with the terms and conditions of the LNO, the FDA does not object to such post-consumer PET being used to manufacture plastics food packaging for applications where the food is in direct contact with the post-consumer PET package.

Polyester (Polyethylene Terephthalate) 30% Glass Fiber Reinforced

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.

Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.