BG5000J is a degradable polymer that may be used for injection molding or extrusion processing in conventional equipment. Articles such as: fishing nets and strings, fabrics, rope, sheet, containers and paper coating are possible. It is comprised of monomers, 1,4-butanediol, adipic acid and succinic acid (PBSA). The degradation products are carbon dioxide, water and biomass which will occur by natural process in composting environment. Features: - Good Process ability - similar to PP. - Does not produce noxious off gas - Agency rating: US FDA 175.300 EU 10/2011 EC 1907/2006 - In-line drying is needed to control moisture which will cause processing issues - Good Printability without pre-treatment - Good Weldability - Meets requirements for compostable degradable polymers: DIN EN 13492 and ASTM D6400 - Bulk storage possible in dry silo (maintaining a -30 0 F dew point).

BG5000M is a degradable polymer that may be used for extrusion processing in conventional equipment. Excellent product for monofilament and multifilament applications. Articles such as: fishing nets and strings, fabrics, rope, sheet, containers and paper coating are possible. It is comprised of monomers, 1,4-butanediol, adipic acid and succinic acid (PBSA). The degradation products are carbon dioxide, water and biomass which will occur by natural process in composting environment. Features: - Good Process ability - similar to PP. - Does not produce noxious off gas - Agency rating: US FDA 175.300 EU 10/2011 EC 1907/2006 - In-line drying is needed to control moisture which will cause processing issues - Good Printability without pre-treatment - Good Weldability - Meets requirements for compostable degradable polymers: DIN EN 13492 and ASTM D6400 - Bulk storage possible in dry silo (maintaining a -30 0 F dew point).

BioPBS™ is bio-based polybutylene succinate (PBS) produced from polymerization of bio-based succinic acid and 1,4-butanediol. Alike LDPE, BioPBS™ is soft and flexible semi-crystalline polyester with excellent properties suitable for injection molding articles for general purpose. Features: - Good processability and flow ability - Soft and flexible, good impact property - Good dimensional stability - OK COMPOST, OK COMPOST HOME and OK Biodegradable SOIL certified by Vincotte in European Union

BioPBS™ is bio-based polybutylene succinate (PBS) produced from polymerization of bio-based succinic acid and 1,4-butanediol. Alike LDPE, BioPBS™ is soft and flexible semi-crystalline polyester with excellent properties suitable for both blown and cast film extrusion. Features: - Good processability and stable bubble in existing LDPE machine - Suitable as sealant layer for flexible packaging - Suitable to other blown film applications, i.e., bag liners, mulch film, agricultural film, etc. - FD92PM is food contact grade, comply to EU10/2011 - OK COMPOST, OK COMPOST HOME and OK Biodegradable SOIL certified by Vincotte in European Union - Compostable certified by BPI in North America - Compostable and Home Compostable by ABA in Australia - Renewable content certified by DIN CERTCO, JBPA and USDA

BioPBS™ is bio-based polybutylene succinate (PBS) produced from polymerization of bio-based succinic acid and 1,4-butanediol. Alike LDPE, BioPBS™ is soft and flexible semi-crystalline polyester with excellent properties suitable for injection molding articles for general purpose. Features: - Good processability and flow ability, easy ejection of parts from the mold - Soft and flexible, good impact property - Good dimensional stability - Short cycle time - Superior heat resistance compared to other bioplastics - FZ71PM is food contact grade, approved by FDA (FCN No.1574) and JHOSPA, comply to EU10/2011 - OK COMPOST certified by Vincotte in European Union and BPI in North America - Renewable content certified by DIN CERTCO, JBPA and USDA

BioPBS™ is bio-based polybutylene succinate (PBS) produced from polymerization of bio-based succinic acid and 1,4- butanediol. Alike LDPE, BioPBS™ is soft and flexible semi- crystalline polyester with excellent properties suitable for cast extrusion and extrusion coating such as compostable paper cups. Features: - Similar processability as LDPE - Processable in LDPE extrusion coating machine - Excellent adhesion to paper - Superior heat sealability - Excellent printability without pre-treatment - Low coating thickness - Food contact approved by FDA (FCN No.1817) and JHOSPA, and comply to EU10/2011 - OK COMPOST certified by TUV Austria in European Union - Renewable content = 50% - Suitable for use with hot food and beverages up to 100°C

BioPBS™ is bio-based polybutylene succinate (PBS) produced from polymerization of bio-based succinic acid and 1,4-butanediol. Alike LDPE, BioPBS™ is soft and flexible semi-crystalline polyester with excellent properties suitable for blown and cast film extrusion. Features: - Good processability and stable bubble in existing LDPE machine - Mulch films; No collection of the films after harvest for disposal or recycle. Bury into soil and gradually broken down into CO2, water and biomass - Suitable to other blown film applications, i.e., bag liners, agricultural film, etc. - FZ91PM is food contact grade, approved by FDA (FCN No.1574) and JHOSPA, comply to EU10/2011 - OK COMPOST certified by Vincotte in European Union and BPI in North America - Renewable content certified by DIN CERTCO, JBPA and USDA

This data represents typical values that have been calculated from all products classified as: Generic PBS This information is provided for comparative purposes only.

PBIO116289

PBIO116287

PBIO116288

PBIO116289

Biodegradable resins are expected to contribute to the reduction of environmental problems caused by synthetic resins. Since Polybutylene succinate adipate(PBSA) is one of the promising candidates, we have developed a PBSA coating agent RESEM W-465 as an easy-to-use emulsion. By applying W-465 to a substrate such as paper or film and heat-treating it, a coating with PBSA characteristics is easily finished on its surface. Features - Easy to handle. - Provide excellent heat seal performance. - Suitable for such as food contact paper package, because composed of only biodegradable materials and safe materials. Application Area - Heat seal performance for paper coatings. RESEM PBSA emulsions are waterborne coating consisting of Poly butylene succinate adipate(PBSA). The key features are Biodegradable plastic, Biopolymer, Environmetal-frendly coating, food and industrial paper packaging, contribution of circular economy, reduction of waste problems, solvent free, 100% Compostable and heat-sealable agents.This water-based coating is recommended for a wide range of coating applications to develop new products to solve environmental issues.

SAXABIO PBS 106-N001 is a viscous PBS It is used in extrusion as well as in injection moulding.

SAXABIO PBS 118-N001 is a medium viscosity PBS It is used in extrusion as well as in injection moulding.

SAXABIO PBS 128-N001 is a easy flowing PBS It is used in extrusion as well as in injection moulding.

Poly (1, 4-butanediol Succinate) (hereunder PBS) is a kind of fully biodegradable macromolecular polymer that is synthesized from succinic acid and butanediol through a direct process of condensation polymerization. On specific conditions, this material can be finally decomposed safely and innoxiously into simple compounds such as CO2, H2O, etc. PBS has predominant characteristics such as good thermal stability, fine mechanical and processing performance. It can be molding processed in normal plastic fabrication apparatus. Because of its excellent integrated performance, it also can be blended with other fully biodegradable plastic materials to modify the property to satisfy all kinds of manufacturing requirements of plastic products.

Poly (1, 4-butanediol Succinate) (hereunder PBS) is a kind of fully biodegradable macromolecular polymer that is synthesized from succinic acid and butanediol through a direct process of condensation polymerization. On specific conditions, this material can be finally decomposed safely and innoxiously into simple compounds such as CO2, H2O, etc. PBS has predominant characteristics such as good thermal stability, fine mechanical and processing performance. It can be molding processed in normal plastic fabrication apparatus. Because of its excellent integrated performance, it also can be blended with other fully biodegradable plastic materials to modify the property to satisfy all kinds of manufacturing requirements of plastic products.

Poly (1, 4-butanediol Succinate) (hereunder PBS) is a kind of fully biodegradable macromolecular polymer that is synthesized from succinic acid and butanediol through a direct process of condensation polymerization. On specific conditions, this material can be finally decomposed safely and innoxiously into simple compounds such as CO2, H2O, etc. PBS has predominant characteristics such as good thermal stability, fine mechanical and processing performance. It can be molding processed in normal plastic fabrication apparatus. Because of its excellent integrated performance, it also can be blended with other fully biodegradable plastic materials to modify the property to satisfy all kinds of manufacturing requirements of plastic products.